Volcanoes of the southwestern extension of the active Mariana island arc: New swath-mapping and geochemical studies

Until recently it was thought that the volcanoes of the Mariana island arc of the western Pacific terminated at Tracey Seamount at ∼ 14°N immediately west of Guam. Sea floor mapping in 1995 shows a series of large volcanic seamounts stretching westward for nearly 300 km beyond that point. The morphology, spacing, and composition of those sampled are consistent with their having formed as a consequence of eruption of suprasubduction zone arc magmas. The relationships of the volcanoes to the tectonic processes of subduction of the Pacific plate beneath the southern portion of the Mariana convergent plate margin are becoming increasingly clear as new bathymetry and geochemical data are amassed. The volcanoes along this trend that lie closest to Guam are forming where the center of active extension in the back-arc basin intersects the line of arc volcanoes. They develop well-defined rifts that are parallel to rift structures along the extension center, whereas volcanoes of the spreading axis to the north are smaller than the frontal arc volcanoes and tend to form along lineaments. Compositions of lavas from these intersection volcanoes bear some similarities to back-arc basin basalt, but are on the whole well within the range of compositions for Mariana island arc lavas. The Pacific plate subducts nearly orthogonal to the strike of the trench along the southern part of the Mariana system and the distance to the arc line from the trench axis is only ∼ 150 km. Several deep fault-controlled canyons on the inner slope of the southern Mariana trench indicate an enhanced tectonic extension of this plate margin. The presence of these active arc volcanoes and the existence of the orthogonal normal faulting along the southern Mariana forearc supports a model of radial extension for formation of the Mariana Trough, a model previously dismissed because of the lack of evidence of these two major geological features.     

De-bugging the 'millipede' porphyroblast microstructure: a serial thin-section study and 3-D computer animation

ABSTRACT Seventy-five spatially orientated, serial thin sections cut from a single rock containing ‘millipede’ porphyroblast microstructure from the Robertson River Metamorphics, Australia, reveal the three-dimensional (3-D) geometry of oppositely concave microfolds (OCMs) that define the microstructure. Electronic animations showing progressive serial sections of the 3-D microstructure are made available via the World Wide Web. The OCM amplitudes decrease regularly from a maximum in near-central sections to a minimum in near-marginal sections, whereas the OCM interlimb angles increase regularly from a minimum in near-central sections to a maximum in near-marginal sections. These observations illustrate that the OCMs are noncylindrical surfaces with culminations located in near-central sections. Because the porphyroblast cores appear to have been present before significant development of the syn-OCM foliation, all of the OCMs were formed by heterogeneous extension around these cores. The overall geometry of the OCMs described here reflects the strain state, and cannot be used to constrain deformation paths.     

The role of deformation partitioning in the deformation and recrystallization of plagioclase and K-feldspar in the Woodroffe Thrust mylonite zone, central Australia

ABSTRACT In the Woodroffe Thrust mylonite zone, central Australia, recrystallization in plagioclase and K-feldspar involved subgrain rotation, assisted by grain-boundary or kink band boundary bulging, without contribution from a change in the chemical composition from host grains to new grains. The size of subgrains and new grains changes across the mylonite zone, apparently as a function of the strain rate and the H2O content of the rock. The partitioning of deformation into zones of progressive shearing and progressive shortening controls the sites of recovery and recrystallization in feldspar during mylonitization. The size of feldspar porphyroclasts in well developed mylonites is governed by the scale of deformation partitioning reached in the earlier stages of mylonitization, before the formation of a large proportion of fine-grained matrix that can accommodate the progressive shearing component of the deformation. Recrystallization occurs in microcline, apparently without involving a translation to a monoclinic structure, as microcline-twinned new grains are common adjacent to microcline-twinned host grains. K-feldspar triclinicity values calculated from XRD traces increase from the margins to the interior of the mylonite zone, in conjunction with deformation intensity. K-feldspar host grains locally have cores of orthoclase or untwinned microcline, surrounded by mantles of twinned microcline, suggesting a relationship between the presence of microcline twinning and the degree of K-feldspar triclinicity.     

