Origin of a unique impact-melt rock—the L-chondrite Ramsdorf

Abstract— We have studied a unique impact-melt rock, the Ramsdorf L chondrite, using optical and scanning microscopy and electron microprobe analysis. Ramsdorf contains not only clast-poor impact melt (Begemann and Wlotzka, 1969) but also a chondritic portion (>60 g) with what appears at low magnification to be a normal, well-defined chondritic texture. However, detailed studies at high magnification show that >90 vol% of the crystals in the chondritic portion were largely melted by the impact: the chondrules lack normal microtextures and are ghosts of the original features. The only relics from the precursor chondrules are olivine crystals, which have the highest melting temperature (～1620 °C). Pyroxene-rich chondrules were so extensively melted that no phenocrysts were preserved and the melt crystallized in situ before significant mixing with exterior olivine-rich melts. Fine-grained pyroxene chondrule ghosts have sharper boundaries with the matrix than porphyritic olivine and pyroxene chondrule ghosts, probably because pyroxene-rich melts are significantly more viscous. Complex textures that formed by injection of melt along cracks and fractures in relic olivines suggest that the chondritic portion of Ramsdorf formed directly from petrologic type 3–4 material by strong shock. We infer that Ramsdorf was largely melted by shock pressures of ～75–90 GPa and that chondrule ghosts and relic olivine phenocrysts were locally preserved by rapid cooling. Quenching was not due to the addition of cold clasts into the melt but to heterogeneous shock heating that only caused internal melting of large olivines and pyroxenes. Ramsdorf appears to be one of the most heavily shocked meteorites that has retained some trace of its original texture.     

The internal structures and densities of asteroids

Abstract— Four asteroidal bodies (the Martian satellites Phobos and Deimos and the main-belt asteroids 243 Ida and 253 Mathilde) have now been the subjects of sufficiently close encounters by spacecraft that the masses and sizes and, hence, the densities of these bodies can be estimated to ～10%. All of these asteroids are significantly less dense than most members of the classes of meteorites identified as being compositionally most nearly similar to them on the basis of spectral characteristics. We show that two processes can act, independently or in concert, during the evolutionary histories of asteroids to produce a low bulk density. One of these processes is the result of one or more impact events and can affect any asteroid type, whereas the other can occur only for certain types of small asteroids that have undergone aqueous alteration.     

Weighted sum method for calculating ground force: an evaluation by using a portable vibrator system

Using a lightweight portable vibrator, we have evaluated the accuracy of the 'weighted sum' method for calculating ground force. Experiments in which the vibrator was suspended elastically have shown that, contrary to expectations based on standard theory, the amplitude of the weighted sum ground force was significantly above zero at high frequencies (> 500 Hz). Complementary investigations with load cells confirmed these results. If not accounted for, these deviations may introduce significant 'vibroseis-correlation noise' in processed records. Furthermore, we have demonstrated that ground force and base-plate velocity can be used to estimate the radiation impedance, which describes the interaction of (vibratory) sources with the ground. Using the mechanical characteristics of the system (i.e. maximum displacement, maximum velocity and maximum acceleration of the base-plate) and the radiation impedance, the behaviour of the portable vibrator on typical Dutch soil types was evaluated. We found that for the same sweep, more high-frequency energy could be generated on hard grounds (e.g. concrete) characterized by a higher radiation impedance than on softer grounds (e.g. clay or sand). Knowledge of this behaviour may provide important information for use in data interpretation.     

Constraints from high-pressure veins in eclogites on the composition of hydrous fluids in subduction zones

