Gas hydrate and free gas indications within the Cenozoic succession of the Bjørnøya Basin, western Barents Sea

Multichannel seismic data, containing high-amplitude reflections from Cenozoic sediments of the Bjørnøya Basin, southwestern Barents Sea, have been studied, inferring the existence of gas hydrate and free gas. The Cenozoic succession comprises Late Palaeocene and Early Eocene claystones and siltstones and locally also some sandstones overlain by Late Pleistocene glaciogenic sediments. The inferred gas hydrate and free gas accumulations are mainly located in the vicinity of larger faults which can be followed up to base Tertiary level, and which seem to have controlled the geographical distribution of the accumulations. Free gas accumulations are inferred to occur most frequently within the Late Palaeocene strata that occur below the gas hydrate stability zone, and indicate that relatively small gas leakages from deeper accumulations have dominated. Larger gas leakages have probably led to gas migration up into the gas hydrate stability zone and, together with the increasing thickness of the hydrate stability zone towards the north, control the distribution of the suspected gas hydrates. The inferred gas leakages are closely related to the Cenozoic evolution of the Barents Sea, and are probably caused by gas expansion due to the removal of up to 1 km of sediments from the Barents Sea shelf and/or reservoir tilting during the Late Cenozoic glaciations which affected this area.     

Farm size comparison with analytical model of linear generator wave energy converters

Ocean wave energy is an emerging kind of renewable energy, and several energy conversion methods are available today. One solution is to connect a buoy to a linear generator. Such units are quite small (10–100 kW), and farm solutions are suggested to increase power production. This paper shows the results from small farm simulations where the translator motion is varied for the generators in the farm.Simulations with five and 10 units show that power fluctuations decrease with an increasing number of generators.     

Global change revealed by palaeolimnological records from remote lakes: a review

Over recent decades, palaeolimnological records from remote sites have provided convincing evidence for the onset and development of several facets of global environmental change. Remote lakes, defined here as those occurring in high latitude or high altitude regions, have the advantage of not being overprinted by local anthropogenic processes. As such, many of these sites record broad-scale environmental changes, frequently driven by regime shifts in the Earth system. Here, we review a selection of studies from North America and Europe and discuss their broader implications. The history of investigation has evolved synchronously with the scope and awareness of environmental problems. An initial focus on acid deposition switched to metal and other types of pollutants, then climate change and eventually to atmospheric deposition-fertilising effects. However, none of these topics is independent of the other, and all of them affect ecosystem function and biodiversity in profound ways. Currently, remote lake palaeolimnology is developing unique datasets for each region investigated that benchmark current trends with respect to past, purely natural variability in lake systems. Fostering conceptual and methodological bridges with other environmental disciplines will upturn contribution of remote lake palaeolimnology in solving existing and emerging questions in global change science and planetary stewardship.     

Changing seas in the Early–Middle Miocene of Central Europe: a Mediterranean approach to Paratethyan stratigraphy

The Miocene palaeogeographic evolution of the Paratethys Sea is still poorly constrained. Here, we use modern Mediterranean biochronology to provide an up‐to‐date overview of changing seas in Central Europe. Instead of a Paratethys that waxed and waned with fluctuating global sea levels, we show that the development of different seas was mainly controlled by tectonic phases. The Early Miocene “Ottnangian Sea” (~18 Ma) was connected to the Mediterranean via the Rhône valley, while the “Karpatian Sea” (~16.5 Ma) was initiated by a tectonically induced marine transgression through the Trans‐Tethyan gateway. In most Central European basins, the establishment of the “Badenian Sea” (<15.2 Ma), triggered by subduction‐related processes in the Pannonian and Carpathian domain, is significantly younger (by ~1 Myr) than usually estimated. The updated palaeogeographic reconstructions provide a better understanding of the concepts of basin dynamics, land–sea distribution and palaeoenvironmental change in the Miocene of Central Europe.     

