Development of crystallographic preferred orientations by nucleation and growth of new grains in experimentally deformed quartz single crystals

Deformation experiments have been carried out to investigate the effect of dynamic recrystallisation on crystallographic preferred orientation (CPO) development. Cylindrical samples of natural single crystals of quartz were axially deformed together with 1 vol.% of added water and 20 mg of Mn₂O₃ powder in a Griggs solid medium deformation apparatus in different crystallographic orientations with compression direction: (i) parallel to <c>, (ii) at 45° to <c> and 45° to <a> and (iii) parallel to <a>. The experiments were performed at a temperature of 800 °C, a confining pressure of 1.2 GPa, a strain rate of  10^− 6 s^− 1, to bulk finite strains of  14–36%. The deformed samples were analysed in detail using optical microscopy, electron backscatter diffraction (EBSD) and transmission electron microscopy (TEM). Two different microstructural domains were distinguished in the deformed samples: (i) domains with undulatory extinction and deformation lamellae, and (ii) domains with new recrystallised grains. Within the domains of undulatory extinction, crystal-plastic deformation caused gradual rotations of the crystal lattice up to  30° away from the host orientation. New recrystallised grains show a strong CPO with c-axis maxima at  45° to the compression direction. This is the case in all experiments, irrespective of the initial crystallographic orientation. The results show that c-axes are not continuously rotated towards the new maxima. The new grains thus developed through a mechanism different from subgrain rotation recrystallisation. New grains have a subeuhedral shape and numerous microcavities, voids, fluid channels and fluid inclusions at their grain boundaries. No host control is recorded in misorientation axes across their large angle grain boundaries. New grains might have been created by nucleation from solution in the μm-scale voids and microfractures. The CPO most likely developed due to preferred growth of the freshly precipitated grains with orientations suitable for intracrystalline deformation at the imposed experimental conditions.     

Characterisation of contemporary local climate change in the mountains of southwest Bulgaria

The Pirin Mountains in southwest Bulgaria spatially mark a transition between the Mediterranean and temperate climate zones. Therefore they are also particularly relevant for research on high mountain climate and the effect of landscape transformation. Historical climate records gathered in the area have been researched, checked and statistically examined. The mountainous climate has been characterised and trends in the evolution of temperature and precipitation since 1931 have been outlined. There are objective evidences for an increasing annual mean temperature, longer vegetative periods and local droughts in spring and autumn. Significant changes also appear in climatic threshold values such as the number of frost change days. This last parameter is very important for the sustainability of mountainous ecosystems.     

Discussion of “How to improve attribution of changes in drought and flood impacts”*

ABSTRACT

The opinion paper by Kreibich et al. provides interesting insights into the interplay between floods and droughts, which are often ignored. The structure of the paper is original and the findings of high interest. It may however be difficult to obtain the required data to pursue the research agenda in actual catchments. This discussion paper suggests various ways in which the linkages between floods and droughts can be explored even if recorded data of sufficient detail is not available.     

Ermittlung der Nachweis-, Erfassungs- und Bestimmungsgrenze nach DIN 32645 mit Hilfe eines Programms Calculation of Detection Limit,Identification Limit and Determination Limit according to DIN 32645 with the Aid of a Computer Programs

The new German standard specification DIN 32645 defines detection, identification and determination limit of analytical experiments and contains formulas for their calculation. The detection limit is a qualitative value, only at the determination limit a quantitative statement is possible. The identification limit is no limit of decision for analyses. The expenditure for calculating these parameters is considerable. Therefore, a computer program was developed and tested at the analysis of herbicides with GC-MS after enrichment with solid phase extraction (SPE). It proved that the program is also very useful at the development of analytical methods, because it allows a quick examination of changes of the analytical method. After optimization detection limits for the herbicides were achieved which amount 10–20% of the limit of the German drinking water regulation.     

Safeguarding the future marine environment of Europe

The priorities for the protection of the seas have been discussed extensively. Many consider that the problem of marine pollution can only be solved on the basis of joint international actions. This is particularly true for the various countries bordering on the North Sea. To implement such ‘Joint Actions’, a new understanding of safety, namely ‘global maritime safety’ should be discussed with all those involved.     

