Composition of the phytoplankton pigments in the surface waters along a transect from the Northwestern to the southeastern Pacific Ocean

Multidisciplinary oceanic investigation was undertaken in Aug–Sep. 2003 along a transect from Northwestern (Busan, Korea) to Southeastern Pacific (Talcahuano, Chile) to understand the physical, chemical and biological features in the surface water, and to depict their interaction with the atmosphere. Among the twenty parameters measured, we describe the physical, chemical and biological features. Physico-chemical data were analyzed in conjunction with the geographic position and yielded 7 peculiar surface water masses. The first water mass (28.4°N, 130.8°E to 21.5°N, 139.5°E) was warm and low in phosphate and nitrate content, and high in silicate. The concentration of phytoplankton pigment was one of the lowest. The second (20.4°N, 140.7°E to 2.2°S, 162.9°E) was the warmest and the least saline. Nitrate and phosphate concentration were one of the lowest. Chlorophyll a (Chl a) concentration was the lowest among the surface waters. The third (3.4°S, 164.0°E to 14.5°S, 173.3°E) was warm. Nitrate concentration was the lowest. CHL-a, peridinin (Perid), violaxanthin (Viola), zeaxanthin (Zea), chlorophyll-b (Chl b) and β-CAR were abundant. The fourth (18.6°S, 177.5°E to 31.8°S, 123.9°W) was saline and poor in nutrient concentration. The contributions of 19′-butanoyloxyfucoxanthin (But-fuco), 19′-hexanoyloxyfucoxanthin (Hex-fuco), and CHL b to CHL a were non-negligible. The fifth (32.4°S, 122.1°W to 33.8°S, 117.2°W) was relatively cold and well oxygenated. Concentration of Fuco, But-fuco, Hex-fuco and Chl b was high. The sixth (34.2°S, 115.4°W to 37.4°S, 92.1°W) was cold, well oxygenated and enriched with phosphate and nitrate. Concentration of phytoplankton pigment was, however, one of the lowest. The seventh, located off the Chilean coast, from 37.2°S, 87.2°W to 36.1°S, 74.1°W was well oxygenated and highly enriched with nitrate and phosphate. Phytoplankton pigments such as Fuco, Perid, But-fico, and Hex-fuco were rich. The 7 surface water masses are partially attributed to Kuroshio Current, North Equatorial Current and North Equatorial Countercurrent, South Equatorial current, South Pacific Subtropical Gyre, South Pacific Current, Subtropical Front and Chilean coastal water. The differences in physicochemical characteristics and the history of the surface water resulted in difference in quantity and composition of the phytoplankton pigment.     

The Vema Transverse Ridge (Central Atlantic)

Transverse ridges are elongate reliefs running parallel and adjacent to transform/fracture zones offsetting mid-ocean ridges. A major transverse ridge runs adjacent to the Vema transform (Central Atlantic), that offsets the Mid-Atlantic Ridge by 320 km. Multibeam morphobathymetric coverage of the entire Vema Transverse ridge shows it is an elongated (300 km), narrow (<30 km at the base) relief that constitutes a topographic anomaly rising up to 4 km above the predicted thermal contraction level. Morphology and lithology suggest that the Vema Transverse ridge is an uplifted sliver of oceanic lithosphere. Topographic and lithological asymmetry indicate that the transverse ridge was formed by flexure of a lithospheric sliver, uncoupled on its northern side by the transform fault. The transverse ridge can be subdivided in segments bound by topographic discontinuities that are probably fault-controlled, suggesting some differential uplift and/or tilting of the different segments. Two of the segments are capped by shallow water carbonate platforms, that formed about 3–4 m.y. ago, at which time the crust of the transverse ridge was close to sea level. Sampling by submersible and dredging indicates that a relatively undisturbed section of oceanic lithosphere is exposed on the northern slope of the transverse ridge. Preliminary studies of mantle-derived ultramafic rocks from this section suggest temporal variations in mantle composition. An inactive fracture zone scarp (Lema fracture zone) was mapped south of the Vema Transverse ridge. Based on morphology, a fossil RTI was identified about 80 km west of the presently active RTI, suggesting that a ridge jump might have occurred about 2.2 m.a. Most probable causes for the formation of the Vema Transverse ridge are vertical motions of lithospheric slivers due to small changes in the direction of spreading of the plates bordering the Vema Fracture Zone.     

