A Spectrum-Independent Procedure for Correcting Eddy Fluxes Measured with Separated Sensors

We investigate flux underestimates in eddy correlation measurements that are caused by horizontal separation of the sensors. A common eddy correlation setup consists of a sonic anemometer and a humidity sensor which, because of its bulk, must be placed some distance away from the sonic path, leading to a flux loss (of latent heat). Utilizing an additional fast temperature sensor placed near the humidity sensor, we develop a procedure for correcting for this loss. The procedure simultaneously corrects the sensible heat flux for the difference between true temperature and sonic temperature. Our correction procedure, which does not depend on the shape of the cospectrum, is then compared to the widely-used procedure following Moore (1986), which assumes a cospectral model ('Kansas Model). Both correction methods are applied to data collected within the internal boundary layer over a rice paddy, downwind of arid land. Under conditions of good fetch, they were found to agree well. Under poor fetch conditions, the model-based correction tended to be too small, while the spectrum-independent combined correction was robust. The latter is thus recommended for situations where the cospectral shape can be expected to deviate from the 'Kansas shape.     

Carbon and sulfur in the Swaziland sequence

Sedimentary and igneous rocks of the Swaziland Sequence of South Africa (>3,200 my. old) contain total carbon (0.09–8.28%), organic carbon (0.04–1.95%) and sulfur (9–53,000 ppm). Amounts of organic carbon are generally high in the lower part of the Sequence (based on two samples from the Theespruit Formation). Sulfur content varies widely with no obvious correlations or trends. These rocks may contain clues to the early carbon and sulfur cycles on earth.     

A discrete particle representation of hillslope hydrology: hypothesis testing in reproducing a tracer experiment at Gårdsjön,Sweden

Despite the long history of the continuum equation approach in hydrology, it is not a necessary approach to the formulation of a physically based representation of hillslope hydrology. The Multiple Interacting Pathways (MIPs) model is a discrete realization that allows hillslope response and transport to be simultaneously explored in a way that reflects the potential occurrence of preferential flows and lengths of pathways. The MIPs model uses random particle tracking methods to represent the flow of water within the subsurface alongside velocity distributions that acknowledge preferential flows and transition probability matrices, which control flow pathways. An initial realization of this model is presented here in application to a tracer experiment carried out in Gårdsjön, Sweden. The model is used as an exploratory tool, testing several hypotheses in relation to this experiment. Copyright © 2011 John Wiley & Sons, Ltd.     

Mapping block-and-ash flow hazards based on Titan 2D simulations: a case study from Mt. Taranaki,NZ

Numerical models for simulation of mass flows are typically focussed upon accurately predicting the paths, travel times and inundation from a single flow or collapse event. When considering catchment-based hazards from a volcano, this is complicated by often being faced with several possible scenarios. Over the last 800 years at Mt. Taranaki/Egmont, a number of dome growth and collapse events have resulted in the genesis and emplacement of block-and-ash flows (BAFs). Each BAF was directed northwestward by a breach in the crater rim. The latest dome collapse events in the AD 1880s and AD 1755 inundated the northwestern flank and had run-out lengths 10 km from source. Future activity of this type could have a devastating effect on the Taranaki region’s communities, infrastructure and economy. Hazard planning has involved constructing volcanic hazard maps based upon the areas inundated by past volcanic flows, with little consideration of present-day topography. Here, a numerical geophysical mass flow modelling approach is used to forecast the hazards of future comparable BAF events on NW Mt. Taranaki. The Titan2D programme encompasses a “shallow water”, continuum solution-based, granular flow model. Flow mechanical properties needed for this approach include estimates of internal and basal friction as well as the physical dimensions of the initial collapse. Before this model can be applied to Taranaki BAFs, the input parameters must be calibrated by simulating a range of past collapse events. By using AD 1860 and AD 1755 scenarios, initial collapse volumes can be well constrained and internal and basal friction angles can be evaluated through an iterative approach from previous run-out lengths. A range of possible input parameters was, therefore, determined to produce a suite of potentially inundated areas under present-day terrain. A suite of 10 forecasts from a uniformly distributed range were combined to create a map of relative probabilities of inundation by future BAF events. These results were combined in a GIS package to produce hazard zones related to user-specified hazard thresholds. Using these input parameter constraints, future hazard forecasts for this scale and type of event can also take into account changing summit and topographic configurations following future eruptive or collapse events.     

Using simulated hydrologic response to revisit the 1973 Lerida Court landslide

Hydrologically driven mass wasting in the form of landslides on steep slopes is a worldwide occurrence. High-profile events in, for example, Brazil, Chile, the Philippines, Puerto Rico, and Venezuela during the last three decades all clearly illustrate, based upon significant losses of life and property, that hydrologically driven slope instability in developed (urban) areas can be a major geologic/environmental hazard. The focus of this study is the 1973 hydrologically driven Lerida Court landslide in Portola Valley, CA, USA. Physics-based hydrologic-response simulation, with the comprehensive Integrated Hydrology Model, was employed to forensically estimate the spatiotemporal pore pressure distributions for the Lerida Court site. Slope stability, driven by the simulated pore pressure dynamics, was estimated for the Lerida Court site with the infinite slope/Factor of Safety approach. The pore pressure dynamics for the Lerida Court site were reasonably captured by the hydrologic-response simulation. The estimated time of slope failure for the Lerida Court site compares well with field observations. A recommendation is made that hydrologically driven slope stability estimates including variably saturated subsurface flow be standard protocol for development sites in steep urban settings.     

Modeling the environmental susceptibility of landfill sites in California

??The proper management of solid waste (SW) is a global environmental challenge. A major issue is the proper disposal of SW while balancing a wide range of criteria and working with different spatial data. In this study, we used geographic information system as a tool to perform multi-criteria decision analysis with an analytical hierarchy process to develop an environmental impact susceptibility model (EISM) for landfills. The model was applied to the state of California, USA and results are presented herein. In particular, the EISM considers factors such as geology, pedology, geomorphology, water resources, and climate as represented by 13 associated environmental indicators. The results of the EISM indicate that more than 75% of California’s territory is situated in areas with very low, low, and medium environmental impact susceptibility categories. However, in the remaining 25% of the state’s land, 61 landfills are located in the high and very high categories. These results are alarming because during the period from 2000 to 2015, these 61 landfills received approximately 308 million tons of SW, which corresponds to more than 57% of all SW disposed in California. The model results can be used toward mitigating the environmental impacts of these facilities.     

A New Wavelet Method for Identification of Eddies and Assessment of Incidents on Islands of the Eastern Caribbean

Using two dimensional continuous wavelet transforms, a novel method for identification of mesoscale eddies is presented to facilitate extraction of characteristics for area, amplitude, type, and location from maps of sea level anomalies. In comparison with the previously established growing method for eddy identification, it is found that the wavelet method identifies more than twice the number of eddies and is particularly better at resolving small eddies down to the 0.25 degree resolution of the data. Such research into eddy identification and tracking is significant to the assessment of eddies with potential to impact on coastlines of small islands. The method is applied to the identification of eddies on tracks towards islands of the Eastern Caribbean over 23?years. Spatial and temporal variation in rate of occurrence and magnitude is established. For Barbados there is an average of 9 anticyclonic incidents a year with maximum amplitude of typically 0.22?m in the dry seasons and 0.16?m in the wet seasons. Seasonal variation is reversed for the other islands with twice the number of anticyclonic incidents having maximum amplitudes of about 0.20?m annually.