Distribution, magnitude and characterization of the toxicity of Ukrainian estuarine sediments

During the Soviet era, Ukraine was an important industrial and agricultural region of the Soviet Union. This industrial and agricultural activity resulted in contamination of Ukraine’s estuaries with legacy anthropogenic pollutants. Investigations on the toxicological effects of this estuarine contamination have been limited. For this research, we measured the toxicity of contaminated sediments from four Ukrainian estuaries to several aquatic organisms over 3 years. Sediment chemical analyses and whole sediment toxicity identification evaluations (TIEs) were also performed to determine the classes of contaminants contributing to toxicity. Toxic sediments were observed in several of the Ukrainian estuaries and chemical analyses of the sediments demonstrated anthropogenic contaminants were widely distributed. Contaminants were also detected in macrobenthic organisms collected from the sediments. Several lines of evidence, including TIEs, indicated hydrophobic organic chemicals (HOCs) were contributing substantially to observed toxicity. This information can guide environmental managers to prioritize portions of the estuaries requiring remediation.     

Sediment dynamics below retreating cliffs

The retreat of cliffs may constitute the dominant erosional response to base‐level fall in arid settings underlain by horizontally‐bedded sedimentary rock. These vertical cliffs typically loom above a relatively straight bedrock slope (‘plinth’) that is mantled with a thin layer of sediment and perched near the angle of repose. In detail, a plinth consists of a system of quasi‐parallel ridges and channels. We ask how the sediment supplied from a retreating cliff influences the erosion of the plinth hillslopes and channels, and how this affects the rate of cliff retreat. Motivated by field observations and high‐resolution topographic data from two sites in western Colorado, we develop a two‐dimensional (2D), rules‐based numerical model to simulate the erosion of channels draining a plinth and diffusive erosion of the intervening interfluves. In this model, retreat of a cliffband occurs when the height of the vertical cliff exceeds a threshold due to incision by channels on the plinth below. Debris derived from cliff retreat is distributed over the model plinth according to the local topography and distance from the source. This debris then weathers in place, and importantly can act to reduce local bedrock erosion rates, protecting both the plinth and ultimately the cliff from erosion. In this paper, we focus on two sets of numerical model experiments. In one suite, we regulate the rate of rockfall to limit the cliff retreat rate; in most cases, this results in complete loss of the plinth by erosion. In a second suite, we do not impose a limit on the cliff retreat rate, but instead vary the weathering rate of the rockfall debris. These runs result in temporally steady cliff‐plinth forms and retreat rates; both depend on the weathering rate of the debris. Copyright © 2011 John Wiley & Sons, Ltd.     

Geographical distribution of red and green Noctiluca scintillans

The dinoflagellate Noctiluca scintillans is one of the most important and abundant red tide organisms and it is distributed world-wide. It occurs in two forms. Red Noctiluca is heterotrophic and fills the role of one of the microzooplankton grazers in the foodweb. In contrast, green Noctiluca contains a photosynthetic symbiont Pedinomonas noctilucae (a prasinophyte), but it also feeds on other plankton when the food supply is abundant. In this review, we document the global distribution of these two forms and include the first maps of their global distribution. Red Noctiluca occurs widely in the temperate to sub-tropical coastal regions of the world. It occurs over a wide temperature range of about 10°C to 25°C and at higher salinities (generally not in estuaries). It is particularly abundant in high productivity areas such as upwelling or eutrophic areas where diatoms dominate since they are its preferred food source. Green Noctiluca is much more restricted to a temperature range of 25°C-30°C and mainly occurs in tropical waters of Southeast Asia, Bay of Bengal (east coast of India), in the eastern, western and northern Arabian Sea, the Red Sea, and recently it has become very abundant in the Gulf of Oman. Red and green Noctiluca do overlap in their distribution in the eastern, northern and western Arabian Sea with a seasonal shift from green Noctiluca in the cooler winter convective mixing, higher productivity season, to red Noctiluca in the more oligotrophic warmer summer season.     

An Experimental Apparatus for Laboratory and Field-Based Perfusion of Sediment Porewater with Dissolved Tracers

The water–sediment interface is a dynamic zone where the benthic and pelagic environments are linked through exchange and recycling of organic matter and nutrients. However, it is often difficult to measure rate processes in this zone. To that end, we designed an experimental apparatus for continuous and homogeneous perfusion of sediment porewater with dissolved conservative (SF₆, Rhodamine WT dye) and isotopic (H¹³CO₃⁻ and ¹⁵NH₄⁺) tracers to study nitrogen and carbon cycling by the sediment microbial community of shallow illuminated sediments. The perfusionator consists of a 60-cm ID × 60-cm high cylinder that includes a reservoir for porewater at the base of the sediment column. Porewater amended with conservative and stable isotopic tracers was pumped through a mixing reservoir and upward through the overlying sediments. We tested the perfusionator in a laboratory setting, as part of an outdoor mesocosm array, and buried in coastal sediments. Conservative and isotopic tracers demonstrated that the porewater tracers were distributed homogeneously through the sediment column in all settings. The perfusionator was designed to introduce dissolved stable isotope tracers but is capable of delivering any dissolved ionic, organic, or gaseous constituent. We see a potentially wide application of this technique in the aquatic and marine sciences in laboratory and field settings.     

