High-pressure phase relations in the system TiO2–ZrO2 to 12?GPa: stability of αPbO2-type srilankite solid solutions of (Ti1?x , Zr x )O2 (0?≤?x?≤?0.6)

Phase relations in the system TiO₂–ZrO₂ were examined in the pressure range of 3.5–12?GPa at 1,800?°C, using multianvil apparatus. At 1,800?°C, TiO₂ rutile transforms to αPbO₂ structure at 10?GPa, and the αPbO₂-type solid solution is stable in compositional range between TiO₂ and about (Ti_0.6, Zr_0.4)O₂ at 3.5–12?GPa. Combination of the present results with the published data at 0–3?GPa demonstrates that continuous solid solution with the αPbO₂-type structure is stable between TiO₂ and (Ti_1?x , Zr _x )O₂ (x?≈?0.6) at 0–12?GPa. This indicates that both the αPbO₂-type TiO₂ and srilankite Ti₂ZrO₆ with the same structure belong to the continuous solid solution system though the two phases have been regarded as different minerals. With increasing ZrO₂ content, lattice parameters of a- and c-axes of the αPbO₂-type solid solution increase, but b-axis is almost constant or slightly decreases. At higher pressure, the αPbO₂-type solid solution dissociates into two phases, αPbO₂-type phase and tetragonal zirconia. Srilankite with more TiO₂-rich composition than Ti₂ZrO₆ might be found in natural rocks derived from the deep upper mantle.     

Characteristics of Porphyry Cu Mineralization at Waisoi (Namosi District), Viti Levu, Fiji

The porphyry Cu deposits at Waisoi in Namosi district, Viti Levu are separated into two deposits: the Waisoi East deposit and the Waisoi West deposit. In the Waisoi East deposit, quartz porphyry is exposed and in the Waisoi West deposit, diorite porphyry is sporadically exposed in addition to a small body of quartz porphyry. The mineralization in the Waisoi East deposit is characterized by the bornite–chalcopyrite–pyrite assemblage associated with traces of molybdenite and native gold. Polyphase fluid inclusions in stockwork quartz veinlets show homogenization temperatures ranging from 210 to >500°C. The high‐grade Cu mineralization in the Waisoi West deposit is characterized by the bornite–chalcopyrite–pyrite assemblage accompanied with sheeted and stockwork quartz veinlets. Polyphase fluid inclusions occasionally containing hematite flakes in quartz veinlets in the center of the Waisoi West deposit homogenize at temperatures ranging from 450°C to >500°C. However, fluid inclusions in stockwork quartz veinlets in the periphery, homogenize at lower temperatures around 210°C. Both in the Waisoi East and Waisoi West deposits, primary bornite–chalcopyrite–pyrite assemblage in the high Cu‐grade zone was deposited at the upper stability limit of chalcopyrite with respect to sulfur fugacity. Thus, the principal Cu mineralization at the Waisoi deposits occurred at a relatively high sulfur fugacity, that is, in a high‐sulfidation environment.     

Behavior of manganese in aqua-benthic environment in the Hiro Bay

The horizontal and vertical distributions of manganese in sea water, interstitial water and sediments in the Hiro Bay, Seto Inland Sea, Japan, have been investigated. The outflow from a pulp mill is the primary source of manganese in this bay. The industrial waste water contained 0.19 mg l^–1 of manganese, mostly in a dissolved form. This manganese diffused out both horizontally and vertically into the surrounding sea water. The content of manganese in the liquid and solid phases in the sediments, however, are inverse with that in the sea water; namely the lowest concentration of manganese in the sediments was observed at the station near the outfall and manganese concentration increased with the distance from the outfall.     

Alteration and mass transfer inferred from the Hirabayashi GSJ drill penetrating the Nojima Fault, Japan