Analysis of shallow gas and fluid migration within the Plio-Pleistocene sedimentary succession of the SW Barents Sea continental margin using 3D seismic data

Three-dimensional (3D) seismic data acquired for hydrocarbon exploration reveal that gas accumulations are common within the 2–3 km thick Plio-Pleistocene stratigraphic column of the south-western Barents Sea continental margin. The 3D seismic data have relatively low-frequency content (<40 Hz) but, due to dense spatial sampling, long source-receiver offsets, 3D migration and advanced interpretation techniques, they provide surprisingly detailed images of inferred gas accumulations and the sedimentary environments in which they occur. The presence of gas is inferred from seismic reflection segments with anomalously high amplitude and reversed phase, compared with the seafloor reflection, so-called bright spots. Fluid migration is inferred from vertical zones of acoustic masking and acoustic pipes. The 3D seismic volume allows a spatial analysis of amplitude anomalies inferred to reflect the presence of gas and fluids. At several locations, seismic attribute maps reveal detailed images of flat spots, inferred to represent gas–water interfaces. The data indicate a focused fluid migration system, where sub-vertical faults and zones of highly fractured sediments are conduits for the migration of gas-bearing fluids in Plio-Pleistocene sediments. Gas is interpreted to appear in high-porosity fan-shaped sediment lobes, channel and delta deposits, glacigenic debris flows and sediment blocks, probably sealed by low-permeability, clayey till and/or (glacio)marine sediments. Gas and fluid flow are here attributed mainly to rapid Plio-Pleistocene sedimentation that loaded large amounts of sedimentary material over lower-density, fine-grained Eocene oozes. This probably caused pore-fluid dewatering of the high-fluid content oozes through a network of polygonal faults. The study area is suggested to have experienced cycles of fluid expulsion and hydrocarbon migration associated with glacial–interglacial cycles.     

Determination of Reference Values for NIST SRM 610–617 Glasses Following ISO Guidelines

We present new reference values for the NIST SRM 610–617 glasses following ISO guidelines and the International Association of Geoanalysts’ protocol. Uncertainties at the 95% confidence level (CL) have been determined for bulk‐ and micro‐analytical purposes. In contrast to former compilation procedures, this approach delivers data that consider present‐day requirements of data quality. New analytical data and the nearly complete data set of the GeoReM database were used for this study. Data quality was checked by the application of the Horwitz function and by a careful investigation of analytical procedures. We have determined quantitatively possible element inhomogeneities using different test portion masses of 1, 0.1 and 0.02 μg. Although avoiding the rim region of the glass wafers, we found moderate inhomogeneities of several chalcophile/siderophile elements and gross inhomogeneities of Ni, Se, Pd and Pt at small test portion masses. The extent of inhomogeneity was included in the determination of uncertainties. While the new reference values agree with the NIST certified values with the one exception of Mn in SRM 610, they typically differ by as much as 10% from the Pearce et al. (1997) values in current use. In a few cases (P, S, Cl, Ta, Re) the discrepancies are even higher.     

Modelling of uranium and neptunium chemistry in a deep rock environment

According to the present concept for final storage of spent nuclear fuel in Sweden, the spent fuel, encapsulated in copper or copper/steel canisters, will be placed in tunnels in a deep rock formation. The canisters will be surrounded by compacted bentonite clay acting as a buffer material. In connection with a safety analysis of such a storage facility, the total solubility of certain elements (e.g., uranium) as well as the transport properties (e.g., retardation due to sorption on mineral surfaces) of the long-lived radionuclides released from the canister have to be predicted or measured. The chemical conditions, governing the solubility and speciation of trace elements encountered in and around the repository depend on interactions between the ground water and the engineering materials in the repository and a production of oxidants due to radiolysis in the spent fuel. In the present study the speciation and solubility of uranium and neptunium in a bentonite-ground water system and in ground waters with compositions measured at a site at äspö, SE Sweden, have been calculated. The calculations have been carried out using a recent version of the geochemical computer code PHREEQE and the database HATCHES 5.0. Predictions of the uranium and neptunium concentrations in the ground water in the vicinity of a damaged high level waste repository have also been performed. The uranium concentration in the water in the bentonite barrier is predicted to be of the same order of magnitude or lower than that found in some granitic ground waters. For neptunium the calculations are uncertain due to the small amount of experimentally determined thermodynamic data and few verifications under the conditions (pH - Eh - carbonate concentration) considered. The predicted concentrations (ca 10^–12 m, corresponds to ca 0.006 Bq/l) may be regarded as high, considering the high toxicity of neptunium and its long half-life.     