Mount Elbert Gas Hydrate Stratigraphic Test Well, Alaska North Slope: Overview of scientific and technical program

The Mount Elbert Gas Hydrate Stratigraphic Test Well was drilled within the Alaska North Slope (ANS) Milne Point Unit (MPU) from February 3 to 19, 2007. The well was conducted as part of a Cooperative Research Agreement (CRA) project co-sponsored since 2001 by BP Exploration (Alaska), Inc. (BPXA) and the U.S. Department of Energy (DOE) in collaboration with the U.S. Geological Survey (USGS) to help determine whether ANS gas hydrate can become a technically and commercially viable gas resource. Early in the effort, regional reservoir characterization and reservoir simulation modeling studies indicated that up to 0.34 trillion cubic meters (tcm; 12 trillion cubic feet, tcf) gas may be technically recoverable from 0.92 tcm (33 tcf) gas-in-place within the Eileen gas hydrate accumulation near industry infrastructure within ANS MPU, Prudhoe Bay Unit (PBU), and Kuparuk River Unit (KRU) areas. To further constrain these estimates and to enable the selection of a test site for further data acquisition, the USGS reprocessed and interpreted MPU 3D seismic data provided by BPXA to delineate 14 prospects containing significant highly-saturated gas hydrate-bearing sand reservoirs. The “Mount Elbert” site was selected to drill a stratigraphic test well to acquire a full suite of wireline log, core, and formation pressure test data. Drilling results and data interpretation confirmed pre-drill predictions and thus increased confidence in both the prospect interpretation methods and in the wider ANS gas hydrate resource estimates. The interpreted data from the Mount Elbert well provide insight into and reduce uncertainty of key gas hydrate-bearing reservoir properties, enable further refinement and validation of the numerical simulation of the production potential of both MPU and broader ANS gas hydrate resources, and help determine viability of potential field sites for future extended term production testing. Drilling and data acquisition operations demonstrated that gas hydrate scientific research programs can be safely, effectively, and efficiently conducted within ANS infrastructure. The program success resulted in a technical team recommendation to project management to drill and complete a long-term production test within the area of existing ANS infrastructure. If approved by stakeholders, this long-term test would build on prior arctic research efforts to better constrain the potential gas rates and volumes that could be produced from gas hydrate-bearing sand reservoirs.     

Defining ecological and chemical reference conditions and restoration targets for nine European lakes

This paper aims to determine the ecological and chemical reference conditions (~1800?C1850 AD) and degree of floristic change at nine enriched lakes, covering a range of types across Europe, using fossil diatom assemblages in dated sediment cores and application of total phosphorus (TP) transfer functions. Additionally the study assesses the potential of analogue matching as a technique for identifying reference sites and for estimating reference TP concentrations for the study lakes using a training set of 347 European lakes and 719 diatom taxa. Oligotrophic, acidophilous to circumneutral taxa were predominant in the reference samples of several of the deep lakes, and benthic Fragilaria spp. dominated the reference samples of two high alkalinity shallow lakes. The degree of floristic change from the reference sample, assessed using the squared chord distance (SCD) dissimilarity coefficient, revealed that two sites had experienced slight change (Lago Maggiore, Felbrigg Lake), five experienced moderate change (Mjoesa, Loch Davan, Loch Leven, White Lough, Esthwaite Water), and two showed evidence of major change (Groby Pool, Piburger See). For three lakes, there were no analogues in the diatom dataset owing to the uniqueness and diversity of the diatom reference assemblages. For the remaining six sites the number of analogues ranged from 2 to 44. For two deep lakes most of the analogues seemed appropriate as they were of the same type and had low TP concentrations. However, for two other deep lakes and two shallow lakes some of the analogues differed markedly in their depth and alkalinity from the lake in question or had TP concentrations seemingly too high to represent reference conditions suggesting that the analogues may not be suitable as reference sites. For the deep lakes, similar reference TP values were calculated using the EDDI Combined TP transfer function and the analogue matching technique with concentrations typically <20 ??g L^?1. However, for the shallow lakes, the analogue matching method produced inferred values considerably higher than those of the transfer function. The wide ecological tolerances of many of the diatom taxa found in the reference samples most likely explain the selection of inappropriate analogue sites. In summary, the study demonstrates that palaeoecological techniques can play a valuable role in determining reference conditions and indicates that the analogue matching technique has the potential to be a useful tool for identifying appropriate reference sites for lakes impacted by eutrophication.     

