Effect of soil water-repellent layer depth on post-wildfire hydrological processes

Soil water repellency induced by wildfires can alter hydraulic properties and hydrologic processes; however, the persistence and vertical position (i.e., depth) of water-repellent layers can vary between systems and fires, with limited understanding of how those variations affect infiltration processes. This study occurred in two forested locations in the south-central Appalachian Mountains that experienced wildfires in late 2016: Mount Pleasant Wildfire Refuge, Virginia, and Chimney Rock State Park, North Carolina. In each location, sites were selected to represent unburned conditions and low to moderate burn intensities. At each site, we measured the soil water repellency at the surface (ash layer or O horizon) and ~2 cm below the surface (A horizon) using the water drop penetration time method (n = 10–14). Soil water content was also measured over the upper 10 cm of the soil (n = 10), and infiltration tests were conducted using a tension infiltrometer (n = 6–8). The results showed that soil repellency was highest in the surface layer at the Mount Pleasant location and was highest in the subsurface layer at the Chimney Rock location. Soil water content was lower in unburned soil than in burned soil, especially for measurements taken immediately postfire, with soil water content negatively correlated with water repellency. Water repellency in the surface layer significantly reduced relative infiltration rates (estimated as differences between initial and steady-state rates), whereas subsurface water repellency did not affect relative infiltration. As a result, water repellency persisted longer in sites with surface as opposed to subsurface water repellency. Finally, differences between burned and unburned sites showed that although the wildfires increased the occurrence of water repellency, they did not alter the underlying relationship between relative infiltration and water repellency of the surface soil.     

Amplification effect of cascading breach discharge of landslide dams

Landslides - Affected by earthquakes and heavy rainfall, multiple landslide dams often cluster closely together along river reaches or gullies. Compared with a single landslide dam, the burst flood...     

2018 Continues Record Global Ocean Warming

The increasing heat-trapping gases emitted by human activities into the atmosphere produce an energy imbalance between incoming solar radiation and outgoing longwave radiation that leads to global heating(Rhein et al.,2013;Trenberth et al.,2014;von Schuckmann et al.,2016).The vast majority of global warming heat ends up deposited in the world’s oceans,and ocean heat content(OHC)change is one of the best—if not the best—metric for climate change(Cheng et al.,2019).In 2018,continued record heat was measured in the Earth’s climate system.In fact,2018 has set a new record of ocean heating,surpassing 2017,which was the previous warmest year ever recorded(Cheng et al.,2018)(Fig.1).     

Using Soil Magnetic Properties to Determine the Onset of Pleistocene Human Settlement at Gledswood Shelter 1, Northern Australia

In regions that lack built structures or stratified open archaeological sites, such as precolonial Australia, rockshelters are a major source of detailed information for understanding the nature and timing of human occupation. A key concern is that the proposed ages for the earliest archaeological sites are based on luminescence dating of sediments, rather than directly of cultural materials, leaving the association between the sediments and evidence of human activity questionable. Here, we present evidence of magnetic enhancement associated with cultural horizons within the deposits of a Pleistocene rockshelter in interior northern Queensland. Soil magnetic studies combined with experimental burning show that magnetically enhanced sediments in Gledswood Shelter 1 are the result of anthropogenic burning of hearth fires, which burn hotter and for a longer time than natural wild fires. These techniques appear to work in this setting because of the nature of the local geology and the geological antiquity of the landscape. Susceptibility and frequency dependence of susceptibility signatures provide a critical tool to resolve that human occupation starts at 2.2 m depth within a stratigraphic section. In conjunction with luminescence dating, soil magnetic studies provide an opportunity for archaeologists to resolve the timing of human settlement in Australia and other intracratonic plate settings.     

The chlorine isotope composition of Martian meteorites 2. Implications for the early solar system and the formation of Mars

We determined the chlorine isotope composition of 16 Martian meteorites using gas source mass spectrometry on bulk samples and in situ secondary ion microprobe analysis on apatite grains. Measured δ³⁷Cl values range from ?3.8 to +8.6‰. The olivine‐phyric shergottites are the isotopically lightest samples, with δ³⁷Cl mostly ranging from ?4 to ?2‰. Samples with evidence for a crustal component have positive δ³⁷Cl values, with an extreme value of 8.6‰. Most of the basaltic shergottites have intermediate δ³⁷Cl values of ?1 to 0‰, except for Shergotty, which is similar to the olivine‐phyric shergottites. We interpret these data as due to mixing of a two‐component system. The first component is the mantle value of ?4 to ?3‰. This most likely represents the original bulk Martian Cl isotope value. The other endmember is a ³⁷Cl‐enriched crustal component. We speculate that preferential loss of ³⁵Cl to space has resulted in a high δ³⁷Cl value for the Martian surface, similar to what is seen in other volatile systems. The basaltic shergottites are a mixture of the other two endmembers. The low δ³⁷Cl value of primitive Mars is different from Earth and most chondrites, both of which are close to 0‰. We are not aware of any parent‐body process that could lower the δ³⁷Cl value of the Martian mantle to ?4 to ?3‰. Instead, we propose that this low δ³⁷Cl value represents the primordial bulk composition of Mars inherited during accretion. The higher δ³⁷Cl values seen in many chondrites are explained by later incorporation of ³⁷Cl‐enriched HCl‐hydrate.     