Fringing reef growth on a terrigenous mud foundation, Fantome Island, central Great Barrier reef, Australia

The leeward fringing reef at Fantome Island (central Great Barrier Reef province) is a carbonate body which has developed under the influence of terrigenous sedimentation. The reef flat is up to 1000 m wide and is surfaced by mobile sand and gravel, with almost all live corals restricted to the seaward rim. The reef slope has coral columns and heads on the upper part, but below 5 m water depth it is a muddy substrate with scattered mounds of branching corals. Three high recovery cores show the reef is up to 10 m thick and developed over a gently sloping terrace of weathered Pleistocene alluvium. Three post-glacial stratigraphic units are recognised: (1) carbonate reef top unit of coral rudstone and framestone including Sinularia spiculite; (2) lower slope unit of coral floatstone in a terrigenous muddy matrix; and (3) transgressive basal unit of skeletal arkosic sand. The acid insoluble content of matrix and of individual corals increases downwards. Coral growth rates decrease downwards, reflecting slower growth in muddier environments. Radiocarbon dating shows that the reef prograded seaward at almost stable sea level. An average vertical accumulation rate of 6.7 mm yr^-1 is indicated. Two age reversals are interpreted as material transported by storms or by erosion in response to a late Holocene sea-level fall. The carbonate reef top unit has developed adjacent to, and is environmentally compatible with a muddy terrigenous, lower slope unit. Terrigenous influx has not changed during the Holocene, and terrigenous content of sediments is controlled by deposition on the reef slope of fine sediment winnowed from the reef flat and concentration of coarse sediment in the transgressive basal sheet.     

Deglaciation history and landscape development of fjord-valley deposits in Buvika, Mid-Norway

Thick deposits of glaciomarine clay and silt overlain by Holocene marine sediments in Norwegian fjord valleys have been, and still are, subject to erosional processes such as river incision, ravine formation and slide activity. In Buvika, Mid‐Norway, these land‐forming processes have been highly influenced by the valley‐fill stratigraphy. Glaciomarine and marine clay sediments dominate this 8 km long hanging valley south of the Gaulosen fjord, with local occurrences of coarser‐grained sediments. Studies of sediments and structures in road excavations together with ¹⁴C ages indicate at least one, possibly two, minor glacier readvances in late Allerød/early Younger Dryas (YD) time. This implies a more dynamic ice sheet with more minor ice‐front oscillations than earlier documented in this region. Glacioisostatic rebound resulted in groundwater leaching of marine clay and quick‐clay formation in certain layers or zones. The relative sea‐level fall led to incision by rivers accompanied by numerous slides involving quick clay, which completely liquefies when remoulded. To the east, permeInger‐Lise Solberg (e‐mail: inger‐lise.solberg@sintef.no ), Department of Geology and Mineral Resources Engineering, Norwegian University of Science and Technology (NTNU). Present address: SINTEF Building and Infrastructure, Høgskoleringen 7a, NO‐7465 Trondheim, Norway; Kåre Rokoengen, Department of Geology and Mineral Resources Engineering, NTNU, Sem Sælands veg 1, NO‐7491 Trondheim, Norway; Louise Hansen, Lars Olsen and Harald Sveian, Geological Survey of Norway, NO‐7491 Trondheim, Norwayable layers of northwesterly dipping sand and gravel generally originate from a former ice‐marginal delta. These relatively thick and frequent layers of interbedded sand and gravel in the clay‐dominated deposits drain groundwater in the slopes, leading to the development of deeply incised ravines. To the south and north, thinner layers of coarse material in the clay lead to pore‐pressure build‐ups and quick‐clay development, resulting in numerous slide scars. Knowledge of the morphology, stratigraphy and erosion pattern of areas prone to formation of quick clay is important in order to understand the landscape development and evaluate risk areas.     

