Geophysical evidence of the Eastern Marginal Fault of the Cheb Basin (Czech Republic)

The western part of the Bohemian Massif hosts an intersection of two regional fault zones, the SW-NE trending Oh?e/Eger Graben and the NNW-SSE trending Mariánské Lázně Fault, which has been reactivated several times in the geological history and controlled the formation of the Tertiary Cheb Basin. The broader area of the Cheb Basin is also related to permanent seismic activity of M_L 3+ earthquake swarms. The Eastern Marginal Fault of the Cheb Basin (northern segment of the Mariánské Lázně Fault) separates the basin sediments and underlying granites in the SW from the Kru?né Hory/Erzgebirge Mts. crystalline unit in the NE. We describe a detailed geophysical survey targeted to locating the Eastern Marginal Fault and determining its geometry in the depth. The survey was conducted at the Kopanina site near the Nový Kostel focal zone, which shows the strongest seismic activity of the whole Western Bohemia earthquake swarm region. Complex geophysical survey included gravimetry, electrical resistivity tomography, audiomagnetotellurics and seismic refraction. We found that the rocks within the Eastern Marginal Fault show low resistivity, low seismic velocity and density, which indicates their deep fracturing, weathering and higher water content. The dip of the fault in shallow depths is about 60° towards SW. At greater depths, the slope turns to subvertical with dip angle of about 80°. Results of geoelectrical methods show blocky fabric of the Cheb Basin and deep weathering of the granite bedrock, which is consistent with geologic models based on borehole surveys.     

The ROSAT Bright Survey: I. Identification of an AGN sample with hard ROSAT X-ray spectra

The ROSAT Bright Survey (RBS) aims to completely optically identify the more than 2000 brightest sources detected in the ROSAT all-sky survey at galactic latitudes |b| > 30° (excluding LMC, SMC, Virgo cluster). This paper presents a subsample of 66 bright point-like ROSAT survey sources with almost hard PSPC spectra, the hardness ratio HR1 is > 0.5 for most of the sources. Teh subsample could be nearly completely identified by low-resolution optical spectroscopy with the following breakdown into object classes: 31 Seyfert galaxies, 22 BL Lac candidates, 5 clusters of galaxies, 1 cataclysmic variable, and 5 bright stars. Only one object remained unidentified and one X-ray source was a spurious detection. The redshift distrbution peaks around 0.06 for the Seyferts and around 0.13 for the BL Lac candidates. Observations with medium spectral resolution were obtained for most of the new Seyfert galaxies. A large fraction (20 objects) are type 1 Seyfert galaxies, the other fraction includes Seyfert galaxies of type 1.5 – 1.8 (5 objects), two LINERs, and 4 possible narrow-line Seyfert 1 galaxies (NLS1). About one third of the new Seyfert's have nearby companion galaxies displaying either emission or absorption lines at the same redshift. Among them are a couple of systems showing direct morphological evidence for interaction. The large fraction of interacting galaxies among our sample suggests a scenario where interaction is the main trigger of AGN activity.     

Traveling wavefront ray tracing and its applications

The current discussion of whether marine geodesy is something entirely new or part of oceanography or geodesy can be clarified by re‐examining our notions about the basic business of geodesy. This paper contends that the same basic geodetic services, which were needed for millenia to chart and control new territory, are being adapted now to the marine environment to suit modern accuracy standards. In a brief historical review it is shown that conceptually, the oceanic regions were always an integral part of geodetic concern. The oceans were certainly part of the world for the ancient map makers and for Pythagoras’ spherical earth model. Notions connected with the marine geoid were implied in ancient speculations. Distances and directions at sea, even depths, were determined to meet the requirements of the times. With the modern sophistication in geodetic theory and measuring techniques, these ideas became more refined and demanding in turn, but they were there all the time. For obvious reasons, land geodesy developed faster; marine geodesy will catch up now, because only now there is the technical capability and also an urgent economic motivation.     

Biodiversity in Hudson River shore zones: influence of shoreline type and physical structure

The shore zones of the Hudson River, like those of many developed waterways, are highly varied, containing a mix of seminatural and highly engineered shores. Our goal was to document the biodiversity supported by different kinds of shore zones in the Hudson. We chose six common types of shore zones, three of them ??natural?? (sand, unconsolidated rock, and bedrock), and three of them engineered (riprap, cribbing, and bulkheads). We measured selected physical characteristics (shore zone width, exposure, substrate roughness and grain size, shoreline complexity) of three examples of each of these shore types, and also sampled communities of terrestrial plants, fishes, and aquatic and terrestrial invertebrates. Community composition of most taxa differed across shore types, and frequently differed between wide, sheltered shores and narrow, exposed shores. Alien plant species were especially well represented along engineered shores. Nevertheless, a great deal of variation in biological communities was not explained by our six-class categorization of shore zones or the physical variables that we measured. No single shore type supported the highest values of all kinds of biodiversity, but engineered shore zones (especially cribbing and bulkheads) tended to have less desirable biodiversity characteristics than ??natural?? shore zones.     

Wireless technologies for the monitoring of strategic civil infrastructures: an ambient vibration test on the Fatih Sultan Mehmet Suspension Bridge in Istanbul, Turkey

Rapid improvements in telemetry technology and the general decrease in communication costs have raised a growing interest in low-cost wireless sensing units. This is especially the case for structural monitoring purposes, where they are becoming a more valuable alternative to conventional wired monitoring system. The main advantages associated with the use of wireless sensing unit include a considerable decrease in installation costs, decentralization of data analysis, and the possibility of broadening the functional capabilities by exploiting the use, at the same time and place, of different sensors. In this work, the design of a low-cost wireless sensing unit able both to collect, analyze, store, and communicate data and estimated parameters is presented. The suitability of a network of these low-cost wireless instruments for monitoring the vibration characteristics and dynamic properties of strategic civil infrastructures is validated during a ambient vibration recording field test on the Fatih Sultan Mehmet Bridge in Istanbul, Turkey.     