Abstract Mineralogical and geochemical studies on the fault rocks from the Nojima–Hirabayashi borehole, south-west Japan, are performed to clarify the alteration and mass transfer in the Nojima Fault Zone at shallow depths. A complete sequence from the hornblende–biotite granodiorite protolith to the fault core can be observed without serious disorganization by surface weathering. The parts deeper than 426.2 m are in the fault zone where rocks have suffered fault-related deformation and alteration. Characteristic alteration minerals in the fault zone are smectite, zeolites (laumontite, stilbite), and carbonate minerals (calcite and siderite). It is inferred that laumontite veins formed at temperatures higher than approximately 100°C during the fault activity. A reverse component in the movement of the Nojima Fault influences the distribution of zeolites. Zeolite is the main sealing mineral in relatively deep parts, whereas carbonate is the main sealing mineral at shallower depths. Several shear zones are recognized in the fault zone. Intense alteration is localized in the gouge zones. Rock chemistry changes in a different manner between different shear zones in the fault zone. The main shear zone (MSZ), which corresponds to the core of the Nojima Fault, shows increased concentration of most elements except Si, Al, Na, and K. However, a lower shear zone (LSZ-2), which is characterized by intense alteration rather than cataclastic deformation, shows a decreased concentration of most elements including Ti and Zr. A simple volume change analysis based on Ti and Zr immobility, commonly used to examine the changes in fault rock chemistry, cannot account fully for the different behaviors of Ti and Zr among the two gouge zones.     

Assessment of grain-scale homogeneity and equilibration of carbon and oxygen isotope compositions of minerals in carbonate-bearing metamorphic rocks by ion microprobe

Nineteen samples of metamorphosed carbonate-bearing rocks were analyzed for carbon and oxygen isotope ratios by ion microprobe with a ∼5-15 μm spot, three from a regional terrain and 16 from five different contact aureoles. Contact metamorphic rocks further represent four groups: calc-silicate marble and hornfels (6), brucite marble (2), samples that contain a reaction front (4), and samples with a pervasive distribution of reactants and products of a decarbonation reaction (4). The average spot-to-spot reproducibility of standard calcite analyses is ±0.37‰ (2 standard deviations, SD) for δ¹⁸O and ±0.71‰ for δ¹³C. Ten or more measurements of a mineral in a sample that has uniform isotope composition within error of measurement can routinely return a weighted mean with a 95% confidence interval of 0.09-0.16‰ for δ¹⁸O and 0.10-0.29‰ for δ¹³C. Using a difference of >6SD as the criterion, only four of 19 analyzed samples exhibit significant intracrystalline and/or intercrystalline inhomogeneity in δ¹³C at the 100-500 μm scale, with differences within individual grains up to 3.7‰. Measurements are consistent with carbon isotope exchange equilibrium between calcite and dolomite in five of six analyzed samples at the same scale. Because of relatively slow carbon isotope diffusion in calcite and dolomite, differences in δ¹³C can survive intracrystalline homogenization by diffusion during cooling after peak metamorphism and likely represent the effects of prograde decarbonation and infiltration. All but 2 of 11 analyzed samples exhibit intracrystalline differences in δ¹⁸O (up to 9.4‰), intercrystalline inhomogeneity in δ¹⁸O (up to 12.5‰), and/or disequilibrium oxygen isotope fractionations among calcite-dolomite, calcite-quartz, and calcite-forsterite pairs at the 100-500 μm scale. Inhomogeneities in δ¹⁸O and δ¹³C are poorly correlated with only a single mineral (dolomite) in a single sample exhibiting both. Because of relatively rapid oxygen isotope diffusion in calcite, intracrystalline inhomogeneities in δ¹⁸O likely represent partial equilibration between calcite and fluid during retrograde metamorphism. Calcite is in oxygen isotope exchange equilibrium with forsterite in one of four analyzed samples, in equilibrium with dolomite in none of six analyzed samples, and in equilibrium with quartz in neither of two analyzed samples. There are no samples of contact metamorphic rock with analyzed reactants and products of an arrested metamorphic reaction that are in oxygen isotope equilibrium with each other. The degree of departure from equilibrium in analyzed samples is variable and is often related, at least in part, to alteration of δ¹⁸O of calcite during retrograde fluid-rock reaction. In situ sub-grain-scale carbon and oxygen isotope analyses of minerals are advisable in the common applications of stable isotope geochemistry to metamorphic petrology. Correlation of sub-mm scale stable isotope data with imaging will lead to improved understanding of reaction kinetics, reactive fluid flow, and thermal histories during metamorphism.     