A probabilistic seismic hazard assessment for the Turkish territory—part I: the area source model

The seismic zoning map of Turkey that is used in connection with the national seismic design code (versions issued both in 1997 and 2007) is based on a probabilistic seismic hazard assessment study conducted more than 20 years ago (Gülkan et al. in En son verilere göre haz?rlanan Türkiye deprem bölgeleri haritas?, Report No: METU/EERC 93-1, 1993). In line with the efforts for the update of the seismic design code, the need aroused for an updated seismic hazard map, incorporating recent data and state-of-the-art methodologies and providing ground motion parameters required for the construction of the design spectra stipulated by the new Turkish Earthquake Design Code. Supported by AFAD (Disaster and Emergency Management Authority of Turkey), a project has been conducted for the country scale assessment of the seismic hazard by probabilistic methods. The present paper describes the probabilistic seismic hazard assessment study conducted in connection with this project, incorporating in an area source model, all recently compiled data on seismicity and active faulting, and using a set of recently developed ground motion prediction equations, for both active shallow crustal and subduction regimes, evaluated as adequately representing the ground motion characteristics in the region. The area sources delineated in the model are fully parameterized in terms of maximum magnitude, depth distribution, predominant strike and dip angles and mechanism of possible ruptures. Resulting ground motion distributions are quantified and presented for PGA and 5 % damped spectral accelerations at T = 0.2 and 1.0 s, associated with return periods of 475 and 2475 years. The full set of seismic hazard curves was also made available for the hazard computation sites. The second part of the study, which is based on a fault source and smoothed seismicity model is covered in Demircioglu et al. in Bull Earthq Eng, (2016).     

Assessing streams in Germany with benthic invertebrates: development of a practical standardised protocol for macroinvertebrate sampling and sorting

In the past, no single standardised method for sampling and sorting benthic macroinvertebrates has been implemented in Germany. Therefore, we tested the suitability of two common sorting protocols, RIVPACS and AQEM/STAR, by taking samples with each protocol at 44 sampling sites. Our results reveal that different methods deliver slightly different assessment results. Moreover these two methods differ in costs. Although the AQEM/STAR protocol takes longer than the RIVPACS protocol, we favoured the AQEM/STAR protocol because of its higher level of standardisation. In order to limit costs to an acceptable level, a modification of the AQEM/STAR protocol (MAS method) is developed. This method is highly standardised, gives stable assessment results and is relatively inexpensive (€ 224.00 for processing of an average sample). A detailed protocol of the newly developed method is given.     

Age and paragenesis of mineralisation at Coronation Hill uranium deposit,Northern Territory,Australia

Coronation Hill is a U?+?Au?+?platinum group elements deposit in the South Alligator Valley (SAV) field in northern Australia, south of the better known unconformity-style U East Alligator Rivers (EAR) field. The SAV field differs from the EAR by having a more complex basin-basement architecture. A volcanically active fault trough (Jawoyn Sub-basin) developed on older basement and then was disrupted by renewed faulting, before being buried beneath regional McArthur Basin sandstones that are also the main hanging wall to the EAR deposits. Primary mineralisation at Coronation Hill formed at 1607?±?26 Ma (rather than 600–900 Ma as previously thought), and so it is likely that the SAV was part of a single west McArthur Basin dilational event. Most ore is hosted in sub-vertical faults and breccias in the competent volcanic cover sequence. This favoured fluid mixing, acid buffering (forming illite) and oxidation of Fe²⁺ and reduced C-rich assemblages as important uranium depositional mechanisms. However, reduction of U in fractured older pyrite (Pb model age of 1833?±?67 Ma) is an important trap in diorite. Some primary ore was remobilised at 675?±?21 Ma to form coarse uraninite?+?Ni-Co pyrite networks containing radiogenic Pb. Coronation Hill is polymetallic, and in this respect resembles the ‘egress’-style U deposits in the Athabascan Basin (Canada). However, these are all cover-hosted. A hypothesis for further testing is that Coronation Hill is also egress-style, with ores formed by fluids rising through basement-hosted fault networks (U reduction by diorite pyrite and carbonaceous shale), and into veins and breccias in the overlying Jawoyn Sub-basin volcano-sedimentary succession.