Die geodynamische Entwicklung der Thiersee- und der Karwendelmulde (Nördliche Kalkalpen)

Zusammenfassung Die Thiersee- und die Karwendelmulde in den Nördlichen Kalkalpen sind als zwei getrennte, E-W-verlaufende Synklinen entwickelt. Ihre Länge zwischen Kufstein und Mittenwald beträgt über 70 km.Systematische geologische Aufnahmen — Kartierung, Stratigraphie, Sedimentologie und Gefügekunde — ergaben, daß die Thierseemuide im Raum von Achenkirch nicht — wie früher vermutet wurde — in die Karwendelmulde umbiegt. Die Auswertung von mehr als 45 000 Gefügemessungen mit Hilfe eines EDV-Programms bewies vielmehr, daß Thierseemuide und Karwendelmulde zwei parallele, unabhängige Strukturen sind, die durch die komplizierte tektonische Zone von Achenkirch getrennt werden.Die paläogeographische Entwicklung und der Ablauf der Bewegungen werden im Überblick skizziert.

---

Systematic geological survey showed that the Thiersee and Karwendel synclines in the Northern Calcareous Alps are two parallel structures, separated by a slightly folded intersection. The synclines do not turn into each other, as was presumed by earlier workers.The tectonic situation in the area of Achenkirch was cleared by evaluation of more than 45,000 field texture data by a computer program. Mapping as well as stratigraphical and sedimentological analysis supports the tectonic model. The paleogeographic development and tectonic history are briefly described.

---

Résumé Les dépressions du «Thiersee» et du «Karwendel», dans les Alpes calcaires du Nord, sont deux synclinaux indépendants de direction Est-Ouest. Elles font 70 km de long entre Kufstein et Mittenwald.Des relevés géologiques systématiques — levés géologiques, stratigraphie, sédimentologie et structurologie — démontrèrent que, dans la région d'Achenkirch, la dépression du «Thiersee» ne contourne pas la dépression du «Karwendel» (comme on l'a longtemps supposé!). L'exploitation par ordinateur de plus de 45.000 mesures structurales révéla au contraire, que ces dépressions sont deux structures parallèles et indépendantes, séparées par la zone tectonique complexe d'Achenkirch.Le développement paléogéographique et le déroulement des mouvements font l'objet d'une vue d'ensemble.

---

, . 70 . , - , , — , , . EDV 45 000 , , . .

     

Energy cost-accounting of Louisiana fishery production

A quantitative relationship between gross primary production and secondary production of aquatic upper level consumers was derived for the inshore portion of the Louisiana coastal zone. We estimate that 1,700 units of gross primary production are required to produce one unit of upper level consumers. Lower and mid-level consumers are estimated to require lesser amounts, 300 and 600 units, respectively. Harvested fishery groups in the inshore ecosystem represent a total average of about 23,000 metric tons (dry wt) or about 1.2×10¹¹ Kcal (5.0×10¹¹ KJ) annually. This harvest “costs” the system about 7×10¹³ Kcal (3.3×10¹⁴ KJ) of gross primary production, or an equivalent of 4×10¹⁴ Kcal (1.7×10¹⁵KJ) of fossil fuel.     

Analytical and numerical models to explain steady rates of spring flow

Flow from some springs in former glacial lakebeds of the Upper Midwest is extremely steady throughout the year and does not increase significantly after precipitation events or seasonal recharge. Analytical and simplified numerical models of spring systems were used to determine whether preferential ground water flow through high-permeability features in shallow sandstone aquifers could produce typical values of spring discharge and the unusually steady rates of spring flow. The analytical model is based on a one-dimensional solution for periodic ground water flow. Solutions to this model suggest that it is unlikely that a periodic forcing due to seasonal variations in areal recharge would propagate to springs in a setting where high-permeability features exist. The analytical model shows that the effective length of the aquifer, or the length of flowpaths to a spring, and the total transmissivity of the aquifer have the greatest potential to impact the nature of spring flow in this setting. The numerical models show that high-permeability features can influence the magnitude of spring flow and the results demonstrate that the lengths of ground water flowpaths increase when high-permeability features are explicitly modeled, thus decreasing the likelihood for temporal variations in spring flow.     

Direct Sensor Orientation for Large Scale Mapping—Potential, Problems, Solutions

Georeferencing is one of the most important tasks in photogrammetry. Traditionally it has been achieved indirectly using the well-known method of aerial triangulation. With the availability of integrated GPS and inertial measurement units (IMU), this situation changed. Direct determination of exterior orientation is now possible. Today, direct and integrated sensor orientation is used for a wide range of sensors including lidar and SAR, as well as for digital line scanner systems and aerial cameras. This paper investigates the performance of direct and integrated sensor orientation for large scale mapping using the data-set of the 'Integrated Sensor Orientation' test of the European Organisation for Experimental Photogrammetric Research (OEEPE—now known as EuroSDR). The concept, potential, problems and solutions of direct and integrated sensor orientation are discussed.