Monitoring the status of a mechanical cable while in operation by means of the acoustic emission method

The mechanical cable is an essential element in towing operations, remote control of equipment, salvage operations, civil engineering applications, etc.Failure of these cables can result in loss of life and loss of equipment worth hundreds of thousands of dollars. Obviously then, sensors that can indicate the condition of these cables so that the risk to their continued use and their remaining safe life can be determined when in operation are very important from the point of view of commercial and military interest.This paper presents a brief review of research into failure mechanisms of various cables and the acoustic emission signatures of the various cables under simulated loading. The development of a specific operational monitor for a towed cable system is also given.     

Oxidative stress in Laeonereis acuta (Polychaeta, Nereididae): environmental and seasonal effects

Laeonereis acuta was seasonally collected in an industrially polluted site (P) and in an unpolluted site (UP) at the Patos Lagoon estuary (southern Brazil). Glutathione S-transferase (GST), superoxide dismutase (SOD) and catalase (CAT) activity (U/mg protein) was determined in five groups of worms from each site. Metallothionein (MT - mol GSH/g ww) and lipid peroxides content (LPO - nmoles of cumene hydroperoxide/g ww) were also measured. Annual mean values for CAT (UP=3.7+/-0.3; P=5.7+/-0.6), GST (UP=0.034+/-0.003; P=0.045+/-0.004) and MT (UP=0.15+/-0.02; P=0.23+/-0.03) were higher (p<0.05) in worms from the P site. In autumn, CAT activity was higher (p<0.05) in worms from the P site (7.6 +/- 1.3) than in those from the UP site (3.6 +/- 0.4). In summer, MT concentration was higher in worms from the P site (0.37 +/- 0.03) than in those from the UP site (0.19 +/- 0.01). No significant difference (p>0.05) in the LPO content was observed in worms from the different sites or collected in different seasons. These results indicate that worms from the polluted site showed higher antioxidant responses than those from the unpolluted site, sufficient to prevent oxidative damage in terms of LPO.     

Late Pleistocene vertebrate-bearing deposits at San Teodoro Cave (North-Eastern Sicily): Preliminary data on faunal diversification and chronology

This paper deals with the chronology and the possible correlations among levels of different excavated areas in the Pleistocene vertebrate-bearing deposits at the large San Teodoro Cave (North-Eastern Sicily). Two trenches have been excavated along the eastern side of the cave, located at a distance from the entrance, respectively, of 8 m (α trench) and 28 m (β trench) and at different depths. Lithological features, biometrical data from small mammals and ecological data from molluscs point to similar environmental conditions for the α trench deposits and those located along the eastern wall of the cave in the eastern part of the β trench. The same evidence, and the taphonomic features of large mammals, points to different environmental conditions and perhaps to different ages for the deposits located in the western part of the β trench. The survival of elephants in Sicily up to 32,000 years ago is a new significant result of the ²³⁰Th/²³⁴U dating carried out from a concretionary stratum from the β trench and represents the youngest elephant survival in the western Mediterranean islands.     

Estimating groundwater evapotranspiration rates using diurnal water-table fluctuations in a semi-arid riparian zone

In semi-arid climates, phreatophytes draw on shallow aquifers, and groundwater evapotranspiration (ET_G) is a principal component of groundwater budgets. Diurnal water table fluctuations, which often are a product of ET_G, were monitored in the riparian zone of Red Canyon Creek, Wyoming, USA. These fluctuations were higher in a riparian wetland (2–36 mm) than a grass-covered meadow (1–6 mm). The onset and cessation of water-table fluctuations correspond to daily temperatures relative to freezing. Spatial differences were due to vegetation type and specific yield, while temporal changes were due to vegetation dormancy. Ratios of ET_G to potential evapotranspiration (PET), K _c,GW, were similar to ratios of actual evapotranspiration (ET) to PET, K _c, in semi-arid rangelands. Before vegetation senescence, K _c,GW increased between precipitation events, suggesting phreatophytes pull more water from the saturated zone as soil moisture decreases. In contrast, K _c decreases with soil moisture following precipitation events as ET becomes increasingly water-limited. Error in ET_G is primarily from estimates of specific yield (S _y), which is difficult to quantify in heterogeneous sediments. ET_G values may be more reliable because the range of acceptable S _y is smaller than K _c and S _y does not change with vegetation type or soil moisture.     

