Analysis of a giant lightning storm on Saturn

On January 23, 2006, the Cassini/RPWS (Radio and Plasma Wave Science) instrument detected a massive outbreak of SEDs (Saturn Electrostatic Discharges). The following SED storm lasted for about one month and consisted of 71 consecutive episodes. It exceeded all other previous SED observations by Cassini as well as by the Voyagers with regard to number and rate of detected events. At the same time astronomers at the Earth as well as Cassini/ISS (Imaging Science Subsystem) detected a distinctive bright atmospheric cloud feature at a latitude of 35° South, strongly confirming the current interpretation of SEDs being the radio signatures of lightning flashes in Saturn's atmosphere. In this paper we will analyze the main physical properties of this SED storm and of a single small SED storm from 2005. The giant SED storm of 2006 had maximum burst rates of 1 SED every 2 s, its episodes lasted for 5.5 h on average, and the episode's periodicity of about 10.66 h exactly matched the period of the ISS observed cloud feature. Using the low frequency cutoff of SED episodes we determined an ionospheric electron density around ¹⁰⁴ cm⁻³ for the dawn side of Saturn.     

Processing and preliminary interpretation of noisy high-resolution seismic reflection/refraction data across the active Ostler Fault zone,South Island,New Zealand

In an attempt to understand the structure of active faults as they emerge from bedrock into shallow semi-consolidated and unconsolidated sediments, we have recorded a comprehensive high-resolution seismic reflection/refraction data set across the Ostler Fault zone on the central South Island of New Zealand. This fault zone, which absorbs 1–2 mm/yr of compression associated with oblique convergence of the Pacific and Australian tectonic plates, consists of a series of surface-rupturing N–S trending, west-dipping reverse faults that offset a thick sequence of Quaternary glacial outwash and late Neogene fluvio-lacustrine sediments of the Mackenzie Basin. Our study focuses on a region of the basin where two non-overlapping fault segments are separated by a transfer zone. Deformation in this area is accommodated by offsets on multiple small faults and by folding in their hanging walls. The seismic data with source and receiver spacing of 6 and 3 m and nominal CMP fold of 60 was acquired along twelve 1.2 km long lines orthogonal to fault strike and an additional 1.6 km long tie-line parallel to fault strike. The combination of active deformation and shallow glacial outwash sediments results in particularly complicated seismic data, such that application of relatively standard processing schemes yields only poor quality images. We have designed a pre- and post-stack reflection/refraction processing scheme that focuses on minimising random and source-generated noise, determining appropriate static corrections and resolving contrasting reflection dips. Application of this processing scheme to the Ostler Fault data provides critical information on fault geometry and offset and on sedimentary structures from the surface to ～ 800 m depth. Our preliminary interpretation of one of the lines includes complex deformation structures with folding and multiple subsidiary fault splays on either side of a ～ 50° west-dipping primary fault plane.     

Quartz Cement in Middle Jurassic Reservoir Sandstones in North Sea. A Review. Part Ⅰ: Occurrence and Character

Quartz cementation is a very important diagenetic event and main porosity-occluding factor in the reservoir sandstones in middle Jurassic i n North Sea. Petrological studies indicate the quartz cementation is limited in shallower burial depth and increases significantly at depth around 3.5 - 4 km. T he amount of quartz cement increases with burial depth from an average of approx imately 4%-5 vol% at 2.5 km to 17%-20 vol% at 4 km. Highest abundances of quartz cement exceeds 28% which has been found in the Ness Formation. Variations in qu artz cementation between different sandstone facies is minimal for any one forma tion, with exception of the generally lower quantities present in the heterolith ic sandstone. Homogenisation temperatures of fluid inclusion in quartz overgrowt h from the North Sea reservoirs indicate that few quartz cement occur below the temperature 70 ℃～80 ℃, the onset of large volume quartz cement starts at the temperatures higher than 90 ℃ which suggests the quartz cementation is temperat ure - dependent during progressing diagenesis of sandstones.     

The variation of cosmogenic Kr and Xe in a core from Estherville mesosiderite: direct evidence that the lunar131Xe anomaly is a depth effect

Kr and Xe were measured by a stepwise heating technique in three samples of a drill core in the “Minnesota” fragment of the Estherville mesosiderite. The cosmogenic⁷⁸Kr/⁸³Kr decreased from the “top” sample to the “bottom” sample(“top” = 0.163 ± 0.005, “bottom” = 0.151 ± 0.005) while the cosmogenic¹³¹Xe/¹²⁶Xe ratio increased(“top” = 5.58 ± 0.35, “bottom” = 6.92 ± 0.17). Cosmic-ray track studies have shown that the “top” sample was indeed closer to the preatmospheric surface than the “bottom” sample by ～ 10 cm. This is the first direct evidence, in a sample of known geometry, that the cosmogenic¹³¹Xe/¹²⁶Xe ratio increases as a function of depth, and as such, confirms the hypothesis that the lunar¹³¹Xe anomaly is a bona fide depth effect due to resonance neutron capture in¹³⁰Ba.     

