On the morphological characteristics of overdeepenings in high‐mountain glacier beds

Overdeepenings, i.e. closed topographic depressions with adverse slopes in the direction of flow, are characteristic for glacier beds and glacially sculpted landscapes. Quantitative information about their morphological characteristics, however, has so far hardly been available. The present study provides such information by combining the analysis of (a) numerous bed overdeepenings below still existing glaciers of the Swiss Alps and the Himalaya‐Karakoram region modelled with a robust shear stress approximation and (b) detailed bathymetries from recently exposed lakes in the Peruvian Andes. The investigated overdeepenings exist where glacier surface slopes are low (< 5°–10°), occur in bedrock or morainic material and are most commonly a fraction of a kilometre squared in surface area, hundreds of metres long, about half the length in width and tens of metres deep. They form under conditions of low to high basal shear stresses, at cirque, confluence, trunk valley and terminus positions. The most striking phenomenon, however, is the high variability of their geometries: Depths, surface areas, lengths and widths of the overdeepenings vary over orders of magnitude and are only weakly – if at all – interrelated. Inclinations of adverse slopes do not differ significantly from those of forward slopes and are in many cases higher than so far assumed theoretical limits for supercooling of ascending water and corresponding closure of sub‐glacial channels. Such steep adverse slopes are a robust observation and in support of recently developed new concepts concerning the question about where supercooling of sub‐glacial water and closure of ice channels can or must occur. However, the question of when and under what climatic, topographic and ice conditions the overdeepenings had formed remains unanswered. This open question constitutes a key problem concerning the interpretation of observed overdeepenings, the understanding of the involved glacio‐hydraulic processes and the possibility of realistic predictive modelling of overdeepening formation. Copyright © 2016 John Wiley & Sons, Ltd.     

Change-points in climate extremes in the Zhujiang River Basin, South China, 1961–2007

In this paper, change-points in time series of annual extremes in temperature and precipitation in the Zhujiang River Basin are analyzed with the CUSUM test. The data cover the period 1961–2007 for 192 meteorological stations. Annual indicators are analyzed: mean temperature, maximum temperature, warm days, total precipitation, 5-day maximum precipitation, and dry days. Significant change-points (1986/87, 1997/98, 1968/69, and 2003/04) are detected in the time series of most of the indicators. The change-point in 1986/87 is investigated in more detail. Most stations with this change-point in temperature indicators are located in the eastern and coastal areas of the basin. Stations with this change-point in dry days are located in the western area. The means and trends of the temperature indicators increase in the entire basin after 1986/87. The highest magnitudes can be found at the coast and delta. Decreasing (increasing) tendencies in total and 5-day maximum precipitation (dry days) are mostly observed in the western and central regions. The detected change-points can be explained by changes in the indices of the Western Pacific subtropical high and the East Asian summer monsoon as well as by change-points in wind directions. In years when the indices simultaneously increase and decrease (indices taking reverse directions to negative and positive) higher annual temperatures and lower annual precipitation occur in the Zhujiang River Basin. The high station density and data quality are very useful for spatially assessing change-points of climatic extreme events. The relation of the change points to large-scale oscillation can provide valuable data for planning adaptation measures against climate risks, e.g. for flood control, disaster preparedness, and water resource management.     

Mineralogical and geochemical alteration of low-grade metamorphic black slates due to oxidative weathering

Low-grade metamorphic black slates of Silurian and Lower Devonian ages (from the Thüringisches Schiefergebirge in Germany) were investigated to identify mineralogical and geochemical alterations that occur during the oxidative weathering black slates.The slates exhibit an intense total organic carbon decrease (>90 wt%) due to oxidative weathering. The organic matter in black slate consists mainly of non-pyrolysable material with only minor portions of pyrolysable material. In contrast to the non-pyrolysable organic matter, the concentration of pyrolysable organic matter is not decreased during weathering. Heating experiments have yielded information about a potential protection of pyrolysable organic matter against weathering, which is probably caused by a structural configuration or the intergrowth of organic matter and illite.The slates consist mainly of illite. Iron oxide (goethite) and phosphate encrustations were formed on slate surfaces as a result of oxidative and acid weathering of both iron sulfide and monazite. Kaolinite often occurs as an older encrustation beneath the iron oxide encrustations. Encrustations of iron oxide and phosphate are major sinks for trace elements, released during oxidative weathering.     

Modeling of unsaturated granular flows by a two-layer approach

Flows of partially saturated grain-fluid mixtures over complex curved topography are commonly observed in nature. However, comprehensive understanding of the physics behind them is to date out of reach. To investigate their dynamic process, a two-layer approach is proposed, in which the fluid-saturated granular layer is overlaid by the pure granular material. More specifically, the lower layer is described by a two-phase mixture theory of density preserving solid and fluid constituents. For the upper layer, the single-phase granular mass is treated as a frictional Coulomb-like continuum, and the dilation effect and the influence of the interstitial air are ignored. The capillarity effects and grains-size segregation are not considered in both the layers. The lower and upper layers interact at an interface which is a material surface for the fluid phase, but across which the mass exchange for the granular phase may take place. The granular mass exchange across the layer interface is parameterized by an entrainment type postulate. In addition, the classical jump conditions are employed to connect both layers at the interface dynamically. Furthermore, we perform the depth-averaged technique for the saturated grain-fluid mixture lower layer and the pure granular upper layer, respectively, to simplify the governing equations established. It is demonstrated that the resulting model equations can be reduced to most of the existing single-layer pure granular flow models and saturated two-phase single-layer debris flow models. Numerical solutions demonstrate that the present two-layer model can describe flows of partially saturated grain-fluid mixtures and the transition process of a saturated grain-fluid mixture into an under-saturated state.     