Hydrous high-pressure veins formed during dehydration of eclogites in two paleo-subduction zones (Trescolmen locality in the Adula nappe, central Alps and Münchberg Gneiss Massif, Variscan fold belt, Germany) constrain the major and trace element composition of solutes in fluids liberated during dehydration of eclogites. Similar initial isotopic compositions of veins and host eclogites at the time of metamorphism indicate that the fluids were derived predominantly from the host rocks. Quartz, kyanite, paragonite, phengite, zoisite and omphacite are the dominant minerals in the veins. The major element compositions of the veins are in agreement with experimental evidence indicating that the composition of solutes in such fluids is dominated by SiO₂ and Al₂O₃. Relative to N-MORB, the veins show enrichments of Cs, Rb, Ba, Pb, and K, comparable or slightly lower abundances of Sr, U, and Th, and very low abundances of Nd, Sm, Zr, Nb, Ti and Y. The differential fractionation of highly incompatible elements such as K, U and Th in the veins, as well as the presence of hydrous minerals in the eclogites rule out partial melting as a cause for vein formation. These results confirm previous suggestions that fluids derived from subducted basalt may have low abundances of high field strength elements, rare earth elements and Y. Variable vein-eclogite enrichment factors of incompatible alkalis and to a lesser extent Pb appear to reflect mineralogical controls (phengite, epidote-group minerals) on partitioning of these elements during dehydration of eclogite in subduction zones. However, abundance variations of incompatible elements in minerals from eclogites suggest that the composition of fluids released from eclogites at temperatures <700°C may not reflect true equilibrium partitioning during dehydration. Simple models for the trace elements U and Th indicate the relative importance of the basaltic and sedimentary portions of subducted oceanic crust in producing the characteristic chemical signatures of these elements in convergent plate margin volcanism.     

A geo-environmental map for the sustainable development of the Kathmandu Valley, Nepal

An engineering and environmental geological map of the Kathmandu Valley in Nepal has been elaborated within a project of German-Nepalese cooperation. In the Kathmandu Valley, the major geo-environmental problems arise from haphazard exploitation of geologic resources, local landslide zones, severe problems of garbage disposal, river flooding and a dramatic river pollution. The map was prepared by the use of GIS techniques. It contains all basic geological and environmental data, as geotechnical risk zones (landslide-prone areas or those of poor foundation conditions), areas for preferable extraction of construction material and those not to be allowed to be exploited, areas of immediate need of reforestation in order to prevent landslide or badland development, groundwater protection zones, and suitable garbage disposal sites. This revised version was published online in July 2006 with corrections to the Cover Date.     

Characterisation of Fulvic Acids and Glycyrrhizic Acid by Time‐of‐Flight Secondary Ion Mass Spectrometry

Fulvic acids of different origin, spray deposited on polished silicon after dissolution in high‐purity water without any additives, were analysed by time‐of‐flight secondary ion mass spectrometry (TOF‐SIMS) in combination with oblique 24...36 keV SF₅⁺ ion bombardment. The observed, highly reproducible mass spectra cover more than five orders of magnitude in dynamic range, without background subtraction. Apart from lines due to atomic ions and low‐mass ion fragments, the mass spectra exhibit broad maxima between m/z 200...350, mainly due to a beat‐like superposition of lines at every single mass number, up to at least m/z 400. In the negative ion spectra the beats have a spacing of m/z 14, corresponding to a CH₂‐unit. The high‐mass tails of the spectra extend well beyond m/z 5000, with similar slopes in the positive and the negative ion mass spectra. The negative spectra appear to be less affected by fragmentation products than the positive spectra. Fulvic acids (FAs) of different origin show distinctly different spectra, with mean masses ranging between m/z ≈ 450 and 580 (for a low‐mass cut‐off m/z 150). To further verify the ability of TOF‐SIMS to detect molecules and clusters with masses significantly above the maxima of the FA spectra, samples of glycyrrhizic acid (GA, as GA ammonium salt with molecular weight 840) were also analysed. Parent ions as well as multimers (GA)_n were observed as positive and negative ions, up to n = 4 (m/z 3320). The results are compared with spectra recently obtained by other mass spectrometric techniques.     

Estimation of the 3D correlation structure of an alluvial aquifer from surface-based multi-frequency ground-penetrating radar reflection data

Knowledge about the stochastic nature of heterogeneity in subsurface hydraulic properties is critical for aquifer characterization and the corresponding prediction of groundwater flow and contaminant transport. Whereas the vertical correlation structure of the heterogeneity is often well constrained by borehole information, the lateral correlation structure is generally unknown because the spacing between boreholes is too large to allow for its meaningful inference. There is, however, evidence to suggest that information on the lateral correlation structure may be extracted from the correlation statistics of the subsurface reflectivity structure imaged by surface-based ground-penetrating radar measurements. To date, case studies involving this approach have been limited to 2D profiles acquired at a single antenna centre frequency in areas with limited complementary information. As a result, the practical reliability of this methodology has been difficult to assess. Here, we extend previous work to 3D and consider reflection ground-penetrating radar data acquired using two antenna centre frequencies at the extensively explored and well-constrained Boise Hydrogeophysical Research Site. We find that the results obtained using the two ground-penetrating radar frequencies are consistent with each other, as well as with information from a number of other studies at the Boise Hydrogeophysical Research Site. In addition, contrary to previous 2D work, our results indicate that the surface-based reflection ground-penetrating radar data are not only sensitive to the aspect ratio of the underlying heterogeneity, but also, albeit to a lesser extent, to the so-called Hurst number, which is a key parameter characterizing the local variability of the fine-scale structure.     

