Lithium is an important geochemical tracer for fluids or solids. However, because the electron microprobe cannot detect Li, variations of Li abundance at the micrometric scale are most often estimated from bulk analyses. In this study, the Li intense emission line at 670.706 nm in optical emission spectroscopy was used to perfect the analysis of Li at the micrometric scale by means of laser-induced breakdown spectroscopy (LIBS). To estimate lithium content for different geological materials, LIBS calibration of the emission line at 670.706 nm was achieved by use of synthetic glasses and natural minerals. The detection limit for this method is ∼5 ppm Li. Three applications to geological materials show the potential of LIBS for lithium determination, namely for Li-bearing minerals, melt inclusions, quartz, and associated fluid inclusions.For spodumene and petalite from granite pegmatite dikes (Portugal), the Li2O concentrations are 7.6 ± 1.6 wt% and 6.3 ± 1.3 wt%, respectively, by use of LIBS. These values agree with ion microprobe analyses, bulk analyses, or both. For eucryptite crystals, the Li concentrations are scattered because grain size is smaller than the LIBS spatial resolution (6 to 8 μm). Lithium concentrations of melt inclusions from the Streltsovka U deposit (Siberia) are in the range of 2 to 6.2 wt% (Li2O) for Li-rich daughter minerals. Lithium estimations on silicate glasses display values between 90 and 400 ppm.Lithium was also analyzed as a trace element in quartz. Transverse profiles were performed in hydrothermal barren quartz veins from the Spanish Central System (Sierra de Guadarrama). The highest Li concentrations (250 to 370 ppm) were found in specific growth bands in conjunction with the observed variation in optical cathodoluminescence intensity. Considering the fluid inclusion analysis, the source of fluid responsible to the Li enrichment in quartz is probably high-salinity fluids derived from sedimentary basins. 相似文献
Most seismic time-lapse studies so far have been of a qualitative nature. Identification of areas with minor or no seismic changes has been used to plan new infill drilling targets. Increased accuracy in seismic acquisition methods, in both conventional streamer surveys and newer methods such as multicomponent sea-bed seismic and permanent sensors, opens possibilities for the next step: quantitative time-lapse analysis. Quantitative methods here mean the estimation of, for instance, a change in fluid saturation from 20% water to 90% water or the estimation of a pore pressure change of 5 MPa. Explicit expressions for the uncertainties associated with estimated changes in, for instance, reservoir pressure and fluid saturation are derived. These formulae can be used to compare relative uncertainties between estimated parameters as well as to identify the critical factors in various estimation techniques. The importance of accurate rock physics input, as well as that of highly repeatable time-lapse seismic data, is emphasized. Furthermore, uncertainty analysis can be used to find optimal weight factors when the same parameter (e.g. saturation change) is estimated by two or three different techniques. 相似文献
A field test and analysis method has been developed to estimate the vertical distribution of hydraulic conductivity in shallow unconsolidated aquifers. The field method uses fluid injection ports and pressure transducers in a hollow auger that measure the hydraulic head outside the auger at several distances from the injection point. A constant injection rate is maintained for a duration time sufficient for the system to become steady state. Exploiting the analogy between electrical resistivity in geophysics and hydraulic flow two methods are used to estimate conductivity with depth: a half-space model based on spherical flow from a point injection at each measurement site, and a one-dimensional inversion of an entire dataset.
The injection methodology, conducted in three separate drilling operations, was investigated for repeatability, reproducibility, linearity, and for different injection sources. Repeatability tests, conducted at 10 levels, demonstrated standard deviations of generally less than 10%. Reproducibility tests conducted in three, closely spaced drilling operations generally showed a standard deviation of less than 20%, which is probably due to lateral variations in hydraulic conductivity. Linearity tests, made to determine dependency on flow rates, showed no indication of a flow rate bias. In order to obtain estimates of the hydraulic conductivity by an independent means, a series of measurements were made by injecting water through screens installed at two separate depths in a monitoring pipe near the measurement site. These estimates differed from the corresponding estimates obtained by injection in the hollow auger by a factor of less than 3.5, which can be attributed to variations in geology and the inaccurate estimates of the distance between the measurement and the injection sites at depth. 相似文献
Helen J Fraser , Martin R S McCoustra and David A Williams present a simple guide to astrochemistry. Molecules play a fundamental role in many regions of our universe. The science where chemistry and astronomy overlap is known as astrochemistry, a branch of astronomy that has risen in importance over recent years. In this article we review the significance of chemistry in several astronomical years. IN this article we review the significance of chemistry in several astronomical environments including the early universe, interstellar clouds, starforming regions and protoplanetary disks. We discuss theoretical models, laboratory experiments and observational data, and present several recent and exciting results that challenge our perception of the "molecular universe". 相似文献
In conventional seismic processing, the classical algorithm of Hubral and Krey is routinely applied to extract an initial macrovelocity model that consists of a stack of homogeneous layers bounded by curved interfaces. Input for the algorithm are identified primary reflections together with normal moveout (NMO) velocities, as derived from a previous velocity analysis conducted on common midpoint (CMP) data. This work presents a modified version of the Hubral and Krey algorithm that is designed to extend the original version in two ways, namely (a) it makes an advantageous use of previously obtained common-reflection-surface (CRS) attributes as its input and (b) it also allows for gradient layer velocities in depth. A new strategy to recover interfaces as optimized cubic splines is also proposed. Some synthetic examples are provided to illustrate and explain the implementation of the method. 相似文献
Sediment transport processes in the Kärkevagge are investigated concerning their spatial and temporal characteristics due to long–term monitoring. Within this study remote sensing techniques and GIS modelling in connection with geomorphic mapping are applied for identification and characterization of geomorphic process units. Relationships between geomorphometric parameters and slope processes like solifluction, talus creep and rockfall have been analysed. Multitemporal Landsat–TM5 scenes are used as source for landcover characteristics (Normalized Difference Vegetation Index) after preprocessing involving orthorectification and topographic normalization in order to remove possible terrain–induced effects. Additionally, a digital elevation model with a resolution of 20 m for the Kärkevagge catchment is developed and parameters like slope gradient, slope aspect and profile curvature are extracted as input for the analysis of the sediment transport system. The combination of landcover information, geomorphometrical and topological features allows the definition of areas for single process activities. They show specific sediment displacement characteristics depending on material conditions, topological and geometrical features. Geomorphic process units, which show a homogenous composition, are extracted from these available layers. 相似文献
In‐stream gravel mining, massive bridge piers, and channelization have all contributed to the geomorphic instability of the Lower Salt River channel in Arizona. Dam closure, changing dam operating rules, and the frequent modification of the channel bed have decreased our ability to predict the Salt River hydrology. Engineering practice has adapted to this situation and to a public that is increasingly intolerant of service disruptions by constructing larger bridges and extending levees. Building these larger structures may be counterproductive; future construction should not constrict the channel and should re‐establish a braided river to decrease the energy available to the system. 相似文献