海洋科考船即时通信技术支持能力及应用研究

当今通信技术的发展和应用已渗透到人类社会的各个领域,对社会发展产生巨大影响。在海洋领域,通信技术经历多次重大跨越,从最原始的旗语到现在的卫星移动通信,海陆之间的联系已经变得较为便利。但目前我国海陆即时通信技术还不够完善,给科考船的深远海作业带来诸多不便,轻则影响作业进度,重则造成巨额经济损失甚至人员伤亡。在卫星电话、电子邮件等通信方式存在信号不稳定、直观性差、即时性低等弊端的情况下,研究和开发较为成熟的海陆即时通信技术极为必要。文章探讨科考船在海上作业期间与陆地进行即时通信的方法和可行性,为今后这项技术的发展提供参考。     

柴达木盆地北缘富氦天然气的发现——兼议成藏地质条件

在柴达木盆地北缘全吉山、团鱼山地区的煤炭钻孔和泥页岩解吸气中发现了体积分数较高的氦气显示。对2个地区的6件样品进行甲烷C同位素和He同位素分析,其中2个样品的δ13C1值分别为-38.4‰和-39.9‰,属于有机成因。4个样品的3He/4He同位素测试结果在0.03×10-6~1.3×10-6之间,表明氦气来源以壳源氦为主,个别样品有少量幔源氦加入。通过区域背景资料和物探资料分析认为,柴北缘壳源成因的氦可能主要来源于基底富U、Th花岗岩体的放射性衰变,而柴北缘的山前深大断裂则可为氦的运移提供良好通道。氦气产生后,在垂向运移过程中结合其他烃类或非烃类气体,在侏罗系、古近系—新近系良好的储盖条件下,有可能形成独特的富氦天然气富集。     

新疆乌恰萨热克铜矿北矿带库孜贡苏组沉积相、古流向、物源区及其找矿意义——来自砾石统计分析的证据

萨热克盆地库孜贡苏组是萨热克铜矿的赋矿层位,开展沉积相、物源区及古流向研究对隐伏铜矿的勘探具有重要意义。选取萨热克铜矿北矿带库孜贡苏组地表矿化最好的砾岩展开砾石统计分析,结果表明,偏斜度显示砾岩为冲积扇相沉积,砾石叠瓦状和砂岩斜层理产状统计显示古流向为北北东向;砾石成分主要为石英、石英砂岩、砂岩,石英岩等;粒度分布呈宽峰态或尖峰态;物源区为元古宇长城系阿克苏群变质岩剥蚀区;物源补给分为主河流补给和支河流补给2种方式。冲积扇相、古流向、物源区分析确定了矿体的范围、最优的勘探线布置方位和潜在的找矿靶区,具有很好的勘探意义。     

多波束测深数据处理关键技术研究进展与展望

简要介绍了多波束测深系统的基本组成及测深数据处理的基本流程,重点论述了多波束测深数据处理涉及的几项关键技术,详细分析评述了近期国内外在该研究领域取得的主要突破和进展,展望了多波束测深技术下一阶段的发展方向,针对国内应用需求,提出了一些具有前瞻性的研究开发建议。     

长江河口主槽地貌形态观测与分析

人类活动可以改变流域至河口的泥沙输运与沉积。尽管一些近期的研究已经调查了长江河口的形态演变,然而,流域和河口工程如何影响河口河床的形态演变仍然是不清楚的。该文利用2010年至2015年多波束测深系统和浅地层剖面仪等先进现场测量仪器的长江口主槽走航测量资料,并结合主槽表层沉积物资料,分析了近年来人为强干扰下的长江河口主槽底床微地貌形态,以理解近期人类活动对河口的影响。结果显示:近年来长江河口主槽底床上除了存在平床、沙波、冲沟和冲刷痕等常见微地貌形态外,还存在着疏浚痕和凹坑等人为微地貌形态。在流域和河口大型工程的共同影响下,近年来南北港中上段、横沙通道和南槽上段均受到不同程度的冲刷,其主槽底床上呈现出不同程度冲沟和冲刷痕等侵蚀性微地貌。而由于疏浚工程的影响,南港下段、圆圆沙航槽和北槽航道底床上出现了大范围的疏浚痕和凹坑。近年来包括南槽上段、北槽主槽中段和下段的局部区域和北港拦门沙河段局部区域在内的长江河口最大浑浊带的河床沉积物有粗化趋势。南北港中上段和横沙通道的大部分区域均发育了大量沙波微地貌;总体上,长江河口沙波的波高在0.12~3.12 m,波长在2.83~127.89 m,波高/波长在0.003~0.136,长江河口中上段的沙波尺度(波高的均值为0.91 m,波长的均值为20.08 m)大于密西西比河下游(波高的均值为0.87 m,波长的均值为17.62 m),且两区域沙波的几何形态差异性较小。     

S-101与S-57分类编码对比分析(三):复杂结构

地理要素的分类编码是人类认知地理信息世界的成果,也是人类对地理信息世界再认知的入口和关键。在海洋地理信息领域,S-101数据标准即将替代现行S-57 ENC标准,分类编码方案也将会相应改变。从复杂要素、复杂属性两方面内容,对新旧两套分类编码进行对比分析,为涉海人员消化吸收新标准提供一定的参考。     

