淮安五河口特大桥大口径灌注桩施工实践

介绍了使用大口径钻机，采用泥浆护壁气举反循环回转钻进工艺、进行淮安市五河口特大桥大口径灌注桩施工的工程实践。通过不断提高施工技术措施，摸索与总结出一套成孔施工经验，顺利地完成了施工任务。     

山西交城断裂交城县城段的位置及其与地裂缝的关系研究

山西交城断裂为太原盆地西界的主控边界断裂,断裂带附近历史上曾发生过6级地震.野外调查发现,沿交城断裂发现多处地裂缝.在交城县城北侧的坡底村-田家山村西一带地裂缝断续出露,裂缝与基岩隆起区与盆地倾斜平原的分界线的距离大约为200 m.     

大功率激电测深法寻找焦家式深部金矿床的试验应用研究

利用大功率的激电测深法可以寻找焦家式深部金 矿。首先,由物理和数学推导建立多层极化体的数 理模型,其数理模型产生的极化场可由多层若干 个极化单元场相叠加而成。由多次去除极化单元 场的原理而导出大功率激电测深资料进行消除浅 部强激电干扰异常的数据处理公式,从而突出了 深部矿床的激电异常。并利用处理后的激电测深 曲线,定量求取了深部金矿蚀变矿化带的顶界面 埋深。     

基于二维小波变换的FMI图象分割

为了从FMI资料中定量提取参数，一个重要的步骤是从实际FMI资料中分离出反映溶孔、溶洞、裂缝的子图像。本文给出的方法，考虑图像像元邻域的特征，应用二维小波变换求出目标与背景边缘的点集，按这个边缘点集的坐标点所对应的原图像像素灰度值的平均值作为分割阈值进行图像分割。实际资料处理表明，应用这种方法可以从实际的FMI资料中准确地分割出孔洞、裂缝的子图像并且可以按深度段连续自动处理，为后续定量计算参数奠定了良好基础。     

青西油田碳酸盐岩裂缝性储层地球物理预测技术的应用

白云岩成岩收缩晶间孔、洞、缝与构造网状缝相互沟通可以组成良好的油气储层，但是这种复杂裂缝—孔隙型储层分布随机性强、发育程度和差异性大，储层预测难度大。本文以中国西部酒泉盆地青西油田下白垩统下沟组湖相白云岩裂缝—孔隙型储层为例，提出地球物理综合预测碳酸盐岩裂缝的方法。本文描述了综合地球物理方法预测碳酸盐岩裂缝储层的实施和应用效果。     

储层岩石电性特征的逾渗网络模型研究(英文)

建立能够反映储层孔隙结构、流体特征的逾 渗网络模型,通过数值模拟研究了储层孔隙尺寸、 孔隙形状、连通性、微孔隙的发育状况等对I-Sw曲 线影响的定性规律,研究了地层水矿化度对岩石电 阻率的影响。分析讨论了不同因素对电阻率影响的 相对强度。最后,通过曲线拟合定量地研究了不同 因素对I-Sw曲线的影响规律。研究表明,在上述影 响因素中连通性和微孔隙对I-Sw曲线的影响很大, 其它因素的影响强度较小。地层水矿化度对岩石电 阻率绝对值的影响很大。“非阿尔奇”现象普遍存在, 在低渗透(低连通性)储层岩石中更为明显。     

Thermodynamic conditions of framework grain dissolution of clastic rocks and its application in Kela 2 gas field

Feldspar and clastic debris are the most important constituent framework grains of sedimentary clastic rocks and their chemical dissolution plays an essential role in the formation and evolution of the secondary pore in the reservoir rocks. On the basis of thermodynamic phase equilibrium, this study investigates the chemical equilibrium relationships between fluid and various plagioclase and K-feldspar in diagenesis of the sediments, particularly, the impact of temperature and fluid compositions (pH, activity of K+, Na+, Ca2+ and so on) on precipitation and dissolution equilibria of feldspars. Feldspar is extremely easily dissolved in the acid pore water with a low salinity when temperature decreases. The dissolution of anorthite end-member of plagioclase is related to the Ca content of the mineral and the fluid, higher Ca either in the mineral or in the fluid, easier dissolution of the feldspar. Moreover, the dissolution of albite end-member of plagioclase is related to Na of both the mineral and fluid,     

鄂尔多斯盆地南部的黄土塬区地震资料处理与解释,第一部分:地震资料处理

Branching river channels and the coexistence of valleys, ridges, hiils, and slopes＇as the result of long-term weathering and erosion form the unique loess topography. The Changqing Geophysical Company, working in these complex conditions, has established a suite of technologies for high-fidelity processing and fine interpretation of seismic data. This article introduces the processes involved in the data processing and interpretation and illustrates the results.     

