乌鲁木齐市华凌拟建地下停车场活断层探测与城市活断层探测手段适用性初步分析

根据在乌鲁木齐市拟建华凌地下停车场活断层探测与地震危险性评价工作，对通过乌鲁木齐闹市区的雅玛里克断裂进行了实验性探测。采用了浅层地震探测、地质雷达探测、地形测量和坑探剖面方法，对这些手段的适用性进行了初步分析和讨论。     

睡莲类植物ITS nrDNA序列的分子系统发育分析

睡莲类植物是目前植物分子系统学与进化研究的一个重要类群。核基因组的ITS区是核核糖体（nrDNA)转录单位的一部分。测定和分析了5个属的7种睡莲类植物的核核糖体ITS序列，并与GenBank中提取的相关序列进行了组合分析，初步获得了睡莲类植物的2个ITS系统树，结果也支持现有分子系统学研究中有关金鱼藻处于较原始位置的观点。     

平流层-对流层交换研究进展

平流层与对流层之间的物质输送和混合（STE）是控制自然和人为排放的化学痕量物质对大气成分影响的一个重要过程。STE可以影响温室气体在上对流层和下平流层中的垂直分布，进而影响气候。要预报全球气候变化就必须了解平流层与对流层之间动力、化学及辐射的耦合。从 STE研究的尺度问题，热带和中纬度地区STE研究以及我国STE研究现状进行了评述。STE具有多种尺度和形式，热带外平流层由波强迫驱动的全球尺度环流，可以诊断长时间尺度的STE，它不能充分描述短时间尺度过程。热带外低平流层环流不能简单地描述为纬向平均，要正确描述痕量气体的分布必须包含纬向非对称的天气尺度过程。热带地区的滴漏管理论提供了一个新的诊断 STE框架。目前对中纬度地区对流层顶折叠和切断低压的研究是比较充分的。     

金矿测年方法讨论及定年中存在的问题

准确的成岩成矿年代测定是矿床研究和对比的基础。然而近几年来 ,不同的研究者对同一矿床采用不同的定年方法得出了相差十分悬殊的成岩成矿年龄的报道屡见不鲜。为此笔者在分析了不同定年方法适用性的同时 ,强调了在金矿定年中要加强对金矿成岩成矿地质背景的研究 ,重视不同地质体与成矿的先后关系 ,确定标志性地质体 ,选择合适的定年方法 ,测定标志性地质体和矿体的成岩成矿年代 ,使成岩成矿年代互为限定 ,得到高质量的年代学数据。     

柯坪塔格推覆构造几何学、运动学及其构造演化

大量野外构造地质调查和深部构造解释表明柯坪塔格推覆构造由多组倒转复式背斜、复式箱状背斜构成的推覆体及其前缘逆冲断裂组成 ,由寒武系—第四系组成的推覆体由北向南逆—斜冲 ,平面上构成向南凸出的弧形推覆构造 ;普昌断裂由各不相连的逆冲斜冲断裂段组成 ,而不是完整的一条走滑断层 ,各推覆体前缘逆冲断裂与各推覆体的普昌断裂段共同构成统一的前缘逆冲斜冲逆冲断裂和推覆构造系统 ;普昌断裂段以西的推覆体具有向东抬升、向西倾覆的鼻状构造特征 ,普昌断裂段以东的推覆体具有向西抬升、向东倾覆的鼻状构造特征 ,普昌基底隆起带是巴楚隆起隐伏在柯坪塔格推覆构造之下的部分。各推覆体前缘断裂在深部均归并于统一的寒武系底部的滑脱面 ,其南浅北深 ,东浅西深 (普昌隆起带以西 )或西浅东深 (普昌隆起带以东 ) (6 10km ) ,埋深较大区发育多组滑脱面。柯坪塔格推覆构造的形成时期为晚第四纪 ,为现今活动的推覆构造系统。文中认为各推覆体向南西的倾覆端基底滑脱面和中新生界内部的滑脱面没有贯通 ,是未来 6级以上地震的发震构造部位。     

Introduction of structural aseismic research in China in recent four years

Introduction Greeting the coming of the 21st century, Professor HU Yu-xian and other Chinese scholars briefed the trend of earthquake engineering in China and aboard (HU, 1999; HU, ZHOU, 1999). The experiences and lessons learning from the destructive earthquakes in China and abroad in re-cent years, the damage action of the large velocity impulse in ground motion in near field in seis-mic design, numerous earthquake examples show that there are many weaknesses in aspects of earthquake p…     

Synthesis of zeolites using fly ash and their application in removing heavy metals from waters

Fly ash is the solid waste of thermal power plants where coal is used as fuel, and its management and utilization have been of environmental concern for decades. Since the technique of synthesizing zeolite from coal fly ash was introduced by Holler[1] (19…     

Extracting flow structures from tracer data

A method of visualizing structures in closed chaotic flows out of homogenous particle distributions is presented in the example of models of a meandering jet. To this end, the system will be leaked or opened up by defining a region of the flow, so that a particle is considered to be escaped if it leaves this region. By applying this method to an ensemble of nonescaped tracers, we are able to characterize mixing processes by visualizing the converging and stretching filamentations (stable and unstable manifolds) in the flow without using additional mathematical tools. The possibility of applying the algorithm to analyze buoy data, and a comparison with the finite time manifolds are discussed.     

Contemporary crustal deformation of the Chinese continent and tectonic block model

We obtain the preliminary result of crustal deformation velocity field for the Chinese continent by analyzing GPS data from the Crustal Motion Observation Network of China (CMONOC), particularly the data from the regional networks of CMONOC observed in 1999 and 2001. We delineate 9 technically active blocks and 2 broadly distributed deformation zones out of a dense GPS velocity field, and derive block motion Euler poles for the blocks and their relative motion rates. Our result reveals that there are 3 categories of deformation patterns in the Chinese continent. The first category, associated with the interior of the Tibetan Plateau and the Tianshan orogenic belt, shows broadly distributed deformation within the regions. The third category, associated with the Tarim Basin and the region east of the north-south seismic belt of China, shows block-like motion, with deformation accommodated along the block boundaries only. The second category, mainly associated with the borderland of the Tibetan Plateau, such as the Qaidam, Qilian, Xining (in eastern Qinghai), and the Diamond-shaped (in western Sichuan and Yunnan) blocks, has the deformation pattern between the first and the third, i.e. these regions appear to deform block-like, but with smaller sizes and less strength for the blocks. Based on the analysis of the lithospheric structures and the deformation patterns of the regions above, we come to the inference that the deformation modes of the Chinese continental crust are mainly controlled by the crustal structure. The crust of the eastern China and the Tarim Basin is mechanically strong, and its deformation takes the form of relative motion between rigid blocks. On the other hand, the northward indentation of the Indian plate into the Asia continent has created the uplift of the Tibetan Plateau and the Tianshan Mountains, thickened their crust, and raised the temperature in the crust. The lower crust thus has become ductile, evidenced in low seismic velocity and high electric conductivity observed. The brittle part of the crust, driven by the visco-plastic flow of the lower crust, deforms extensively at all scales. The regions of the second category located at the borderland of the Tibetan Plateau are at the transition zone between the regions of the first and the third categories in terms of the crustal structure. Driven by the lateral boundary forces, their deformation style is also between the two, in the form of block motion and deformation with smaller blocks and less internal strength.