Dynamic properties of planar,coupled shear walls

The paper is a study of the natural frequencies and mode shapes of planar, coupled shear walls, a common lateral resistive element in building construction. The equations of motion are derived for the general case, and the eigenvalue problem associated with free vibrations of equal, constant shear walls is solved, both with and without the inclusion of the inertia of vertical motion. Explicit solutions are presented for the characteristic equation and the mode shapes and the results are illustrated with figures, including an example calculation based on the shear walls of the Mt. McKinley Building, damaged by the Alaskan earthquake of 1964. The results affirm the necessity of including vertical displacement of the shear walls in the analysis of such systems, and suggest that the inertia of vertical motion also must be considered in the analysis for certain ranges of the parameters.     

The Amoco Cadiz oil spill—At a glance

The tanker Amoco Cadiz grounded close to Aber Wrac'h in Brittany, France, on March 1978. Graphs are presented, showing the fate of the oil, the recovery of the biota and the social impacts after the grounding. Visual insepction in 1983 showed that there are still nuisance amounts of oil, and the biotic recovery is far from being complete with respect to species distribution.     

Snow research in Svalbard–an overview

This paper summarizes the most significant snow-related research that has been conducted in Svalbard. Most of the research has been performed during the 1990s and includes investigations of snow distribution, snow-melt, snow pack characteristics, remote sensing of snow and biological studies where snow conditions play an important role. For example, studies have shown regional trends with about 50% higher amounts of snow accumulation at the east coast of Spitsbergen compared to the west coast. Further, the accumulation rates are about twice as high in the south compared to the north. On average, the increase in accumulation with elevation is 97 mm water equivalents per 100 m increase in elevation. Several researchers reported melt rates, which are primarily driven by incoming short-wave radiation, in the range of 10-20 mm/day during spring. Maximum melt rates close to 70 mm/day have been measured. In addition to presenting an overview of research activities, we discuss new, unpublished results in areas where considerable progress is being made. These are i) modelling of snow distribution, ii) modelling of snowmelt runoff and iii) monitoring of snow coverage by satellite imagery. We also identify some weaknesses in current research activities. They are lacks of i) integration between various studies, ii) comparative studies with other Arctic regions, iii) applying local field studies in models that can be used to study larger areas of Svalbard and, finally, iv) using satellite remote sensing data for operational monitoring purposes.     

Microfabric and rock properties of experimentally compressed silt-clay mixtures

Oedometric mechanical compaction tests were performed on brine-saturated synthetic samples consisting of silt-clay mixtures to study changes in microfabric and rock properties as a function of effective stress. The silt consisted of crushed quartz (∼100%) with grain size range between 4 and 40 μm, whereas the clay consisted of 81% kaolinite, 14% mica/illite and 5% microcline of grain size between 0.4 and 30 μm. Five sample pairs ranging in composition from pure silt to pure clay were compacted to 5 and 50 MPa effective stress respectively. SEM studies were carried out to investigate microfabric changes in the mechanically compacted silt-clay mixtures. The degree of alignment of the different minerals present (quartz, mica/illite and kaolinite) were computed by using an image analysis software. Experimental compaction have measured the changes in the rock properties such as porosity and velocity as a function of effective stress for different mixtures of clay and silt. Clay-rich samples showed a higher degree of mineral orientation and lower porosity compared to silt-dominated samples as a function of effective stress. Pure clay sample had 11% porosity at 50 MPa effective stress whereas the pure silt sample retained about 29% porosity at the same effective stress. The experiments showed that low porosity down to 11% is possible by mechanical compaction only. A systematic increase in strain was observed in the silt-clay mixtures with increasing clay content but the porosity values found for the 50:50 silt-clay mixture were lower than that of 25:75 silt-clay mixture. No preferential mineral orientation is expected before compaction owing to the high initial porosity suggesting that the final fabric is a direct result of the effective stress. Both P- and S-wave velocities increased in all silt-clay mixtures with increasing effective stress. The maximum P- and S-wave velocities were observed in the 25:75 silt-clay mixture whereas the minimum Vp and Vs were recorded in the pure silt mixture. At 50 MPa effective stress P- wave velocities as high as 3 km/s resulted from experimental mechanical compaction alone. The results show that fine-grained sediment porosity and velocity are dependent on microfabric, which in turn is a function of grain size distribution, particle shape, sediment composition and stress. At 5 MPa effective stress, quartz orientation increased as a function of the amount of clay indicating that clay facilitate rotation of angular quartz grains. Adding clay from 25% to 75% in the silt-clay mixtures at 50 MPa effective stress decreased the quartz alignment. The clay mineral orientation increased by increasing both the amount of clay and the effective stress, the mica/illite fabric alignment being systematically higher than that of kaolinite. Even small amount of silt (25%) added to pure clay reduced the degree of clay alignment significantly. This study demonstrates that experimental compaction of well characterized synthetic mudstones can be a useful tool to understand microfabric and rock properties of shallow natural mudstones where mechanical compaction is the dominant process.     

Role of effective permeability distribution in estimating overpressure using basin modelling

Overpressure generation is a function of the rates of sedimentation, compaction, fluid generation from kerogen and dehydration of minerals, and most importantly the lateral distribution of permeability within a basin as this controls lateral drainage. Sedimentary basins, however, are typically highly heterogeneous with respect to primary sedimentary facies, diagenesis and tectonic development. While fluid flow models based on idealised homogeneous basins may further our understanding of the processes that influence overpressure development, the results are very sensitive to the distribution of rock properties, particularly permeability. The absolute permeability of sedimentary rocks varies from more than 1 Darcy to less than 0.01 nanodarcy (nD) (10⁻¹¹ Darcy).