A mesocosm experiment investigating the effects of substratum quality and wave exposure on the survival of fish eggs

In a mesocosm experiment, the attachment of bream (Abramis brama) eggs to spawning substrata with and without periphytic biofilm coverage and their subsequent survival with and without low-intensity wave exposure were investigated. Egg attachment was reduced by 73% on spawning substrata with a natural periphytic biofilm, compared to clean substrata. Overall, this initial difference in egg numbers persisted until hatching. The difference in egg numbers was even increased in the wave treatment, while it was reduced in the no-wave control treatment. Exposure to a low-intensity wave regime affected egg development between the two biofilm treatments differently. Waves enhanced egg survival on substrata without a biofilm but reduced the survival of eggs on substrata with biofilm coverage. In the treatment combining biofilm-covered substrata and waves, no attached eggs survived until hatching. In all treatments, more than 75% of the eggs became detached from the spawning substrata during the egg incubation period, and <1% of these detached eggs survived within the substratum interstices. Hence, detached eggs contributed little to the reproductive success we observed. The implications of these results on the spawning success of fish species that use freshly inundated spawning substrata in shallow waters are discussed.     

Validation of temperature measurements from MIPAS-ENVISAT with balloon observations obtained by MIPAS-B

The Michelson Interferometer for Passive Atmospheric Sounding (MIPAS), a limb sounding Fourier transform interferometer in the mid-infrared band, on board the polar-orbiting ENVIronmental SATellite (ENVISAT) was launched in March 2002 by the European Space Agency (ESA). For the MIPAS data validation, three balloon flights with MIPAS-B, a balloon version of MIPAS, were carried out on the 24th and 25th of September 2002 from Aire sur l’Adour (France 44°N, 0°E), on the 20th and 21th of March, and on the 2nd and 3rd of July 2003 from Esrange, Kiruna (Sweden 68°N, 21°E). The MIPAS operational data version 4.61 for the temperature vertical profiles were compared with the correlative MIPAS-B measurements via the coincident comparison and the trajectory comparison approaches, respectively. The precision of the MIPAS temperature was estimated to be 1.04–2.48 K in the region 123–8 hPa (15–33 km) and beyond the expectation. The systematic difference shows that the absolute accuracy of the MIPAS temperature is within the total combined errors between 356 and 3 hPa (8–39 km). The agreements in the middle stratosphere are better than in the lower stratosphere and upper troposphere. The maximum difference of 1.9 K (0.9%) was found at 228 hPa (11 km). The biases of MIPAS measurements are ?0.39 K (?0.19%) and +0.25 K (+0.12%) (“+” positive bias, “?” negative bias) corresponding to the altitude regions 143–31 hPa (14–24 km) and 31–5 hPa (24–37 km), respectively.     

Fumarole compositions and mercury emissions from the Tatun Volcanic Field,Taiwan: Results from multi-component gas analyser,portable mercury spectrometer and direct sampling techniques

Gas emissions from Tatun volcanic group, northern Taiwan, were studied for the first time using a multi-component gas analyser system (Multi-GAS) in combination with Giggenbach flask methods at fumaroles and mud pools at Da-you-keng (DYK) and Geng-tze-ping (GZP). CO₂/S molar ratios observed at DYK ranged from 3–17, similar ratios were observed using a Multi-GAS sensor box of 8–16. SO₂ at GZP was low, higher concentrations were observed at DYK where SO₂/H₂S ratios were close to 1 for both methods. A lower CO₂/H₂S ratio was measured via Giggenbach flask sampling (7.2) than was found in the plume using the gas sensor at GZP (9.2). This may reflect rapid oxidation of H₂S as it mixes with background air. Gaseous elemental mercury (GEM) levels were observed in the fumarole gases using a portable mercury spectrometer. These are the first such measurements of mercury at Tatun. Mean GEM concentrations in the fumarole plumes were ∼ 20 ng m^− 3, with much higher concentrations observed close to the ground (mean [GEM] 130 and 290 ng m^− 3 at DYK and GZP, respectively). The GEM in the fumarole plume was elevated above concentrations in industrial/urban air in northern Taiwan and the increase in GEM observed when the instrument was lowered suggests high levels of mercury are present in the surrounding ground surface. The GEM/CO₂ (10^− 8) and GEM/S (10^− 6) ratios observed in the fumarole gases were comparable to those observed at other low-temperature fumaroles. Combining the Hg/CO₂ ratio with a previous CO₂ flux value for the area, the annual GEM flux from the Tatun field is estimated as 5–50 kg/year.     

卡斯特地区的公路设计

１场地考察第一步是利用现有岩土工程资料,如州和政府的资料、航空照片、卫星图像和设计单位的数据库。这些对考察卡斯特地区有用的资料包括：（１）详细地图（这些地图不全发表）,一些州的调查实际上包含有碳酸盐岩石详细地图,从中可了解到已知的或可疑落水洞地区。（...     

The global oscillation network group site survey

The Global Oscillation Network Group (GONG) Project is planning to place a set of instruments around the world to observe solar oscillations as continuously as possible for at last three years. The Project has now chosen the sites that will comprise the network. This paper describes the methods of data collection and analysis that were used to make this decision.Solar irradiance data were collected with a one-minute cadence at fifteen sites around the world and analyzed to produce statistics of cloud cover, atmospheric extinction, and transparency power spectra at the individual sites. Nearly 200 reasonable six-site networks were assembled from the individual stations, and a set of statistical measures of the performance of the networks was analyzed using a principal component analysis. An accompanying paper presents the results of the survey.