Aquifer Storage Recovery (ASR) of chlorinated municipal drinking water in a confined aquifer

About 1.02 × 10⁶ m³ of chlorinated municipal drinking water was injected into a confined aquifer, 94–137 m below Roseville, California, between December 2005 and April 2006. The water was stored in the aquifer for 438 days, and 2.64 × 10⁶ m³ of water were extracted between July 2007 and February 2008. On the basis of Cl⁻ data, 35% of the injected water was recovered and 65% of the injected water and associated disinfection by-products (DBPs) remained in the aquifer at the end of extraction. About 46.3 kg of total trihalomethanes (TTHM) entered the aquifer with the injected water and 37.6 kg of TTHM were extracted. As much as 44 kg of TTHMs remained in the aquifer at the end of extraction because of incomplete recovery of injected water and formation of THMs within the aquifer by reactions with free-chlorine in the injected water. Well-bore velocity log data collected from the Aquifer Storage Recovery (ASR) well show as much as 60% of the injected water entered the aquifer through a 9 m thick, high-permeability layer within the confined aquifer near the top of the screened interval. Model simulations of ground-water flow near the ASR well indicate that (1) aquifer heterogeneity allowed injected water to move rapidly through the aquifer to nearby monitoring wells, (2) aquifer heterogeneity caused injected water to move further than expected assuming uniform aquifer properties, and (3) physical clogging of high-permeability layers is the probable cause for the observed change in the distribution of borehole flow. Aquifer heterogeneity also enhanced mixing of native anoxic ground water with oxic injected water, promoting removal of THMs primarily through sorption. A 3 to 4-fold reduction in TTHM concentrations was observed in the furthest monitoring well 427 m downgradient from the ASR well, and similar magnitude reductions were observed in depth-dependent water samples collected from the upper part of the screened interval in the ASR well near the end of the extraction phase. Haloacetic acids (HAAs) were completely sorbed or degraded within 10 months of injection.     

Coal mining‐derived ochres in the UK: a potential selenium trap

Thanks to the pioneering research of Paul Younger over the past 20 years, acid mine drainage in the UK has been recognized as a major environmental issue. Acid mine drainage and hydrous ferric oxide deposition are environmental hazards resulting from centuries of extensive coal mining activities across the UK. Oxidative weathering of pyrite in coal from spoil heaps and exposed bedrock can liberate trace elements, releasing them into local water systems. In addition to posing an environmental threat through water and ground contamination, ochres can also act as a remediation material, trapping elements such as selenium. Trace elements with a close association to iron oxides, such as selenium, may fix to the fine‐grained ochre materials, resulting in hyper‐enriched ochres. Selenium in coals has been known to cause an environmental issue in areas of North America but is also an important commodity for solar cells and nanotechnologies. Coal‐bearing areas of the UK, such as Northumberland, are known to contain a high selenium content, and coal‐derived ochres in these regions also contain significant selenium. The widespread occurrence of ochres in UK coal‐mining regions may therefore present a unique ‘E tech’ trace element source and prevent a toxicity problem for which they were once thought to be responsible.     

Tumbi Landslide, Papua New Guinea: rainfall induced?

On 24 January 2012, a fatal landslide with an estimated volume of 3 Mm³ hit villagers and infrastructure in the Tagali Valley, Southern Highlands Province, Papua New Guinea (PNG). Although a moderate event by PNG standards, the associated human casualties and infrastructure destruction give a human as well as a scientific need to review the potential causes for the event. PNG experiences numerous landslides annually, most of which are trigged either by rainfall events or seismic activity. Here, we review the short-term rainfall patterns leading up to the slope failure at Tumbi Quarry and compare the rainfall accumulations obtained over durations of 30, 60 and 90 days prior to the landslide, with comparable rainfall accumulations obtained for other failures observed in PNG over a 12-year period. Additionally, a review of long-term rainfall over a period of 6 months prior to the failure is completed as well as an assessment of seismic activity. Based on our analysis, we believe a seismic trigger to be very unlikely, while the increase in rainfall in the 2 weeks prior to the failure in conjunction with a high-intensity rainfall event at the end of October 2011 could have had a greater influence in enhancing rather than restraining slope failure. This, in addition to natural denudational processes, geological structure and the anthropogenic activity in the vicinity of the landslide, could all have served to affect slope stability.     

