Modeling monthly mean air temperature for Brazil

Air temperature is one of the main weather variables influencing agriculture around the world. Its availability, however, is a concern, mainly in Brazil where the weather stations are more concentrated on the coastal regions of the country. Therefore, the present study had as an objective to develop models for estimating monthly and annual mean air temperature for the Brazilian territory using multiple regression and geographic information system techniques. Temperature data from 2,400 stations distributed across the Brazilian territory were used, 1,800 to develop the equations and 600 for validating them, as well as their geographical coordinates and altitude as independent variables for the models. A total of 39 models were developed, relating the dependent variables maximum, mean, and minimum air temperatures (monthly and annual) to the independent variables latitude, longitude, altitude, and their combinations. All regression models were statistically significant (α?≤?0.01). The monthly and annual temperature models presented determination coefficients between 0.54 and 0.96. We obtained an overall spatial correlation higher than 0.9 between the models proposed and the 16 major models already published for some Brazilian regions, considering a total of 3.67?×?10⁸?pixels evaluated. Our national temperature models are recommended to predict air temperature in all Brazilian territories.     

The impacts of a plume-rise scheme on earth system modeling: climatological effects of biomass aerosols on the surface temperature and energy budget of South America

Theoretical and Applied Climatology - Seasonal forest fires in the Amazon are the largest source of pollutants in South America. The impacts of aerosols due to biomass burning on the temperature...     

A New Method for Determining Compound Specific Carbon Isotope of Chlorinated Solvents in Porewater

A new method for the extraction of chlorinated solvents (CSs) from porewater with dimethylacetamide (DMA) used as a solvent and the determination of δ¹³C by gas chromatography-isotope ratio mass spectrometry (GC-IRMS) with solid-phase microextraction (SPME) are presented. This method was used for the determination of δ¹³C of chloroethenes and chloromethanes. The extraction of the CSs from porewater with DMA led to a minimal loss of mass of solvent and chlorinated compounds. The accuracy of the method was verified with the analysis of the pure injected compounds using elemental analyzer—isotope ratio mass spectrometry (EA-IRMS). It has been effectively applied in a study area in saturated soil samples of a pollutant source zone of perchloroethylene (PCE) and trichloroethylene (TCE). The limit of quantification of the new method was 0.034 μg/g for PCE and TCE for 10–20 g of soil sample. This new method allows for compound-specific isotope analysis of CSs in porewater, which can be beneficial in sites where the identification of contamination sources and the behavior of the contaminants are not clear.     

Paleoflood events recorded by speleothems in caves

Speleothems are usually composed of thin layers of calcite (or aragonite). However, cemented detrital materials interlayered between laminae of speleothemic carbonate have been also observed in many caves. Flowstones comprising discontinuous carbonate layers form due to flowing water films, while flood events introduce fluviokarstic sediments in caves that, on occasion, are recorded as clayey layers inside flowstones and stalagmites. This record provides a potential means of understanding the frequency of palaeofloods using cave records. In this work, we investigate the origin of this type of detrital deposit in El Soplao Cave (Northern Spain). The age of the lowest aragonite layer of a flowstone reveals that the earliest flood period occurred before 500 ka, though most of the flowstone formed between 422 +69/‐43 ka and 400 +66/‐42 ka. This suggests that the cave was periodically affected by palaeoflood events that introduced detrital sediments from the surface as a result of occasional extreme rainfall events, especially at around 400 ka. The mineralogical data enable an evolutionary model for this flowstone to be generated based on the alternation of flood events with laminar flows and carbonate layers precipitation that can be extrapolated to other caves in which detrital sediments inside speleothems have been found. Copyright © 2014 John Wiley & Sons, Ltd.     

Occurrence and Resistance of Pathogenic Bacteria Along the Tietê River Downstream of São Paulo in Brazil

The load of pathogenic bacteria, their fate and their dangerousness in the Tietê River were assessed along 100 km starting from the city of São Paulo, Brazil. The data were compared with those from two German rivers. High loads of pathogens were found in the Tietê River near the city of São Paulo (Escherichia coli O157:H7, Shigella flexneri, and Shigella boydii), which were absent 30 km downstream of São Paulo. The antibiotic resistances observed in the Tietê river were rather low and decreased after the major input in São Paulo to significantly lower levels about 30 km downstream. While the Brazilian isolates were more susceptible for ampicillin than the German ones, the reverse was observed for gentamycin. For optimal control of infections in humans critical areas where these bacteria survived longer and their elimination mechanisms should be identified as well as the extent and the origin of antibiotic resistance should be determined.     