Managing Bay and Estuarine Ecosystems for Multiple Services

Managers are moving from a model of managing individual sectors, human activities, or ecosystem services to an ecosystem-based management (EBM) approach which attempts to balance the range of services provided by ecosystems. Applying EBM is often difficult due to inherent tradeoffs in managing for different services. This challenge particularly holds for estuarine systems, which have been heavily altered in most regions and are often subject to intense management interventions. Estuarine managers can often choose among a range of management tactics to enhance a particular service; although some management actions will result in strong tradeoffs, others may enhance multiple services simultaneously. Management of estuarine ecosystems could be improved by distinguishing between optimal management actions for enhancing multiple services and those that have severe tradeoffs. This requires a framework that evaluates tradeoff scenarios and identifies management actions likely to benefit multiple services. We created a management action-services matrix as a first step towards assessing tradeoffs and providing managers with a decision support tool. We found that management actions that restored or enhanced natural vegetation (e.g., salt marsh and mangroves) and some shellfish (particularly oysters and oyster reef habitat) benefited multiple services. In contrast, management actions such as desalination, salt pond creation, sand mining, and large container shipping had large net negative effects on several of the other services considered in the matrix. Our framework provides resource managers a simple way to inform EBM decisions and can also be used as a first step in more sophisticated approaches that model service delivery.     

Remote sensing of soybean stress as an indicator of chemical concentration of biosolid amended surface soils

The accumulation of heavy metals in the biosolid amended soils and the risk of their uptake into different plant parts is a topic of great concern. This study examines the accumulation of several heavy metals and nutrients in soybeans grown on biosolid applied soils and the use of remote sensing to monitor the metal uptake and plant stress. Field and greenhouse studies were conducted with soybeans grown on soils applied with biosolids at varying rates. The plant growth was monitored using Landsat TM imagery and handheld spectroradiometer in field and greenhouse studies, respectively. Soil and plant samples were collected and then analyzed for several elemental concentrations. The chemical concentrations in soils and roots increased significantly with increase in applied biosolid concentrations. Copper (Cu) and Molybdenum (Mo) accumulated significantly in the shoots of the metal-treated plants. Our spectral and Landsat TM image analysis revealed that the Normalized Difference Vegetative Index (NDVI) can be used to distinguish the metal stressed plants. The NDVI showed significant negative correlation with increase in soil Cu concentrations followed by other elements. This study suggests the use of remote sensing to monitor soybean stress patterns and thus indirectly assess soil chemical characteristics.     

Simultaneous time-lapse electrical resistivity inversion

Time-lapse monitoring is a powerful tool for observing dynamic changes in the subsurface. In particular it offers the potential for achieving inversion results with increased fidelity through the inclusion of complementary information from multiple time-steps. This inclusion of complementary information can reduce the need for spatial smoothing, without adding inversion artifacts to the resulting images. Commonly used time-lapse inversion methods include the ratio method, cascaded time-lapse inversion, difference inversion and differencing independent inversions. We introduce two additional methods in which both time-lapse data sets are inverted simultaneously. In the first, called temporally constrained time-lapse inversion, inversion of both datasets is done under a single optimization procedure and constraints are added to the regularization to ensure that the changes from one time to another are smooth. In the second method, called simultaneous time-lapse inversion, the inversions at time 1 and time 2 are performed simultaneously and constraints of smoothness and closeness to a reference model are applied to the difference image produced at each iteration, and subsequently, the constraints are updated at each iteration. Through both a numerical and a field example we compare the results of common time-lapse inversion methods as well as the introduced approaches. We found that of the commonly used time-lapse inversion methods the difference inversion method produced the best resolution of time-lapse changes and was the most robust in the presence of noise. However, we found that the alternative approach of simultaneous time-lapse inversion produced the best reconstruction of modeled EC changes in the numerical example and easily interpretable high resolution difference images in the field example. Moreover, there was less tailoring of regularization parameters with our simultaneous time-lapse approach, suggesting that it will lend itself well to an automated inversion code.