A Simulation Study of the Plasma Wave Enhancements in the Earth’s Equatorial Plasmasphere

In the equatorial plasmasphere, plasma waves are frequently observed. To improve our understanding of the mechanism generating plasma waves from instabilities, a comparison of observations, linear growth-rate calculations, and simulation results is presented. To start the numerical experiments from realistic initial plasma conditions, we use the initial parameters inferred from observational data obtained around the plasma-wave generation region by the Akebono satellite. The linear growth rates of waves of different modes are calculated under resonance conditions, and compared with simulation results and observations. By employing numerical experiments by a particle code, we first show that upper hybrid-, Z-, and whistler-mode waves are excited through instabilities driven by a ring-type velocity distribution. The simulation results suggest a possibility that energetic electrons with energies of some tens of keV confined around the geomagnetic equator are responsible for the observed enhancements of Z- and whistler-mode waves. While the comparison between linear growth-rate calculations and observations shows the different tendency of wave amplitude of Z-mode and whistler-mode waves, the wave amplitude of these wave modes in the simulation results is consistent with the observation.     

Li isotopes and trace elements as a petrogenetic tracer in zircon: insights from Archean TTGs and sanukitoids

We report δ⁷Li, Li abundance ([Li]), and other trace elements measured by ion probe in igneous zircons from TTG (tonalite, trondhjemite, and granodiorite) and sanukitoid plutons from the Superior Province (Canada) in order to characterize Li in zircons from typical Archean continental crust. These data are compared with detrital zircons from the Jack Hills (Western Australia) with U–Pb ages greater than 3.9 Ga for which parent rock type is not known. Most of the TTG and sanukitoid zircon domains preserve typical igneous REE patterns and CL zoning. [Li] ranges from 0.5 to 79 ppm, typical of [Li] in continental zircons. Atomic ratios of (Y + REE)/(Li + P) average 1.0 ± 0.7 (2SD) for zircons with magmatic composition preserved, supporting the hypothesis that Li is interstitial and charge compensates substitution of trivalent cations. This substitution results in a relatively slow rate of Li diffusion. The δ⁷Li and trace element data constrain the genesis of TTGs and sanukitoids. [Li] in zircons from granitoids is significantly higher than from zircons in primitive magmas in oceanic crust. TTG zircons have δ⁷Li (3 ± 8‰) and δ¹⁸O in the range of primitive mantle-derived magmas. Sanukitoid zircons have average δ⁷Li (7 ± 8‰) and δ¹⁸O higher than those of TTGs supporting genesis by melting of fluid-metasomatized mantle wedge. The Li systematics in sanukitoid and TTG zircons indicate that high [Li] in pre-3.9-Ga Jack Hills detrital zircons is a primary igneous composition and suggests the growth in proto-continental crust in magmas similar to Archean granitoids.     

PSDF: Particle Stream Data Format for N-body simulations

We present a data format for the output of general N-body simulations, allowing the presence of individual time steps. By specifying a standard, different N-body integrators and different visualization and analysis programs can all share the simulation data, independent of the type of programs used to produce the data. Our Particle Stream Data Format, PSDF, is specified in YAML, based on the same approach as XML but with a simpler syntax. Together with a specification of PSDF, we provide background and motivation, as well as specific examples in a variety of computer languages. We also offer a web site from which these examples can be retrieved, in order to make it easy to augment existing codes in order to give them the option to produce PSDF output.     

Migration of protoplanets: Effects on terrestrial planet formation

I review the role of planetary migration on the formation process of terrestrial planets. I first show a simple estimation for growth timescale of solid proto-planets and review a linear theory of disk-planet gravitational interaction to estimate the migration rate of proto-planets in a gas disk, and then discuss the difficulty of the formation of terrestrial planets in terms of comparison between migration timescale and growth timescale. Next I show recent studies which suggest possible mechanisms to solve the problem. I briefly discuss the formation process of Mercury in the context of terrestrial-planet formation.     

Coastal polynyas off East Queen Maud Land observed from NOAA AVHRR data

Coastal polynyas off East Queen Maud Land in Antarctica are examined using NOAA AVHRR infrared data. From image analyses, two locations of coastal polynyas in this region are identified; one in Breid Bay and the other along the shelf break. The areal coverage of the Breid Bay polynya is significantly related to the strength of katabatic winds, which maintain their strength over the coastal sea due to land topography favoring for their confluence, thereby being capable of removing newly formed ice. Land fast ice in the eastern part of the bay also plays an additional role in the formation mechanism. It is also found that the areal coverage of coastal polynyas in this region fluctuate coherently. Moreover, these fluctuations correspond to the synoptic index, which measures the strength of the offshore wind, with their peaks closely associated with the areal peaks. These facts strongly suggest the influence of synoptic scale weather on the formation and maintenance of polynyas in this region.