Crystallization processes in an artificial magma: variations in crystal shape,growth rate and composition with melt cooling history

A large (4.8 m³, 1.3x10⁷ g) artificial mafic melt with a bulk composition similar to that of a basalt (but with a high CaO content of 17 wt%) was generated during a demonstration of in situ vitrification and was allowed to cool naturally. During the melting process, convection was vigorous, resulting in a chemically and thermally homogeneous melt body. Once heating was complete, the cooling rate was rapid with the temperature dropping from 1500°C to 500°C in 6 days within the interior of the 3 m diameter, 1.5 m thick body. A 20 h period of constant temperature (1140°C) observed during colling was the result of latent heat released by widespread crystallization. The final crystalline assemblage consists of diopsidic to hedenbergitic pyroxene and anorthitic feldspar, with a subordinate amount of potassic feldspar, plus a small amount of evolved glass. The compositions and proportions of phases agree well with those predicted by the MELTS thermodynamic model. Thermal and textural evidence suggest that convection within the melt ceased coincident with formation of the first crystals. Textural investigation of core samples reveals large (up to 1 cm in length) acicular diopsidic pyroxenes in a matrix of smaller feldspar and zoned pyroxene crystals (500 m in length). Crystal shape and pyroxene composition vary as a function of position within the solidified body, as a function of cooling rate. Both crystal size and degree of crystallinity are highest in the central, most slowly-cooled parts of the rock. Crystal shape is characterized by tabular, equilibrium-growth forms in the slowly-cooled areas, grading to highly skeletal, dendritic forms at the rapidly-cooled edges of the body. The pyroxene crystals are dominantly homogeneous diopside, but crystals are characterized by thin Fe-rich hedenbergitic rims. These rims were deposited when Mg in the melt was depleted by diopside growth, and melt temperature had cooled sufficiently to allow Fe-rich pyroxene growth. Crystal growth rates can be calculated based on thermal behavior of the melt, reinforced by thermodynamic modelling, and are determined to be between 10^-7 and 10^-8 cm/s in the central part of the melt. These estimates agree well with growth rates in natural systems with similar cooling rates. Pyroxene crystals that formed at a higher cooling rates are characterized by higher Al and lower Mg contents relative to tabular equilibrium crystalline forms, presumably as a result of disequilibrium melt compositions at the crystal-melt interface.New Mexico Bureau of Mines and Mineral Resources, New Mexico Institute of Mining and Technology, Socorro, NM 87801, USA     

合肥遥测台网地震速报系统

论述了适用于遥测地震台网大震速报的一套计算机处理系统,系统设计以《全国遥测台网观测技术规范》和《近震分析》理论为依据,实现了数据输入,震相选择,数据处理,地震定位,震级计算,结果输出及贮存等多项功能,达到了快速确定地震三要素,提高速报速度和精度之目的,是一个较完善的,实用的速报系统。     

Geochemical Evidence for Subduction Fluxes, Mantle Melting and Fractional Crystallization Beneath the South Sandwich Island Arc

The volcanoes of the South Sandwich island arc follow threedistinct series: low-K tholeiitic (followed by Zavodovski, Candlemas,Vindication, Montagu and Bristol), tholeiitic (followed by Visokoi,Saunders and Bellinghausen) and calcalkaline (followed by Leskov,Freehand and part of Cook and Thule). Flux calculations indicatethat the percentage contribution of the subduction componentto the mantle source of all three series varies from undetectable(e.g. Zr) through small (e.g. Nd=20%) and moderate (e.g. La,Ce, Sr=50–80%) to dominant (e.g. Pb, K, Ba, Rb, Cs >90%)with little change along the arc. Isotope systematics (Pb, Nd,Sr) show that this subduction component obtains a greater contributionfrom altered oceanic crust than from pelagic sediment. Elementsfor which the subduction contribution is small show that themantle is already depleted relative to N-MORB mantle (equivalentto loss of an 2•5% melt fraction) before melting beneaththe arc. After addition of the subduction component, dynamicmelting of this depleted mantle then causes the variations inK that distinguish the three series. The estimated degree ofpartial melting (20%) is slightly greater than that beneathocean ridges, though geothermometry suggests that the primarymagma temperature (1225C) is similar to that of primary MORB.About half of the melting may be attributed to volatile addition,and half to decompression. Dynamic melting involving three-dimensional,two-phase flow may be needed to explain fully the inter-islandvariations. KEY WORDS: geochemistry; petrology; fluxes; melting; subduction ^*Corresponding author     

