Enhanced fault detection and exclusion based on Kalman filter with colored measurement noise and application to RTK

GPS Solutions - The tropospheric delay is an important error source in the Global Positioning System (GPS) positioning and navigation applications. Although most of the tropospheric delays can be...     

A cavity expansion–based solution for interpretation of CPTu data in soils under partially drained conditions

A cavity expansion–based solution is proposed in this paper for the interpretation of CPTu data under a partially drained condition. Variations of the normalized cone tip resistance, cone factor, and undrained-drained resistance ratio are examined with different initial specific volume and overconsolidation ratio, based on the exact solutions of both undrained and drained cavity expansion in CASM, which is a unified state parameter model for clay and sand. A drainage index is proposed to represent the partially drained condition, and the critical state after expansion and stress paths of cavity expansion are therefore predicted by estimating a virtual plastic region and assuming a drainage-index–based mapping technique. The stress paths and distributions of stresses and specific volume are investigated for different values of drainage index, which are also related to the penetration velocity with comparisons of experimental data and numerical results. The subsequent consolidation after penetration is thus predicted with the assumption of constant deviatoric stress during dissipation of the excess pore pressure. Both spherical and cylindrical consolidations are compared for dissipation around the cone tip and the probe shaft, respectively. The effects of overconsolidation ratio on the stress paths and the distributions of excess pore pressure and specific volume are then thoroughly investigated. The proposed solution and the findings would contribute to the interpretation of CPTu tests under a random drained condition, as well as the analysis of pile installation and the subsequent consolidation.     

Three-dimensional active earth pressure from cohesive backfills with tensile strength cutoff

Most of previous analyses on the active earth pressure were performed in two-dimensional cases using the Mohr-Coulomb (M-C) failure function to describe the soil strength. However, all failures of retained slopes indicate a somewhat three-dimensional (3D) feature, and the M-C function is found to overestimate the tensile strength of cohesive soil. In this work, a kinematic limit analysis–based approach is developed for computing the 3D active earth pressure resulting from cohesive backfills. The concept of tensile strength cutoff is adopted to implement the reduction or elimination of tensile strength from the strength envelope. An extended 3D horn failure mechanism that is associated with the modified strength envelope is developed to characterize the collapse of retained slopes. The resultant of active earth pressure is evaluated from the work rate balance equation and expressed as an unfactored coefficient. The obtained results indicate that less support provided by the wall is required when allowing the existence of soil cohesion and 3D effects and that eliminating the tensile strength can observably increase the active earth pressure, especially for the backfill with a great level of cohesion.     

Peatland initiation and carbon dynamics in northeast China: links to Holocene climate variability

Throughout northeast China, the widely distributed peatlands have formed a large carbon (C) pool. However, the relationship between peatland initiation and climate controls is still poorly documented and understood. Understanding the responses of these C‐rich ecosystems to past climate change will provide useful insights into projecting the fate of peatland C in the future. In this study, we present a detailed historical reconstruction of peatland development in northeast China based on 312 basal peat dates, and examine the relationship between Holocene peatland dynamics and climate sensitivity. Our results indicate that peatland initiation started in the early Holocene, and that the majority of peatlands were initiated by and developed during the late Holocene. After the most intensive initiation period of 4.2–0.8 ka, the rate of peatland development slowed, which was concomitant with decreasing insolation and monsoon intensity. The widespread peatland initiation in the late Holocene might have been caused by the cool and moist climate patterns. The optimum timing of the peatland development was not uniform across northeast China, and these spatio‐temporal differences indicate the influences of regional climate and terrain on peatland initiation. Peat‐core data show variations in the long‐term apparent rate of C accumulation (LORCA) during the Holocene, with an average rate of 37.2 g C m^?2 a^?1. The peak LORCA occurred during 10.5–9.0 ka, probably in response to higher temperatures and stronger East Asia summer monsoon intensities. Both temperature and humidity are important factors influencing the peatland initiation and C dynamics in this region.     