On the Acoustic-Electromagnetic Analogy for the Reflection-Refraction Problem

The same mathematical theory can be used to describe physical phenomena of different nature. For instance, the wave equation and the related mathematical developments can be used to describe elastic and electromagnetic wave propagation, and it is also extensively used in quantum mechanics. Fresnel's equations are a classical example of the analogy between shear waves and light waves. George Green in the nineteenth century, used analogies to obtain the reflection coefficients for sound waves and light waves, before the advent of the electromagnetic theory of light.In this work, we investigate the mathematical analogy between elastic waves and electromagentic waves. We obtain a complete parallelism for the reflection and refraction problem, considering the most general situation, that is, the presence of anisotropy and attenuation—viscosity in the elastic case and conductivity in the electromagnetic case. The analogy is illustrated with Fresnel's equations, the Brewster and critical angles, the concept of reflectivity and transmissivity, and the corresponding duals fields. The analysis of the elastic-solid theory of reflection applied by Green to light waves, and a brief historical review of wave propagation through the ether, further illustrate the analogy.     

Adsorption of cobalt by using inorganic components of sediment samples from water bodies

The adsorption of cobalt ions was evaluated using sediment samples from water bodies to investigate the adsorption properties of sediment and the behavior of these natural materials in the presence of nuclear and industrial waste.The two sediments(S1 and S2)were treated to eliminate humic and fulvic acids and then they were characterized by several techniques.The minerals found in both the sediments(X-ray diffraction)were quartz and albite;plus,goethite and muscovite in S1,and kaolinite and montmorillonite in S2.Point of zero charge(PZC)of S1 and S2 was 6.00 and 5.22,respectively.The specific area of S1(63.3 m²/g)is higher than S2(1.5 m²/g).Adsorption kinetics data for S1 and S2 were best fitted to the pseudo second-order model.The removal efficiency of S1 for cobalt was 96%with an adsorption capacity(qe)of 0.93 mg/g,and for S2 was 45%with a qeof 0.40 mg/g.The experimental data of the adsorption isotherms were adjusted to Langmuir and Freundlich models for S1 and S2,respectively.The thermodynamic parameters(enthalpy,entropy,and Gibb’s free energy)indicated that the adsorption processes were endothermic,spontaneous,and chemisorption mechanism.The results show that the adsorption capacities of the sediments depend on their composition.These water sediments have important adsorption properties for cobalt,and they can be used in the treatment of nuclear and industrial aqueous wastes.     

Scale-dependent correlations between soil heavy metals and As around four coal-fired power plants of northern Greece

We analyse the concentration of five trace elements (As, Cu, Ni, Pb and Zn) in the topsoil of the Kozani-Ptolemais basin where four coal-fired power plants run to provide almost 47.8 % of electricity requirements in Greece. We assume that if the power plants have altered the spatial (co)variation of the analysed elements through their toxic by-products, their effect would be observable only on a small spatial scale, since deposition of airborne pollutants is more evident if it is near the emission source. We used Factorial Cokriging to estimate the small-scale correlations among soil elements and to compare them to large spatial-scale correlations. Soil samples were collected from 92 sites. Given the low concentrations in soil heavy metals and As, we observed no serious soil contamination risk. We estimated correlations among the analysed elements on two spatial scales. On the larger scale, Ni and As exhibited higher correlation and received higher weights for the first regionalized factor, contrary to Cu, Pb and Zn which weighted more for the second regionalized factor. On the small spatial scale As associated with neither Ni nor other heavy metals. We conclude that soil arsenic has been altered by enrichment caused by some power plants through fly ash deposition and/or disposal. However, enrichment of soil elements was detectable only on the smaller spatial scale because anthropogenic inputs in soil through airborne emissions and subsequent deposition are evident only in the vicinity of the emission source.