Powder- and single crystal Mössbauer spectroscopy on synthetic fayalite

Mössbauer measurements on synthetic iron orthosilicate Fe₂SiO₄ (fayalite) were carried out in the antiferromagnetic spin state below T _N 65 K. The Mössbauer parameters isomer shift , inner magnetic field H(0), angle between H(0) and the z-component of the electric field gradient (efg), quadrupole splitting QS and asymmetry parameter were determined as a function of temperature. These parameters could be attributed to the two crystallographic sites M1 and M2.The smaller isomer shift on M1 with respect to M2 displays the more covalent character of the Fe-O bond on M1, which is supported by previous neutron diffraction experiments. H(0) shows a Brillouin-type behaviour with different fields on the two crystallographic sites (stronger on M1) and a small discontinuity at T = 23 K which corresponds with previous magnetic measurements. The quadrupole splitting is equal on both sites within error bars, in agreement with previous theoretical results and in contradiction to previous Mössbauer refinements published elsewhere.     

Role of dykes in induced seismicity at Bhatsa reservoir,Maharashtra, India

The geological and hydrological conditions near the reservoir site play an important role in the generation or absence of seismic activity. Near Bhatsa reservoir, along the west coast of India intense seismic activity occurred during August–September 1983, after a lag of six years of initial impounding. From July 1983 to September 1990, 15,388 earthquakes (mostlyM ₁<3.0) were recorded, the largest being of magnitude 4.9. The spatial distribution of well located 172 earthquakes suggest a strong correlation between the epicenters and the disposition of dykes and faults around the Bhatsa region. It is inferred that these dykes have acted as barriers for the diffusion of water from the reservoir, thereby becoming zones of instability due to increased pore pressure not only along them but also over the volume they bound.     

A search for ultra-high energy counterparts to gamma-ray bursts

A small air shower array operating over many years has been used to search for ultra-high energy (UHE) gamma radiation ( 50 TeV) associated with gamma-ray bursts (GRBs) detected by the BATSE instrument on the Compton Gamma-Ray Observatory (CGRO). Upper limits for a one minute interval after each burst are presented for seven GRBs located with zenith angles < 20°. A 4.3 excess over background was observed between 10 and 20 minutes following the onset of a GRB on 11 May 1991. The confidence level that this is due to a real effect and not a background fluctuation is 99.8%. If this effect is real then cosmological models are excluded for this burst because of absorption of UHE gamma rays by the intergalactic radiation fields.     

Room temperature solid-state detectors for Gamma ray burst spectroscopy

We have evaluated several solid state detectors which offer excellent energy resolution at room temperature for soft X-rays. For soft X-rays (< 1 keV to 20 keV), silicon P-intrinsic-N (PIN) and avalanche-mode photodiodes (APD's) have been studied. Using commercially available charge sensitive pre-amplifiers, these photodiodes provide 1 keV resolution without cooling. Their detection efficiencies are limited to about 20 keV and 15 keV, respectively. To overcome this constraint, we have studied thick (1.5 mm) PIN detectors made by Micron Semiconductor Ltd., U.K., as well as compound semiconducting materials with high Z constituents such as CZT and PbI₂. PbI₂ allows high detection efficiencies of photons up to 100 keV with detectors 100–300 microns thick. These new detectors offer the capability to study the low-energy spectral evolution of Gamma ray bursts (GRBs). A matrix of these detectors could be used as an image plane detector with moderate spatial resolution for imaging.     

Cosmological models in certain scalar-tensor theories

Exact solutions of Einstein field equations are obtained in the scalar-tensor theories developed by Saez and Ballester (1985) and Lau and Prokhovnik (1986) when the line-element has the form $$ds^2 = \exp \left( {2h} \right)dt^2 - \exp \left( {2A} \right)\left( {dx^2 + dy^2 } \right) - \exp \left( {2B} \right)dz^2 $$ whereh, A andB are functions oft only. The solutions are spatially homogeneous, locally rotationally symmetric and admit a Bianchi I group of motions on hypersurfacest = constant. The dynamical behaviours of these models have also been discussed.     

Interferometric observations of HCN and CN towards carbon stars

Using the IRAM interferometer we have observed four carbon stars (U Cam, CIT6, Y CVn, IRC+40540) in the HCN(J=1 0) and CN(N=1 0) lines. Here we present some results for CIT6 and U Cam.     

The Mauritius Radiotelescope

The Mauritius Radiotelescope (MRT) is a T-shaped array of helical antennas with a 2048 m EW arm and a 890 m South arm. The primary objective of the telescope is to produce a sky survey in the declination zone -15° to -65° with a point source sensitivity of 200 mJy and an angular resolution of 4'×4.6'cosec(z) at 151.6 MHz, z being the zenith angle . This paper describes the telescope and the present status