Application of surface-wave tomography to mineral exploration: a case study from Siilinjärvi,Finland

In order to assess the feasibility and validity of surface-wave tomography as a tool for mineral exploration, we present an active seismic three-dimensional case study from the Siilinjärvi mine in Eastern Finland. The aim of the survey is to identify the formation carrying the mineralization in an area south of the main pit, which will be mined in the future. Before acquiring the data, we performed an accurate survey design to maximize data coverage and minimize the time for deployment and recollection of the equipment. We extract path-averaged Rayleigh-wave phase-velocity dispersion curves by means of a two-station method. We invert them using a computationally efficient tomographic code which does not require the computation of phase-velocity maps and inverts directly for one-dimensional S-wave velocity models. The retrieved velocities are in good agreement with the data from a borehole in the vicinity, and the pseudo three–dimensional S-wave velocity volume allows us to identify the geological contact between the formation hosting most of the mineralization and the surrounding rock. We conclude that the proposed method is a valid tool, given the small amount of equipment used and the acceptable amount of time required to process the data.     

Runoff-generated debris flows: Observation of initiation conditions and erosion–deposition dynamics along the channel at Cancia (eastern Italian Alps)

In the Dolomitic region, abundant coarse hillslope sediment is commonly found at the toe of rocky cliffs. Ephemeral channels originate where lower permeability bedrock surfaces concentrate surface runoff. Debris flows initiate along such channels following intense rainfall and determine the progressive erosion and deepening of the channels. Sediment recharge mechanisms include rock fall, dry ravel processes and channel-bank failures. Here we document debris flow activity that took place in an active debris flow basin during the year 2015. The Cancia basin is located on the southwestern slope of Mount Antelao (3264 m a.s.l.) in the dolomitic region of the eastern Italian Alps. The 2.5 km² basin is incised in dolomitic limestone rocks. The data consist of repeated topographic surveys, distributed rainfall measurements, time-lapse (2 s) videos of two events and pore pressure measurements in the channel bed. During July and August 2015, two debris flow events occurred, following similarly intense rainstorms. We compared rainfall data to existing rainfall triggering thresholds and simulated the hydrological response of the headwater catchment with a distributed model in order to estimate the total and peak water discharge. Our data clearly illustrate how debris entrainment along the channel is the main contributor to the overall mobilized volume and that erosion is dominant when the channel slope exceeds 16°. Further downstream, sediment accumulation and depletion occurred alternately for the two successive events, indicating that sediment availability along the channel also influences the flow behaviour along the prevailing-transport reach. The comparison between monitoring data, topographical analysis and hydrological simulation allows the estimation of the average solid concentration of the two events and suggests that debris availability has a significant influence on the debris flow volume. © 2020 John Wiley & Sons, Ltd.     

Tide-induced variability in beach surface moisture: Observations and modelling

The moisture content w_s of a beach surface strongly controls the availability of sand for aeolian transport. Our predictive capability of the spatiotemporal variability in w_s, which depends to a large extent on water table depth, is, however, limited. Here we show that water table fluctuations and surface moisture content observed during a 10-day period on a medium-grained (365μm) planar (1:30) beach can be predicted well with the nonlinear Boussinesq equation extended to include run-up infiltration and a soil–water retention curve under the assumption of hydrostatic equilibrium. On the intertidal part of the beach the water table is observed and predicted to continuously fall from the moment the beach surface emerges from the falling tide to just before it is submerged by the incoming tide. We find that on the lower 30% of the intertidal beach the water table remains within 0.1–0.2 m from the surface and that the sand is always saturated (w_s≈20%, by mass). Higher up on the intertidal beach, the surface can dry to about 5% when the water table has fallen to 0.4–0.5 m beneath the surface. Above the high-tide level the water table is always too deep (>0.5 m) to affect surface moisture and, without precipitation, the sand is dry (w_s < 5 − 8%). Because the water table depth on the emerged part of the intertidal beach increases with time irrespective of whether the (ocean) tide falls or rises, we find no need to include hysteresis (wetting and drying) effects in the surface-moisture modelling. Model simulations suggest that at the present planar beach only the part well above mean sea level can dry sufficiently (w_s < 10%) for sand to become available for aeolian transport. ©2018 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd.     