Efficiency of kriging estimation for square, triangular, and hexagonal grids

Although several researchers have pointed out some advantages and disadvantages of various soil sampling designs in the presence of spatial autocorrelation, a more detailed study is presented herein which examines the geometrical relationship of three sampling designs, namely the square, the equilateral triangle, and the regular hexagon. Both advantages and disadvantages exist in the use of these designs with respect to estimation of the semivariogram and their effect on the mean square error or variance of error. This research could be used to design optimal sampling strategies; it is based on the theory of regionalized variables, in which the intrinsic hypothesis is satisfied. Among alternative designs, an equilateral triangle design gives the most reliable estimate of the semivariogram. It also gives the minimum maximum mean square error of point estimation of the concentration over the other two designs for the same number of measurements when the nugget effect is small relative to the variance. If the nugget effect is large (.90 ² or more), and the linear sampling density is >0.85r where r is the range, the hexagonal design is best. This study computes and compares the maximum mean square error for each of these designs.     

Determining the trophic guilds of fishes and macroinvertebrates in a seagrass food web

We established trophic guilds of macroinvertebrate and fish taxa using correspondence analysis and a hierarchical clustering strategy for a seagrass food web in winter in the northeastern Gulf of Mexico. To create the diet matrix, we characterized the trophic linkages of macroinvertebrate and fish taxa present inHalodule wrightii seagrass habitat areas within the St. Marks National Wildlife Refuge (Florida) using binary data, combining dietary links obtained from relevant literature for macroinvertebrates with stomach analysis of common fishes collected during January and February of 1994. Heirarchical average-linkage cluster analysis of the 73 taxa of fishes and macroinvertebrates in the diet matrix yielded 14 clusters with diet similarity ≥ 0.60. We then used correspondence analysis with three factors to jointly plot the coordinates of the consumers (identified by cluster membership) and of the 33 food sources. Correspondence analysis served as a visualization tool for assigning each taxon to one of eight trophic guilds: herbivores, detritivores, suspension feeders, omnivores, molluscivores, meiobenthos consumers, macrobenthos consumers and piscivores. These trophic groups, corss-classified with major taxonomic groups, were further used to develop consumer compartments in a network analysis model of carbon flow in this seagrass ecosystem. The method presented here should greatly improve the development of future network models of food webs by providing an objective procedure for aggregating trophic groups.     

Nickel, Copper, Zinc and Cadmium Cycling with Manganese in Lake Vanda (Wright Valley, Antarctica)

Lake Vanda is a closed-basin, permanently ice-covered lake located in the Wright Valley of Antarctica. The lakes more important geochemical features include the fact that it is fed by a single glacial melt water stream for only 6–8weeks out of the year; that it has remained stratified for more than a millennium; and that, like other lakes in the region, it is remote from anthropogenic influence. These, together with the fact that it is among the least biologically productive lakes in the world, make it an ideal system for examining the transport, cycling and fate of trace metals in the aquatic environment. Like others before us, we view this lake as a natural geochemical laboratory, a flask in the desert. This paper presents the first set of closely spaced, vertical, profiles for dissolved and particulate Mn, Fe, Ni, Cu, Zn and Cd in the water column. Despite the absence of an outflow, metals in the fresh upper waters of the lake have extremely low concentrations, in the pico-molar to nano-molar range, and are partitioned largely into dissolved rather than particulate phases. Efficient metal scavenging by particles from these oxygen-rich waters is indicated. Significant increases in metal concentrations begin to appear at depth, between 57 and 60m, and these increases coincide with the onset of manganese oxide dissolution in oxic, but lower pH waters. Vertical profiles suggest that the entire suite of trace metals (Ni, Cu, Zn, and Cd) is being released from manganese oxide carrier phases. Thermodynamic analysis indicates that Mn3O4 (i.e., the mineral hausmannite) may be important in metal sequestration and recycling in the deeper waters of Lake Vanda. Manganese-reducing organisms reported by Bratina etal. (1998) are active in the zone of metal release and these could also contribute to the observed cycling.     

Nouvelle interprétation structurale de la « faille Nord- Pyrénéenne » en vallée d'Aspe (Pyrénées-Atlantiques). Remise en question d'un plutonisme ophitique danien dans le secteur de Bedous

In the Aspe Valley (western Pyrenees), the Europe/Iberia boundary corresponds to a complex fracturing zone, called the ‘Bielle–Accous Wrench-Faulting Corridor’, which represents the classical ‘North-Pyrenean Fault’. Located between the High Primary Range and the North-Pyrenean Zone, the BAWC shows different south-verging sheets mainly composed of Triassic materials. The Bedous ophite, associated with Muschelkalk and Keuper sediments, is also Triassic in age and involved in the same Pyrenean thrusting structures. So, contrary to a recent interpretation, this magmatic rock cannot be related to a supposed Danian plutonism inducing metamorphic processes in the surrounding Mesozoic formations. To cite this article: J. Canérot et al., C. R. Geoscience 336 (2004).     