The Deformational Response of a Viscoelastic Solid Earth Model Coupled to a Thermomechanical Ice Sheet Model

We apply a coupled thermomechanical ice sheet—self-gravitating viscoelastic solid Earth model (SGVEM), allowing for the dynamic exchange of ice thickness and bedrock deformation, in order to investigate the effect of viscoelastic deformation on ice dynamics and vice versa. In a synthetic glaciation scenario, we investigate the interaction between the ice sheet and the solid Earth deformation, the glacial-isostatic adjustment (GIA), accounting for an atmospheric forcing depending on the ice sheet surface altitude. We compare the results from the coupled model to runs with the common elastic lithosphere/relaxing asthenosphere (ELRA) model, where the lithosphere is represented by a thin plate and the mantle relaxes with one characteristic relaxation time, as well as to a rigid Earth without any deformation. We find that the deformational behaviour of the SGVEM on ice dynamics (i.e. stored ice volume, ice thickness and velocity field) is comparable to the ELRA for an optimal choice of the parameters in steady state, but exhibits differences in the transient behaviour. Beyond the ice sheet, in the region of peripheral forebulge, the differences in the transient surface deformation between ELRA and SGVEM are substantial, demonstrating the inadequacy of the ELRA model for interpreting constraints on GIA in the periphery of the ice sheet, such as sea-level indicators and GPS uplift rates.     

Analysis of low-flow characteristics for catchments in Dongjiang Basin, China

Low-flow indices have been determined from long-term daily streamflow data for 13 catchments in Dongjiang Basin in southern China. The Brutsaert-Nieber method was applied to estimate catchment-scale effective groundwater parameters; representative values were 4.5?×?10^?4 m² s^?1 for the hydraulic diffusivity; 3.19?×?10^?5 m² s^?1/2 for the hydraulic desorptivity; 2.27?×?10^?4 m s^?1 for the hydraulic conductivity; and 0.2617 for the drainable porosity. The response constants correlate well with the total stream length and catchment area. Solutions of the linearised Boussinesq equation were used to guide the development of regional multivariate regression models for estimating low-flow indices from the catchment-scale effective parameters. Results showed that these catchments exhibit similar low-flow characteristics. The 7-day lowest average streamflows with return periods of 10 and 2 years (7Q10 and 7Q2) are highly correlated with the catchment-scale response constants. The low-flow ratio Q95/Q50 (ratio of daily streamflow exceeded 95 and 50% of the time, respectively) varied between 0.3 and 0.5, indicating a high proportion of groundwater in the streamflow. The advantage of the regional regression model is its conceptual basis and use of the catchment-scale effective parameters. The method has the potential to be applied to ungauged catchments for estimating low-flow statistics from stream length and catchment area.     

Comparison of an Electrochemical and Luminescence‐Based Oxygen Measuring System for Use in the Biodegradability Testing According to Closed Bottle Test (OECD 301D)

The effects of persistent organic pollutants on the aquatic environment still can hardly be assessed. Therefore, ready biodegradability is a desired key characteristic of chemicals. Accordingly, biodegradation testing is of utmost importance and is a vital part within the risk assessment for organic chemicals. In the closed bottle test (CBT; OECD 301D) the degree of biological degradation of a chemical is assessed by monitoring the oxygen consumption so far with a Clark electrode as standard method. However, this method is time‐consuming, laborious and led to frequent fluctuations of the test results, which limited their validity. Due to these shortcomings, an optical system that enables contact‐free measuring of the oxygen concentration in a closed bottle, based on dynamic luminescence quenching, was examined. The test results were compared to those obtained with the “classical” electrochemical technique (Clark electrode). At first, a basic standard for the handling of the new instrument in the laboratory was developed. Then possible influencing factors, reliability, comparability, and reproducibility of the test results were investigated by running the CBTs in parallel with the electrode and optode method. The findings proved the new optode method to be unambiguously superior to the electrode technique. The frequency of fluctuations of the test results and time and effort necessary for the test run could considerably be reduced. The degradation kinetics of the test substances could be followed easily in the CBT by increasing the measuring points without much additional effort.