Coupling of deformation and reactions during mid-crustal shear zone development: an in situ frictional–viscous transition

A well preserved strain and reaction gradient records the progressive transformation of a megacrystic Kfs+Cpx+Opx+Bt₁±Qtz syenitic pluton to a strongly sheared Kfs+Act+Bt₂+Ab+Qtz tectonite within the exhumed Norumbega Fault System, Maine, USA. Detailed microstructural analysis indicates that fracturing and localized fluid infiltration initiated the deconstruction of the existing K-feldspar and two-pyroxene load-bearing framework, and that feedback among metamorphic reactions, fabric development and enhanced permeability during progressive shearing led to the development of an interconnected, biotite- and actinolite-rich foliation. The activation of dislocation creep in biotite and quartz, and dissolution–precipitation creep in actinolite and feldspar, with increasing strain ultimately resulted in a transition from dominantly frictional to dominantly viscous deformation processes. Petrological data show that various scales of geochemical disequilibrium exist across the strain and reaction gradient, and that reaction progress was limited by slow chemical diffusion during the early stages of deformation. Petrological modelling results indicate that the existing plutonic assemblage was metastable at mid-crustal conditions, and that fluid infiltration and deformation allowed the product assemblage to advance towards chemical equilibration. Comparison of the observed microstructures and deformation mechanisms with experimental and numerical modelling results suggest that the development of an interconnected biotite-dominated fabric probably caused a major (up to three fold) reduction in bulk rock strength and localization of strain into the foliated margin.     

Facies characteristics and architecture related to palaeodepth of Holocene fjord–delta sediments

Lithofacies characteristics and depositional geometry of a sandy, prograding delta deposited as part of the Holocene valley‐fill stratigraphy in the Målselv valley, northern Norway, were examined using morpho‐sedimentary mapping, facies analysis of sediments in exposed sections, auger drilling and ground penetrating radar survey. Various lithofacies types record a broad range of depositional processes within an overall coarsening‐upward succession comprising a lowermost prodelta/bottomset unit, an intermediate delta slope/foreset unit containing steeply dipping clinoforms and an uppermost delta plain/topset unit. Bottomset lithofacies typically comprise sand‐silt couplets (tidal rhythmites), bioturbated sands and silts, and flaser and lenticular bedding. These sediments were deposited from suspension fall‐out, partly controlled by tidal currents and fluvial effluent processes. Delta foreset lithofacies comprise massive, inverse graded and normal graded beds deposited by gravity‐driven processes (mainly cohesionless debris flows and turbidity currents) and suspension fall‐out. In places, delta foreset beds show tidal rhythmicity and individual beds can be followed downslope into bottomset beds. Delta plain facies show an upward‐fining succession with trough cross‐beds at the base, followed by planar, laminated and massive beds indicative of a bedload dominated river/distributary system. This study presents a model of deltaic development that can be described with reference to three styles within a continuum related primarily to water depth within a basin of variable geometry: (i) bypass; (ii) shoal‐water; and (iii) deep‐water deltas. Bypass and deep‐water deltas can be considered as end members, whereas shoal‐water deltas are an intermediate type. The bypass delta is characterized by rapid progradation and an absence of delta slope sediments and low basin floor aggradation due to low accommodation space. The shoal‐water delta is characterized by rapid progradation, a short delta slope dominated by gravity‐flow processes and a prodelta area characterized by rapid sea‐floor aggradation due to intense suspension fallout of sandy material. Using tidal rhythmites as time‐markers, a progradation rate of up to 11 m year^?1 has been recorded. The deep‐water delta is characterized by a relatively long delta slope dominated by gravity flows, moderate suspension fall‐out and slow sea‐floor aggradation in the prodelta area.     