Near-surface seismic facies at the Korea Strait shelf margin and trough region

High-resolution seismic profiles across the shelf margin and trough region of the Korea Strait reveal five shallow, near-surface facies units. These are relict coastal deposits, relict delta deposits, slumps and slides, and trough lag deposits. Most deposits represent a lowstand systems tract, formed during the last lowstand of sea level. Relict coastal deposits represent a linear sediment body along the present shelf margin at water depths of 120–150 m, whereas relict delta deposits occur on the gentle, southwestern slope of the trough at water depths of about 150–200 m. Slumps and slides are dominant at the base of slope in the central trough region. Sediments on the central trough floor were partly eroded and redistributed by strong currents, resulting in lag deposits.     

Probabilistic corrosion rate estimation model for longitudinal strength members of bulk carriers

Many bulk carrier losses have been reported of late, and one of the possible causes of such casualties is thought to be the structural failure of aging hulls in rough weather. Clearly, in such cases, vessels that start out being adequate somehow become marginal later in life. Fatigue and corrosion-related potential problems may be the most important factors affecting such age related vessel damage. With respect to fatigue, extensive studies have been done worldwide both experimentally and theoretically, and the results have been applied to some extent. However, in the case of corrosion effects, additional research is still needed to better understand, clarify and address the various strength uncertainties and their effects on structural behaviour. This paper develops a probabilistic corrosion rate estimation model for the longitudinal strength members of bulk carriers. The model is based on available statistical data for corrosion of existing bulk carriers. The corrosion data collected are documented for future use.     

A study of coral reef resilience and implications of adaptive management and rehabilitation in Khanh Hoa Province, Vietnam

The Province of Khanh Hoa, Vietnam, is located in the western South China Sea and boasts a shoreline of 385 km and many islands. Previous studies have indicated the extreme diversity and abundance of coral reefs in its waters as compared with other coastal provinces of Vietnam. A study on the resilience of coral reefs against increased surface water temperature and anthropogenic impact is conducted at 19 reef sites in 2015. At each site, a series of parameters (e.g., coral covers, genus diversity, and coral recruitment, substratum heterogeneity, depth, water exchange level, and sediment deposit and water temperature) are measured quantitatively or semi-quantitatively. The measured data are rated based on the relationship between the parameter values and coral susceptibility; the consideration that reef health reflects the biological capability to adapt to environmental changes and the recruitment potential if bleached; and positive or negative influences of physical factors in the mitigation of thermal stress and protecting corals from bleaching. A cumulative analysis enables researchers to divide the studied reefs into four categories based on varying levels of reef health to support resilience, recovery, and vulnerability in the case of increased water temperature. Relevant management interventions for each category and other supporting activities are suggested to enhance management effectiveness and to plan the rehabilitation of coral reefs for biodiversity conservation and touristic development, taking into account the involvement of related stakeholders.     

On the use of poorly soluble hygroscopic substances for modification of warm clouds and fogs

From analysis of the relationships between the equilibrium state of condensation nuclei and the relative humidity, a conclusion is made concerning the preferred use of poorly soluble substances for the generation of artificial condensation nuclei (ACN) designed for modification of warm clouds and fogs with the purpose of their dissipation and precipitation formation. The advantage of poorly soluble substances over commonly used soluble salts is that the finely dispersed part of the spectrum of the poorly soluble ACN does not deliquesce and so is not involved in the formation of cloud droplets. For experimental testing of the conclusions, preference was given to cement, whose main soluble substance is calcium oxide with a solubility of about 1 g/l. The spectrum of dispersed cement particles was measured and compared with the spectra of pyrotechnic flares widely used for modification at present. The process of formation of the cloud droplet spectra was simulated in the aerosol chamber of the Institute of Experimental Meteorology by decreasing the preliminarily generated excess pressure. It was found in these experiments that, compared to the spectra of particles formed on background condensation nuclei, the introduction of dispersed cement leads to the broadening of spectra and to a decrease in the concentration of droplets. Even at the early stage of condensation, droplets with radii of ∼20 μm appear. In this case, no “overseeding” phenomenon is observed, which, for soluble substances, manifests itself in an increase in the concentration of cloud droplets with a large ACN concentration. These effects indicate that, according to the existing concepts about the mechanism of warm-cloud modification with hygroscopic substances, the introduction of poorly soluble ACN (in particular, dispersed cement) below the base of cumulus clouds should stimulate coagulation processes and accelerate rain-formation processes. Considerations are given that the introduction of poorly soluble ACN into the already existing cumulus or stratocumulus clouds or fogs should also result in the acceleration of precipitation-formation processes or cloud dispersal. Comparison of cement powder with the well-known means of warm-cloud and fog modification is carried out. Original Russian Text ? N.P. Romanov, A.S. Drofa, N.S. Kim, A.V. Savchenko, G.F. Yaskevich, 2006, published in Izvestiya AN. Fizika Atmosfery i Okeana, 2006, Vol. 42, No. 1, pp. 80–91.     