Towards Quantifying the Likelihood of Water Resource Impacts from Unconventional Gas Development

Gas production from unconventional reservoirs has led to widespread environmental concerns. Despite several excellent reviews of various potential impacts to water resources from unconventional gas production, no study has systematically and quantitatively assessed the potential for these impacts to occur. We use empirical evidence and numerical and analytical models to quantify the likelihood of surface water and groundwater contamination, and shallow aquifer depletion from unconventional gas developments. These likelihoods are not intended to be exact. They provide a starting point for comparing the probabilities of adverse impacts between types of water resources and pathways. This analysis provides much needed insight into what are “probable” rather than simply “possible” impacts. The results suggest that the most likely water resource impacts are surface water and groundwater contamination from spills at the well pad, which can be as high as 1 in 10 and 1 in 100 for each gas well, respectively. For wells that are hydraulically fractured, the likelihood of contamination due to inter-aquifer leakage is 1 in 10⁶ or lower (dependent on the separation distance between the production formation and the aquifer). For gas-bearing formations that were initially over-pressurized, the potential for contamination from inter-aquifer leakage after production ceases could be as high as 1 in 400 where the separation between gas formation and shallow aquifer is 500 m, but will be much lower for greater separation distances (more characteristic of shale gas).     

Seismic-induced rockfalls and landslide dam following the October 30, 2016 earthquake in Central Italy

On October 30, 2016, a seismic event and its aftershocks produced diffuse landslides along the SP 209 road in the Nera River Gorge (Central Italy). Due to the steep slopes and the outcropping of highly fractured and bedded limestone, several rockfalls were triggered, of which the main event occurred on the slope of Mount Sasso Pizzuto. The seismic shock acted on a rock wedge that, after an initial slide, developed into a rockfall. The debris accumulation blocked the SP 209 road and dammed the Nera River, forming a small lake. The river discharge was around 3.6 m³/s; the water overtopped the dam and flooded the road. By a preliminary topographic survey, we estimated that the debris accumulation covers an area of about 16,500 m², while the volume is around 70,000 m³. The maximum volume occupied by the pre-existing talus mobilized by the rockfall is about 20% of the total volume. Besides blocking the road, the rockfall damaged a bridge severely, while, downstream of the dam, the water flow caused erosion of a road embankment. A rockfall protection gallery, a few hundred meters downstream of the dam, was damaged during the event. Other elastic nets and rigid barriers were not sufficient to protect the road from single-block rockfalls, with volumes around 1–2 m³. Considering the geological and geomorphological conditions, as well as the high seismicity and the socioeconomic importance of the area, a review of the entire rockfall protection systems is required to ensure protection of critical infrastructure and local communities.     

A Correction on Coastal Heads for Groundwater Flow Models

We introduce a simple correction to coastal heads for constant‐density groundwater flow models that contain a coastal boundary, based on previous analytical solutions for interface flow. The results demonstrate that accurate discharge to the sea in confined aquifers can be obtained by direct application of Darcy's law (for constant‐density flow) if the coastal heads are corrected to ((α + 1)/α)h_s ? B/2α, in which h_s is the mean sea level above the aquifer base, B is the aquifer thickness, and α is the density factor. For unconfined aquifers, the coastal head should be assigned the value . The accuracy of using these corrections is demonstrated by consistency between constant‐density Darcy's solution and variable‐density flow numerical simulations. The errors introduced by adopting two previous approaches (i.e., no correction and using the equivalent fresh water head at the middle position of the aquifer to represent the hydraulic head at the coastal boundary) are evaluated. Sensitivity analysis shows that errors in discharge to the sea could be larger than 100% for typical coastal aquifer parameter ranges. The location of observation wells relative to the toe is a key factor controlling the estimation error, as it determines the relative aquifer length of constant‐density flow relative to variable‐density flow. The coastal head correction method introduced in this study facilitates the rapid and accurate estimation of the fresh water flux from a given hydraulic head measurement and allows for an improved representation of the coastal boundary condition in regional constant‐density groundwater flow models.     