Hydrogen concentrations on C‐class asteroids derived from remote sensing

Abstract— We present spectroscopic observations of 16 asteroids from 1.9‐3.6 μm collected from the United Kingdom Infrared Telescope (UKIRT) from 1996–2000. Of these 16 asteroids, 11 show some evidence of a 3 μm hydrated mineral absorption feature greater than 2s? at 2.9 μm. Using relations first recognized for carbonaceous chondrite powders by Miyamoto and Zolensky (1994) and Sato et al. (1997), we have determined the hydrogen to silicon ratio for these asteroids and calculated their equivalent water contents, assuming all the hydrogen was in water. The asteroids split into 2 groups, roughly defined as equivalent water contents greater than ?7% (8 asteroids, all with 3 μm band depths greater than ?20%) and less than ?3% for the remaining 8 asteroids. This latter group includes some asteroids for which a weak but statistically significant 3 μm band of non‐zero depth exists. The G‐class asteroids in the survey have higher water contents, consistent with CM chondrites. This strengthens the connection between CM chondrites and G asteroids that was proposed by Burbine (1998). We find that the 0.7 μm and 3 μm band depths are correlated for the population of target objects.     

How useful are ‘millipede’ and other similar porphyroblast microstructures for determining synmetamorphic deformation histories?

ABSTRACT Oppositely concave microfolds (OCMs) in and adjacent to porphyroblasts can be classified into five nongenetic types. Type 1 OCMs are found in sections through porphyroblasts with spiral-shaped inclusion trails cut parallel to the spiral axes, and commonly show closed foliation loops. Type 2 OCMs, commonly referred to as ‘millipede’ microstructure, are highly symmetrical, the foliation folded into OCMs being approximately perpendicular to the overprinting foliation. Type 3 OCMs are similar to Type 2, but are asymmetrical, the foliation folded into OCMs being variably oblique to the overprinting foliation. Type 4 OCMs are highly asymmetrical, only one foliation is present, and this foliation is parallel to the local shear plane. Type 5 OCMs result from porphyroblast growth over a microfold interference pattern. Types 1 and 2 are commonly interpreted as indicating highly noncoaxial and highly coaxial bulk deformation paths, respectively, during porphyroblast growth. However, theoretically they can form by any deformation path intermediate between bulk coaxial shortening and bulk simple shearing. Given particular initial foliation orientation and timing of porphyroblast growth, Type 3 OCMs can also form during these intermediate deformation paths, and are commonly found in the same rocks as Type 2 OCMs. Type 4 OCMs may indicate highly noncoaxial deformation during porphyroblast growth, but may be difficult to distinguish from Type 3 OCMs. Thus, Types 1–3 (and possibly 4) reflect the finite strain state, giving no information about the rotational component of the deformation(s) responsible for their formation. Furthermore, there is a lack of unequivocal independent evidence for the degree of noncoaxiality of deformation (s) during the growth of porphyroblasts containing OCMs. Type 2 OCMs that occur independently of porphyroblasts or other rigid objects might indicate highly coaxial bulk shortening, but there is a lack of supporting physical or computer modelling. It is possible that microstructures in the matrix around OCMs formed during highly noncoaxial and highly coaxial deformation histories might have specific characteristics that allow them to be distinguished from one another. However, determining degrees of noncoaxiality from rock fabrics is a major, longstanding problem in structural geology.     

LICHENOMETRY ON ADELAIDE ISLAND, ANTARCTIC PENINSULA: SIZE-FREQUENCY STUDIES, GROWTH RATES AND SNOWPATCHES

This paper presents new lichenometric population data from the Antarctic Peninsula (67°S), and describes a new approach to lichen growth-rate calibration in locations where dated surfaces are extremely rare. We use historical aerial photography and field surveys to identify sites of former perennial snowpatches where lichen populations now exist. As an independent check on lichen mortality by snowkill, and the timing of snow patch disappearance, we use a positive-degree day (PDD) approach based on monthly climate data from Rothera Research Station. We find that maximum growth rates for lichens <40 mm in diameter on Adelaide Island are around 0.8 mm/yr. Furthermore, we propose that our combined methodology may be more widely applicable to the Polar Regions where the construction of lichenometric dating (age-size) curves remains a problem.