Converted-wave seismology in anisotropic media revisited,Part I: Basic theory

We have developed new basic theories for calculating the conversion point and the travel time of the P-SV converted wave (C-wave) in anisotropic, inhomogeneous media. This enables the use of conventional procedures such as semblance analysis, Dix-type model building and Kirchhoff summation, to implement anisotropic processing, and makes anisotropic processing affordable. Here we present these new developments in two parts: basic theory and application to velocity analysis and parameter estimation. This part deals with the basic theory, including both conversion-point calculation and moveout analysis. Existing equations for calculating the PS-wave (C-wave) conversion point in layered media with vertical transverse isotropy (VTI) are strictly limited to offsets about half the reflector depth (an offset-depth ratio, xlz, of 0.5), and those for calculating the C-wave traveltimes are limited to offsets equal to the reflector depth (x/z=l.0). In contrast, the new equations for calculating the conversion-point extend into offsets about three-times the reflector depth (x/z=3.0), those for calculating the C-wave traveltimes extend into offsets twice the reflector depth (x/z=2.0). With the improved accuracy, the equations can help in C-wave data processing and parameter estimation in anisotropic, inhomogeneous media. This work is funded by the Edinburgh Anisotropy Project (EAP) of the British Geological Survey. First author: Xiangyang Li, Mr. Li is currently a professorial research seismologist (Grade 6) and technical director of the Edinburgh Anisotropy Project in the British Geological Survey. He also holds a honorary professorship in multicomponent seismology at the School of Geosciences, University of Edinburgh. He received his BSc(1982) in Geophysics from Changchun Geological Institute, China, an MSc (1984) in applied geophysics from East China Petroleum Institute (now known as the China University of Petroleum), and a PhD (1992) in seismology from the University of Edinburgh. During 1984–1987, he worked as a lecturer with the East China Petroleum Institute. Since 1991, he has been employed by the British Geological Survey. His research interests include seismic anisotropy and multicomponent seismology.     

Assessing the Comparability of Ammonium,Nitrate and Sulfate Concentrations Measured by Three Air Quality Monitoring Networks

Airborne fine particulate matter across the United States is monitored by different networks, the three prevalent ones presently being the Clean Air Status and Trend Network (CASTNet), the Interagency Monitoring of PROtected Visual Environment Network (IMPROVE) and the Speciation and Trend Network (STN). If combined, these three networks provide speciated fine particulate data at several hundred locations throughout the United States. Yet, differences in sampling protocols and samples handling may not allow their joint use. With these concerns in mind, the objective of this study is to assess the spatial and temporal comparability of the sulfate, nitrate and ammonium concentrations reported by each of these networks. One of the major differences between networks is the sampling frequency they adopted. While CASTNet measures pollution levels on seven-day integrated samples, STN and IMPROVE data pertain to 24-hour samples collected every three days. STN and IMPROVE data therefore exhibit considerably more short-term variability than their CASTNet counterpart. We show that, despite their apparent incongruity, averaging the data with a window size of four to six weeks is sufficient to remove the effects of differences in sampling frequency and duration and allow meaningful comparison of the signals reported by the three networks of concern. After averaging, all the sulfate and, to a lesser degree, ammonium concentrations reported are fairly similar. Nitrate concentrations, on the other hand, are still divergent. We speculate that this divergence originates from the different types of filters used to collect particulate nitrate. Finally, using a rotated principal component technique (RPCA), we determined the number and the geographical organization of the significant temporal modes of variation (clusters) detected by each network for the three pollutants of interest. For sulfate and ammonium, the clusters’ geographical boundaries established for each network and the modes of variations within each cluster seem to correspond. RPCA erformed on nitrate concentrations revealed that, for the CASTNet and IMPROVE networks, the modes of variation do not correspond to unified geographical regions but are found more sporadically. For STN, the clustered areas are unified and easily delineable. We conclude that the possibility of jointly using the data collected by CASTNet, IMPROVE and STN has to be weighed pollutant by pollutant. While sulfate and ammonium data show some potential for joint use, at this point, combining the nitrate data from these monitoring networks may not be a judicious choice.