Colluvial and alluvial sediment archives temporally resolved by OSL dating: Implications for reconstructing soil erosion

Colluvial and alluvial sediments represent important geoarchives to reconstruct long-term soil erosion and to gain insight into the complex system of sediment cascades and sediment fluxes within a catchment. In this respect, the temporal information of sediment archive formation is essential and achievable through optical stimulated luminescence (OSL) dating. In this study, colluvial and alluvial sediments from a mesoscale catchment in northern Bavaria were investigated and dated by OSL. Insufficient sediment bleaching was detected for some of the samples. In these cases, the method proposed by Fuchs and Lang [Fuchs, M., Lang, A., 2001. OSL dating of coarse-grain fluvial quartz using single-aliquot protocols on sediments from NE Peloponnese, Greece. Quaternary Science Reviews 20, 783–787.] was applied for equivalent dose (D_e) determination. The calculated OSL ages are in stratigraphic order and their accuracy is confirmed by ¹⁴C age control. Based on the chronostratigraphies for alluvial and colluvial archives, there is a dominant synchronous sedimentation history for the Medieval and Modern period, but initiation of Holocene sedimentation occurred at different times in the upper and lower parts of the catchment. The latter phenomenon might be explained by the decoupled sediment fluxes between both the slope–channel system and the upper and lower catchment.     

A GIS-Based Tool for Representing Larval Dispersal for Marine Reserve Selection

Increasing efforts to implement marine protected areas (MPAs) as a means of managing marine ecosystems have created a need for evaluating potential spatial management plans. Almost all marine populations are metapopulations, connected reproductively by the dispersal of pelagic larvae. Models of marine population dynamics must account for larval connectivity, but despite recent advances connectivity patterns are still poorly understood. To allow more informed decision making when complete information on dispersal is lacking, we have developed a method based on geographic information systems (GIS) for representing larval dispersal distributions based on bathymetry and typical flows in the coastal ocean. These distributions reflect (1) generally greater flow in directions along, rather than across, lines of constant bathymetry and (2) lesser flow in shallow near-shore waters. We demonstrate how to parameterize this two-dimensional method for depicting larval dispersal based on comparisons to local oceanographic data. We then compare the predictions of the two-dimensional method to those of a simpler one-dimensional alternative in a population model used to evaluate proposed MPAs along the coast of central California. The method produces reasonable larval dispersal patterns and appears to include the effects of bathymetry on population dynamics better than commonly used one-dimensional methods and without requiring the significantly greater investment of developing particle-tracking circulation models. An important advantage of a two-dimensional approach is more realistic portrayal of the dependence of population persistence on the cross-shelf dimension of available habitat.     

It starts at home? Climate policies targeting household consumption and behavioral decisions are key to low-carbon futures

Through their consumption behavior, households are responsible for 72% of global greenhouse gas emissions. Thus, they are key actors in reaching the 1.5 °C goal under the Paris Agreement. However, the possible contribution and position of households in climate policies is neither well understood, nor do households receive sufficiently high priority in current climate policy strategies. This paper investigates how behavioral change can achieve a substantial reduction in greenhouse gas emissions in European high-income countries. It uses theoretical thinking and some core results from the HOPE research project, which investigated household preferences for reducing emissions in four European cities in France, Germany, Norway and Sweden. The paper makes five major points: First, car and plane mobility, meat and dairy consumption, as well as heating are the most dominant components of household footprints. Second, household living situations (demographics, size of home) greatly influence the household potential to reduce their footprint, even more than country or city location. Third, household decisions can be sequential and temporally dynamic, shifting through different phases such as childhood, adulthood, and illness. Fourth, short term voluntary efforts will not be sufficient by themselves to reach the drastic reductions needed to achieve the 1.5 °C goal; instead, households need a regulatory framework supporting their behavioral changes. Fifth, there is a mismatch between the roles and responsibilities conveyed by current climate policies and household perceptions of responsibility. We then conclude with further recommendations for research and policy.     

Experimental Na/K exchange between alkali feldspar and an NaCl–KCl salt melt: chemically induced fracturing and element partitioning

The exchange of Na⁺ and K⁺ between alkali feldspar and a NaCl–KCl salt melt has been investigated experimentally. Run conditions were at ambient pressure and 850 °C as well as 1,000 °C. Cation exchange occurred by interdiffusion of Na⁺ and K⁺ on the feldspar sub-lattice, while the Si–Al framework remained unaffected. Due to the compositional dependence of the lattice parameters compositional heterogeneities resulting from Na⁺/K⁺ interdiffusion induced coherency stress and associated fracturing. Depending on the sense of chemical shift, different crack patterns developed. For the geometrically most regular case that developed when potassic alkali feldspar was shifted toward more sodium-rich compositions, a prominent set of cracks corresponding to tension cracks opened perpendicular to the direction of maximum tensile stress and did not follow any of the feldspar cleavage planes. The critical stress needed to initiate fracturing in a general direction of the feldspar lattice was estimated at ≤0.35 GPa. Fracturing provided fast pathways for penetration of salt melt or vapor into grain interiors enhancing overall cation exchange. The Na/K partitioning between feldspar and the salt melt attained equilibrium values in the exchanged portions of the grains allowing for extraction of the alkali feldspar mixing properties.