Zircon U–Pb ages and Hf isotope compositions of migmatites from the North Qinling terrane and their geological implications

Migmatites are predominant in the North Qinling (NQ) orogen, but their formation ages are poorly constrained. This paper presents a combined study of cathodoluminescence imaging, U–Pb age, trace element and Hf isotopes of zircon in migmatites from the NQ unit. In the migmatites, most zircon grains occur as new, homogeneous crystals, while some are present as overgrowth rims around inherited cores. Morphological and trace element features suggest that the zircon crystals are metamorphic and formed during partial melting. The inherited cores have oscillatory zoning and yield U–Pb ages of c. 900 Ma, representing their protolith ages. The early Neoproterozoic protoliths probably formed in an active continental margin, being a response to the assembly of the supercontinent Rodinia. The migmatite zircon yields Hf model ages of 1911 ± 20 to 990 ± 22 Ma, indicating that the protoliths were derived from reworking of Palaeoproterozoic to Neoproterozoic crustal materials. The anatexis zircon yields formation ages ranging from 455 ± 5 to 420 ± 4 Ma, with a peak at c. 435 Ma. Combined with previous results, we suggest that the migmatization of the NQ terrane occurred at c. 455–400 Ma. The migmatization was c. 50 Ma later than the c. 490 Ma ultra‐high‐P (UHP) metamorphism, indicating that they occurred in two independent tectonic events. By contrast, the migmatization was coeval with the granulite facies metamorphism and the granitic magmatism in the NQ unit, which collectively argue for their formation due to the northward subduction of the Shangdan Ocean. UHP rocks were distributed mainly along the northern margin and occasionally in the inner part of the NQ unit, indicating that they were exhumed along the northern edge and detached from the basement by the subsequent migmatization process.     

Sedimentary evidence and luminescence and ESR dating of Early Pleistocene high lake levels of Megalake Tengger,northwestern China

The timing of high lake-level stands during the Late Pleistocene in western China remains controversial. Here we report new results from Megalake Tengger based on a study of palaeo-shorelines and a drill core from Baijian Lake in the northwestern Tengger Desert. Multiple dating methods, based on luminescence signals (quartz optically stimulated luminescence, K-feldspar post infrared-infrared stimulated luminescence) and electron spin resonance signals of quartz, were used to date beach sands from palaeo-shoreline profiles at altitudes of ~1310 m (+20 m above lake level), ~1320 m (+30 m) and ~1350 m (+60 m), and from the top 20 m of sandy sediments from the drill core obtained from the modern beach of Baijian Lake. The dating results show that high lake-level stands associated with the previously reported Megalake Tengger (~1310–1320 m) occurred during the late Early to Middle Pleistocene, which is much earlier than previously reported. In addition, no geomorphological evidence of shorelines and sedimentary evidence from the drill core profile were found to support the previously reported Late Pleistocene lake levels. Our results indicate that the exact age of the previously reported ‘high lake level event’ in a large part of northwestern China during the Late Pleistocene needs to be re-evaluated.     

A bounding surface model for anisotropically overconsolidated clay incorporating thermodynamics admissible rotational hardening rule

A bounding surface model is formulated to simulate the behavior of clays that are subject to an anisotropic consolidation stress history. Conventional rotational hardening is revisited from the perspective of thermodynamics. As the free energy cannot be accumulated infinitely upon critical state failure, the deviatoric back stress must vanish. This requires the rotated yield surface to be turned back to eventually align on the hydrostatic axis in the stress plane. Noting that most of the previous propositions violate this restriction, an innovative rotational hardening rule is formulated that is thermodynamically admissible. The bounding surface framework that employs the modified yield surface is applied to simulate elastoplastic deformations for overconsolidated clays, with which the overprediction of strength on the “dry” side can be greatly improved with reasonable results. Other important features, including contractive or dilative response and hardening or softening behavior, can also be well-captured. It has been shown that the model can simulate three types of reconstituted clays that are sheared with initial conditions over a wide range of anisotropic consolidation stress ratios and overconsolidation ratios under both triaxial undrained and drained conditions. Limitations and potential improvement of the model regarding the fabric anisotropy at critical state have been discussed.