Structural similarity and variety at the tips in a wide range of strike–slip faults: a review

Strike–slip faults are often accompanied by a variety of structures, particularly at their tips. The zones of additional fracturing are classified as tip‐damage zones. These zones can be subdivided into several different damage patterns based on the nature and orientation of faults and fractures developed. Damage zones at the ends of small strike–slip faults (mode II tips) develop wing cracks, horsetail splays, antithetic faults, synthetic branch faults and solution surfaces. Similar tip‐damage patterns are also commonly observed at larger (regional) scales, but with a dominance of faulting over tensile cracks and solution surfaces. Wing cracks and horsetail splays developed at small‐scale faults are replaced by normal faults in large‐scale faults. Antithetic faults and synthetic branch faults are observed at small and large scales. Thrust faults are developed at large scales, in a similar pattern to solution surfaces at a small scale. All these structures may show slightly different angular relationships to the master fault at small and large scale, but develop in response similar stress distribution and mechanics around the fault. Thus, mode II tip‐damage zones show similar patterns over a wide range of fault scales.     

Food Deserts in the Prairies? Supermarket Accessibility and Neighborhood Need in Edmonton,Canada*

The U.S. and U.K. literatures have discussed “food deserts,” reflecting populated, typically urban, low‐income areas with limited access to full‐service supermarkets. Less is known about supermarket accessibility within Canadian cities. This article uses the minimum distance and coverage methods to determine supermarket accessibility within the city of Edmonton, Canada, with a focus on high‐need and inner‐city neighborhoods. The results show that for 1999 both of these areas generally had higher accessibility than the remainder of the city, but six high‐need neighborhoods had poor supermarket accessibility. We conclude by examining potential reasons for differences in supermarket accessibility between Canadian, U.S., and U.K. cities.     

Deformability characteristics of brazilian laterites

This paper summarizes the resilient and permanent deformation characteristics of laterite gravels, determined by cyclic loading in triaxial tests of compacted specimens. A study of laterite pavements was carried out on eight paved road sections in the state of Mato Grosso. Also reported is the influence of fine sand admixture, specimen size and soaking in two laterite samples from Roraima and Rondônia in the North of Brazil. The experimental relationships of resilient moduli against applied stresses are interpreted empirically for models what may be incorporated in a structural analysis of full depth of laterite pavement.     

Structural damage detection using the optimal weights of the approximating artificial neural networks

This work presents a novel neural network‐based approach to detect structural damage. The proposed approach comprises two steps. The first step, system identification, involves using neural system identification networks (NSINs) to identify the undamaged and damaged states of a structural system. The partial derivatives of the outputs with respect to the inputs of the NSIN, which identifies the system in a certain undamaged or damaged state, have a negligible variation with different system errors. This loosely defined unique property enables these partial derivatives to quantitatively indicate system damage from the model parameters. The second step, structural damage detection, involves using the neural damage detection network (NDDN) to detect the location and extent of the structural damage. The input to the NDDN is taken as the aforementioned partial derivatives of NSIN, and the output of the NDDN identifies the damage level for each member in the structure. Moreover, SDOF and MDOF examples are presented to demonstrate the feasibility of using the proposed method for damage detection of linear structures. Copyright © 2001 John Wiley & Sons, Ltd.     

A mathematical hysteretic model for elastomeric isolation bearings

An analytical model for high damping elastomeric isolation bearings is presented in this paper. The model is used to describe mathematically the damping force and restoring force of the rubber material and bearing. Ten parameters to be identified from cyclic loading tests are included in the model. The sensitivity of the ten parameters in affecting the model is examined. These ten parameters are functions of a number of influence factors on the elastomer such as the rubber compound, Mullins effect, scragging effect, frequency, temperature and axial load. In this study, however, only the Mullins effect, scragging effect, frequency and temperature are investigated. Both material tests and shaking table tests were performed to validate the proposed model. Based on the comparison between the experimental and the analytical results, it is found that the proposed analytical model is capable of predicting the shear force–displacement hysteresis very accurately for both rubber material and bearing under cyclic loading reversals. The seismic response time histories of the bearing can also be captured, using the proposed analytical model, with a practically acceptable precision. Copyright © 2002 John Wiley & Sons, Ltd.