Standard candles from the Gaia perspective

The ESA Gaia mission will bring a new era to the domain of standard candles. Progresses in this domain will be achieved thanks to unprecedented astrometric precision, whole-sky coverage and the combination of photometric, spectrophotometric and spectroscopic measurements. The fundamental outcome of the mission will be the Gaia catalogue produced by the Gaia Data Analysis and Processing Consortium (DPAC), which will contain a variable source classification and specific properties for stars of specific variability types. We review what will be produced for Cepheids, RR Lyrae, Long Period Variable stars and eclipsing binaries.     

AVIATR—Aerial Vehicle for In-situ and Airborne Titan Reconnaissance

We describe a mission concept for a stand-alone Titan airplane mission: Aerial Vehicle for In-situ and Airborne Titan Reconnaissance (AVIATR). With independent delivery and direct-to-Earth communications, AVIATR could contribute to Titan science either alone or as part of a sustained Titan Exploration Program. As a focused mission, AVIATR as we have envisioned it would concentrate on the science that an airplane can do best: exploration of Titan??s global diversity. We focus on surface geology/hydrology and lower-atmospheric structure and dynamics. With a carefully chosen set of seven instruments??2 near-IR cameras, 1 near-IR spectrometer, a RADAR altimeter, an atmospheric structure suite, a haze sensor, and a raindrop detector??AVIATR could accomplish a significant subset of the scientific objectives of the aerial element of flagship studies. The AVIATR spacecraft stack is composed of a Space Vehicle (SV) for cruise, an Entry Vehicle (EV) for entry and descent, and the Air Vehicle (AV) to fly in Titan??s atmosphere. Using an Earth-Jupiter gravity assist trajectory delivers the spacecraft to Titan in 7.5 years, after which the AVIATR AV would operate for a 1-Earth-year nominal mission. We propose a novel ??gravity battery?? climb-then-glide strategy to store energy for optimal use during telecommunications sessions. We would optimize our science by using the flexibility of the airplane platform, generating context data and stereo pairs by flying and banking the AV instead of using gimbaled cameras. AVIATR would climb up to 14?km altitude and descend down to 3.5?km altitude once per Earth day, allowing for repeated atmospheric structure and wind measurements all over the globe. An initial Team-X run at JPL priced the AVIATR mission at FY10 $715M based on the rules stipulated in the recent Discovery announcement of opportunity. Hence we find that a standalone Titan airplane mission can achieve important science building on Cassini??s discoveries and can likely do so within a New Frontiers budget.     

n-Alkane evidence for the onset of wetter conditions in the Sierra Nevada,California (USA) at the mid-late Holocene transition, ~ 3.0 ka

n-Alkane biomarker distributions in sediments from Swamp Lake (SL), in the central Sierra Nevada of California (USA), provide evidence for an increase in mean lake level ~ 3000 yr ago, in conjunction with widespread climatic change inferred from marine and continental records in the eastern North Pacific region. Length distributions of n-alkane chains in modern plants growing at SL were determined and compared to sedimentary distributions in a core spanning the last 13 ka. As a group, submerged and floating aquatic plants contained high proportions of short chain lengths (< nC₂₅) compared to emergent, riparian and upland terrestrial species, for which chain lengths > nC₂₇ were dominant. Changes in the sedimentary n-alkane distribution over time were driven by variable inputs from plant sources in response to changing lake level, sedimentation and plant community composition. A shift toward shorter chain lengths (nC_21, nC₂₃) occurred between 3.1 and 2.9 ka and is best explained by an increase in the abundance of aquatic plants and the availability of shallow-water habitat in response to rising lake level. The late Holocene expansion of SL following a dry mid-Holocene is consistent with previous evidence for increased effective moisture and the onset of wetter conditions in the Sierra Nevada between 4.0 and 3.0 ka.     

The relationship between fire behaviour measures and community loss: an exploratory analysis for developing a bushfire severity scale

Current fire danger scales do not adequately reflect the potential destructive force of a bushfire in Australia and, therefore, do not provide fire prone communities with an adequate warning for the potential loss of human life and property. To determine options for developing a bushfire severity scale based on community impact and whether a link exists between the energy release rate (power) of a fire and community loss, this paper reviewed observations of 79 wildfires (from 1939 to 2009) across Victoria and other southern states of Australia. A methodology for estimating fire power based on fuel loading, fire size and progression rate is presented. McArthur??s existing fire danger indices (FDIs) as well as fuel- and slope-adjusted FDIs were calculated using fire weather data. Analysis of possible relationships between fire power, FDIs, rate of spread and Byram??s fireline intensity and community loss was performed using exposure as a covariate. Preliminary results showed that a stronger relationship exists between community loss and the power of the fire than between loss and FDI, although fuel-adjusted FDI was also a good predictor of loss. The database developed for this study and the relationships established are essential for undertaking future studies that require observations of past fire behaviour and losses and also to form the basis of developing a new severity scale.