江西牛形坝-柳木坑金银铅锌多金属矿床铋矿物类型及指示意义

江西银坑矿田的牛形坝-柳木坑矿床是赣南于都-赣县矿集区典型的金银铅锌多金属矿床。根据野外调研、系统矿相学研究和电子探针成分分析,表明铋在牛形坝-柳木坑矿床中是一种重要的伴生矿化金属元素,呈独立矿物或呈微细矿物包体分布在早期硫化物内部或边缘。铋矿物种类丰富,主要包括块硫铋银矿、硫铋银矿、板硫铋铜铅矿、针硫铋铅矿、硫铜铋矿、库辉铋铜铅矿、辉碲铋矿等。与同一矿集区石英脉型盘古山钨铋矿床相比,两矿床铋矿物种类均出现Pb-Ag-Bi-S、Te-Bi-S元素组合,赋存形式和含量有所不同,Cu-Pb-Bi-S元素组合仅在牛形坝-柳木坑矿床出现。矿床属于Au-Bi-(低Te)-S体系,铋盐矿物形成于中低温、中高密度、低盐度的成矿环境。从岩浆中分馏出来的成矿流体发生减压沸腾迫使大量蒸汽相逸散,硫逸度增加,铋主要以硫络合物形式运移,随着黄铁矿等硫化物沉淀,硫被大量消耗形成金矿物和碲化物(碲银矿)。成矿流体演化过程中由于温度和硫逸度进一步降低导致在成矿后期沉淀出大量铋硫盐矿物。成矿过程中的Bi促进金的迁移富集。铋矿物在两矿床中的赋存特征、化学成分、形成环境以及沉淀机制等表现出差异,说明铋具有成矿选择性,起到对成矿物质示踪的作用。     

The Late Triassic I–Type Granites from the Longmu Co–Shuanghu Suture Zone in the interior of Tibetan Plateau, China: Petrogenesis and Implication for Slab Break–Off

The Jiangaidarina granitic mass(JM) is an important part of the magmatic belt in Longmu CoShuanghu Suture Zone(LSSZ) in the central Tibetan Plateau. An integrated research involving wholerock geochemistry, zircon LA-ICP-MS U-Pb ages and Hf isotopic compositions was carried out to define the timing, genesis and tectonic setting of the JM. Zircon LA-ICP-MS U-Pb ages have been obtained ranging from 210 to 215 Ma, rather than the Early Jurassic as previously thought. Fifteen granite samples contain hornblendes and show a negative correlation between P_2 O_5 and SiO_2, indicating that the JM is an I-type granite. All the granites are enriched in LREE relative to HREE, with negative Eu anomalies(Eu/Eu*=0.56-0.81), and have similar trace elements patterns, with depletion of Ba, Nb, Sr and P. These suggest that the JM was fractionated, and this is also proved by the characteristic of negative correlations between oxide elements(TiO_2, MgO, FeOt, MnO, CaO) and SiO_2. Almost all ε_(Hf)(t) values of the granites are between-10.3 and-5.8, implying that the JM has a crustal source intimately related with the South Qiangtang Block(SQB), except for one(+10.2), showing a minor contribution from mantle source.Moreover, relatively low Na_2 O/K_2 O ratios(0.42-0.93) and high A/CNK values(0.91-1.50) reflect that the JM was predominately derived from the medium-high potassium basaltic crust, interacted with greywacke. Our new geochemical data and geochronological results imply that the Late Triassic magmas were generated in a post-collisional tectonic setting, probably caused by slab break-off of the Longmu Co-Shuanghu Tethyan Ocean(LSTO). This mechanism caused the asthenosphere upwelling, formed extension setting, offered an enormous amount of heat, and provided favorable conditions for emplacement of voluminous felsic magmas. Furthermore, the LSTO could be completely closed during the Middle Triassic, succeed by continental collision and later the slab broke off in the Late Triassic.     

Cosmogenic 26Al/10Be Burial Dating of the Uplift Rate of Southern Qinling Mountains since the Middle Pleistocene

正Objective The Qinling Mountains(QM)in Central China is a natural barrier that corresponds to the boundary between the southern and northern climate and environment(Gong Hujun et al.,2017).Northern QM is relatively steep,and southern QM is in contrast relatively low and gentle.Investigations have shown that the average uplift rate of     

Mixing of Enriched Lithospheric Mantle-Derived and Crustal Magmas: Evidence from the Habo Cenozoic Porphyry in Western Yunnan

New zircon U–Pb ages, whole-rock geochemistry and zircon Hf isotopes from the Habo porphyry Western Yunnan, China, were determined to provide constraints on the timing of uplift of the Eastern Tibetan Plateau. The intrusive rocks consist of shoshonitic porphyry (syenite porphyry and monzonite porphyry). Zircon laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) U–Pb dating indicates coeval emplacement ages of ~35 Ma. The porphyries have alkaline affinities, enrichment in large ion lithophile elements (LILEs) and light rare earth elements (LREEs) (e.g., Rb, Th, U, Pb), with depletion of high field strength elements (HFSEs) (e.g., Nb, Ti, Ta) and weak Eu anomalies. They display uniform Lu–Hf isotopic compositions with negative zircon εHf(t) values ranging from -3.9 to -0.6. The chemical characteristics of the syenite porphyries indicated that they most likely originated from the lower crust, with mantle-derived material involved in their generation. Geochemically, the monzonite porphyries are similar to the syenite porphyries; however, the lower MgO contents suggest that they were produced by different degrees of partial melting of the same lower crust source. Combined with the geochemical and isotopic data in this paper, imply that the alkali-rich porphyries of the Habo polymetallic deposit were derived from the partial melting of lower crust, enriched by mantle magma, formed in a conversion stage from stress extrusion (a strike-slip shear process) to local stress relaxation (a strike-slip pull-apart process) at the Ailaoshao tectonic zone.