A high-resolution TEM-AEM, pH titration, and modeling study of Zn coprecipitation with ferrihydrite

Experiments of Zn²⁺ and Fe³⁺ coprecipitation as a function of pH were conducted in the laboratory at ambient temperature and pressure. X-ray diffraction patterns of the coprecipitates show two broad peaks at 0.149 and 0.258 nm, which is consistent with published patterns for pure 2-line ferrihydrite. Zn²⁺ uptake occurred at pH ≥5 while Fe³⁺ precipitation occurred between pH 3 and 4, although both Zn²⁺ and Fe³⁺ were present in the same solution during the entire range of pH titration. High-resolution transmission electron microscopy shows that the coprecipitates are 2 to 6 nm sized single crystalline particles but aggregated to 50 to 400 nm sized clusters. Analytical electron microscopy indicated that the 5% atomic Zn with respect to Fe was homogeneously distributed. No segregated phases were found in the clusters or at single crystal edges, which is consistent with published extended X-ray absorption fine structure (EXAFS) results at similar Zn/(Zn + Fe) ratios. Hence, occlusion and surface precipitation may be excluded as possible coprecipitation mechanisms. The bulk solution Zn²⁺ sorption edge was fitted to both solid solution and generalized diffuse layer surface complexation models. However, a solid solution model is inconsistent with published EXAFS results that show tetrahedral polydentate Zn²⁺ complexes sharing apices with Fe³⁺octahedra.     

Characteristic analysis—1981: Final program and a possible discovery

The latest or n ewest version of the char acteristic an alysis (NCHARAN)computer program offers the exploration geologist a wide variety of options for integrating regionalized multivariate data. The options include the selection of regional cells for characterizing deposit models, the selection of variables that constitute the models, and the choice of logical combinations of variables that best represent these models. Moreover, the program provides for the display of results which, in turn, makes possible review, reselection, and refinement of a model. Most important, the performance of the above-mentioned steps in an interactive computing mode can result in a timely and meaningful interpretation of the data available to the exploration geologist. The most recent application of characteristic analysis has resulted in the possible discovery of economic sulfide mineralization in the Grong area in central Norway. Exploration data for 27 geophysical, geological, and geochemical variables were used to construct a mineralized and a lithogeochemical model for an area that contained a known massive sulfide deposit. The models were applied to exploration data collected from the Gjersvik area in the Grong mining district and resulted in the identification of two localities of possible mineralization. Detailed field examination revealed the presence of a sulfide vein system and a partially inverted stratigraphic sequence indicating the possible presence of a massive sulfide deposit at depth.     

Geochemistry and petrogenesis of the Proterozoic dykes in Tamil nadu, southern India: another example of the Archaean lithospheric mantle source

Approximately 1650-Ma-old NW/SE and NE/SW-trending dolerite dykes in the Tiruvannamalai (TNM) area and approximately 1800-Ma-old NW/SE-trending dolerite dykes in the Dharmapuri (DP) area constitute major Proterozoic dyke swarms in the high-grade granulite region of Tamil nadu, southern India. The NW- and NE-trending TNM dykes are compositionally very similar and can be regarded as having been formed during a single magmatic episode. The DP dykes may relate to an earlier similar magmatic episode. The dolerites are Fe-rich tholeiites and most of the elemental variations can be explained in terms of fractional crystallisation. Clinopyroxene and olivine are the inferred ferromagnesian fractionation phases followed by plagioclase during the late fractionation stages. All the studied dykes have, similar to many continental flood basalts (CFB), large-ion lithophile element (LILE) and light rare-earth element (LREE) enrichment and Nb and Ta depletion. The incompatible element abundance patterns are comparable to the patterns of many other Proterozoic dykes in India and Antarctica, to the late Archaean (～2.72 Ga) Dominion volcanics in South Africa and to the early Proterozoic (～2.0 Ga) Scourie dykes of Scotland. The geochemical characteristics of the TNM and DP dykes cannot be explained by crustal contamination alone. Instead, they are consistent with derivation from an enriched lithospheric mantle source which appears to have been developed much earlier than the dyke intrusions during a major crustal building event in the Archaean. The dyke magmas may have been formed by dehydration melting induced by decompression and lithospheric attenuation or plume impingement at the base of the lithosphere. These magmas, compared with CFB, appear to be the minor partial melts from plume heads of smaller diameter and of shallow origin (650 km). Therefore, the Proterozoic thermal events could induce crustal attenuation and dyke intrusions in contrast to the extensive CFB volcanism and continental rifting generally associated with the Phanerozoic plumes of larger head diameter (>1000 km) and of deeper origin (at crust mantle boundary).