Comparison of web plate numerical models for self‐centering steel plate shear walls

Previous research has shown that self‐centering steel plate shear walls (SC‐SPSWs) are capable of achieving enhanced seismic performance at multiple hazard levels, including recentering following design‐level earthquakes. When modeling SC‐SPSWs numerically, these studies considered an idealized tension‐only steel plate shear wall (SPSW) web plate behavior. Research has shown that web plate behavior is more complex than predicted by the idealized model, and web plates can provide more strength, stiffness, and energy dissipation than predicted by the idealized model. The idealized model of web plate behavior is used widely in SPSW numerical models where the moment‐resisting boundary frame provides supplemental hysteretic damping and stiffness; however, in SC‐SPSWs, where the post‐tensioned boundary frame is designed to remain elastic during an earthquake, accounting for the more complex web plate behavior can have a significant impact on seismic performance estimates from numerical simulation. This paper presents different methods for modeling SC‐SPSWs. Responses from these models are compared with experimental results. A simple modification of the tension‐only model, referred to as the tension‐compression strip model, is shown to provide a reasonable approximation of SC‐SPSW behavior. Results from nonlinear response history analyses of SC‐SPSWs with the tension‐only and tension‐compression web plate models are compared to assess how the approximation of web plate behavior affects SC‐SPSW seismic performance. Copyright © 2015 John Wiley & Sons, Ltd.     

Recent shifts in coastline change and shoreline stabilization linked to storm climate change

Since cuspate coastlines are especially sensitive to changes in wave climate, they serve as potential indicators of initial responses to changing wave conditions. Previous work demonstrates that Cape Hatteras and Cape Lookout, North Carolina, which are largely unaffected by shoreline stabilization efforts, have become increasingly asymmetric over the past 30 years, consistent with model predictions for coastline response to increases in Atlantic Ocean summer wave heights and resulting changes in the distribution of wave‐approach angles. Historic and recent shoreline change observations for Cape Fear, North Carolina, and model simulations of coastline response to an increasingly asymmetric wave climate in the presence of beach nourishment, produce comparable differences in shoreline change rates in response to changes in wave climate. Results suggest that the effect of beach nourishment is to compensate for – and therefore to mask – natural responses to wave climate change that might otherwise be discernible in patterns of shoreline change alone. Therefore, this case study suggests that the effects of wave climate change on human‐modified coastlines may be detectable in the spatial and temporal patterns of shoreline stabilization activities. Similar analyses of cuspate features in areas where the change in wave climate is less pronounced (i.e. Fishing Point, Maryland/Virginia) and where local geology appears to exert control on coastline shape (i.e. Cape Canaveral, Florida), suggest that changes in shoreline configuration that may be arising from shifting wave climate are currently limited to sandy wave‐dominated coastlines where the change in wave climate has been most pronounced. However, if hurricane‐generated wave heights continue to increase, large‐scale shifts in patterns of erosion and accretion will likely extend beyond sensitive cuspate features as the larger‐scale coastline shape comes into equilibrium with changing wave conditions. Copyright © 2014 John Wiley & Sons, Ltd.     

The performance of churches in the 2012 Emilia earthquakes

In this study the damage suffered by churches during the 2012 Emilia seismic sequence in Italy is analysed, based on surveys and inspections carried out in the area. Similarly to what was observed after other Italian earthquakes, the damage to churches was severe. However, the Emilia churches present some characteristic features such as the use of unreinforced clay brick masonry. In order to appropriately address the performance of this class of buildings, typical architectural layouts and construction techniques are described. Such techniques are interpreted also in the light of the local seismic catalogue. Fifty churches are then selected and their damage is studied, with reference to typical local-collapse mechanisms of different macro-elements. The study highlights that the damage is often concentrated at the top section of the façade, in the clerestory walls, in the vaults and in the bell towers. Structural analyses are performed to explain some of the observations. The overturning of the top section of the façade is analytically addressed, modelling the friction interlocking. With reference to the case study of San Francesco in Mirandola, non-linear static and dynamic analyses allow us to correlate the directionality of damage to the higher seismic demand along the NS direction, to point out the negligible role of the large vertical component of ground motion and to emphasise the relevance of the buttresses for the seismic response of the façade.