Effect of upward internal flow on dynamics of riser model subject to shear current

Numerical study about vortex-induced vibration(VIV) related to a flexible riser model in consideration of internal flow progressing inside has been performed.The main objective of this work is to investigate the coupled fluid-structure interaction(FSI) taking place between tensioned riser model,external shear current and upward-progressing internal flow(from ocean bottom to surface).A CAE technology behind the current research which combines structural software with the CFD technology has been proposed.According to the result from dynamic analysis,it has been found that the existence of upward-progressing internal flow does play an important role in determining the vibration mode(/dominant frequency),vibration intensity and the magnitude of instantaneous vibration amplitude,when the velocity ratio of internal flow against external current is relatively high.As a rule,the larger the velocity of internal flow is,the more it contributes to the dynamic vibration response of the flexible riser model.In addition,multi-modal vibration phenomenon has been widely observed,for asymmetric curvature along the riser span emerges in the case of external shear current being imposed.     

First retrieval of data regarding spatial distribution of Asian dust aerosol from the Geostationary Ocean Color Imager

Aerosol optical thickness (AOT) was retrieved from the Geostationary Ocean Color Imager (GOCI) on board the Communication, Ocean, and Meteorological Satellite (COMS) for the first time. AOT values were retrieved over the ocean at a spatial scale of 0.5 × 0.5 km² by using the look-up table (LUT)-based separation technique. The radiative transfer model (RTM) was used for different models of atmosphere-ocean environmental conditions, taking into account the realistic variability of scattering and absorption. Ocean surface properties affected by whitecaps and pigment content were also taken into account. The results show that the radiance observed by the GOCI amounts to only 5% of the radiation that penetrated the ocean and, consequently, 95% of the radiation is scattered in the atmosphere or reflected at the ocean surface in the visible wavelengths longer than 0.6 ìm. Within these wavelengths, radiance variations at the top of atmosphere (TOA) due to pigment variations are within 10%, while the radiance variation due to wind speed is considerably higher. For verification of GOCI-retrieved AOTs, comparison between GOCI and ground-based sunphotometer measurement at Gosan, Korea (126.10°E, 33.23°N)) showed good correlation (r = 0.99). The GOCI observations obtained by using the proposed technique showed promising results for the daily monitoring of atmospheric aerosol loading as well as being useful for environmental supervisory authorities.     

Radium tracing of submarine groundwater discharge (SGD) and associated nutrient fluxes in a highly-permeable bed coastal zone, Korea

In order to estimate submarine groundwater discharge (SGD) and SGD-driven nutrient fluxes, we measured the concentrations of nutrients, ²²⁴Ra, and ²²⁶Ra in seawater, river water, and coastal groundwater of Yeongil Bay (in the southeastern coast of Korea) in August 2004 and February 2005. The bottom sediments over the shallow areas of this bay are composed mainly of coarse sands. Large excess concentrations of ²²⁴Ra, ²²⁶Ra, and Si supplied from SGD were observed in August 2004, while these excess concentrations were not apparent in February 2005. Based on the mass balance for ²²⁴Ra, ²²⁶Ra, and Si, which showed conservative mixing behavior in seawater, SGD was estimated to be approximately 6 × 10⁶ m³ day^− 1 (seepage rate = 0.2 m day^− 1) in shallow areas (< 9 m water depth) in August 2004, which is much higher than the SGD level typically found in other coastal regions worldwide. During the summer period, SGD-driven nutrients in this bay contributed approximately 98%, 12%, and 76% of the total inputs for dissolved inorganic nitrogen (DIN), phosphorus (DIP), and silicate (DSi), respectively. Our study implies that the ecosystem in this highly permeable bed coastal zone is influenced strongly by SGD during summer, while such influences are negligible in winter.     

Development of the cyclic p–y curve for a single pile in sandy soil

Pile foundations that support transmission towers or offshore structures are dominantly subjected to cyclic lateral load induced by wind and waves. For a successful design, it is crucial to investigate the effect of cyclic lateral loads on the pile behavior that is loaded laterally. Although the p–y curve method is generally utilized to design the cyclic laterally loaded pile foundations, the effect of cyclic lateral loads on the pile has not been properly implemented with the p–y curve. This reflects a lack of consideration of the overall stiffness change in soil–pile interaction. To address this, a series of model pile tests were conducted in this study on a preinstalled aluminum flexible pile under various sandy soil conditions. The test results were used to investigate the effect of cyclic lateral loads on the p–y behavior. The cyclic p–y curve, which properly takes into account this effect, was developed as a hyperbolic function. Pseudo-static analysis was also conducted with the proposed cyclic p–y curve, which showed that it was able to properly simulate cyclic laterally loaded pile behavior in sandy soil.