Log‐jams and avulsions in the San Antonio River Delta,Texas

The San Antonio River Delta (SARD), Texas, has experienced two major avulsions in the past 80 years, and a number of other historical and Holocene channel shifts. The causes and consequences of these avulsions – one of which is ongoing – were examined using a combination of fieldwork, geographic information system (GIS) analysis, and historical information to identify active, semi‐active, and paleochannels and the sequence of shifting flow paths through the delta. The role of deposition patterns and antecedent morphology, large woody debris jams, and tectonic influences were given special attention. Sedimentation in the SARD is exacerbated by tectonic effects. Channel aggradation is ubiquitous, and superelevation of the channel bed above the level of backswamp areas on the floodplain is common. This creates ideal setup conditions for avulsions, and stable, cohesive fine‐grained banks favor avulsions rather than lateral migration. Flood basins between the alluvial ridges associated with the aggraded channels exist, but avulsions occur by re‐occupation of former channels found within or connected to the flood basins. Large woody debris and channel‐blocking log‐jams are common, and sometimes displace flow from the channel, triggering crevasses. However, a large, recurring log‐jam at the site of the ongoing avulsion from the San Antonio River into Elm Bayou is not responsible for the channel shift. Rather, narrow, laterally stable channels resulting from flow splits lead to accumulation of wood. Some aspects of the SARD avulsion regime are typical of other deltas, while others are more novel. These includes avulsions involving tributaries and subchannels within the delta as well as from the dominant channel; tectonic influences on delta backstepping and on channel changes within the delta; avulsions as an indirect trigger for log‐jam formation (as well as vice‐versa); and maintenance of a multi‐channel flow pattern distinct from classic anastamosing or distributary systems. Copyright © 2012 John Wiley & Sons, Ltd.     

Vent temperature trends at the Vulcano Fossa fumarole field: the role of permeability

Between 1994 and 2010, we completed 16 thermal surveys of Vulcano’s Fossa fumarole field (Aeolian Islands, Italy). In each survey, between 400 and 1,200 vent temperatures were collected using a thermal infrared thermometer from distances of ～1?m. The results show a general decrease in average vent temperature during 1994–2003, with the average for the entire field falling from ～220°C in 1994 to ～150°C by 2003. However, between 2004 and 2010, we witnessed heating, with the average increasing to ～190°C by 2010. Alongside these annual-scale field-wide trends, we record a spatial re-organisation of the fumarole field, characterised by shut down of vent zones towards the crater floor, matched by rejuvenation of zones located towards the crater rim. Heating may be expected to be associated with deflation because increased amounts of vaporisation will remove volume from the hydrothermal system Gambino and Guglielmino (J Geophys Res 113:B07402, 2008). However, over the 2004–2010 heating period, no ground deformation was observed. Instead, the number of seismic events increased from a typical rate of 37 events per month during 1994–2000 to 195 events per month during 2004–2010. As part of this increase, we noticed a much greater number of high-frequency events associated with rock fracturing. We thus suggest that the heating event of 2004–2010 was the result of changed permeability conditions, rather than change in the heat supply from the deeper magmatic source. Within this scenario, cooling causes shut down of lower sectors and re-establishment of pathways located towards the crater rim, causing fracturing, increased seismicity and heat flow in these regions. This is consistent with the zone of rejuvenation (which lies towards and at the rim) being the most favourable location for fracturing given the stress field of the Fossa cone Sch?pa et al. (J Volcanol Geotherm Res 203:133–145, 2011); it is also the most established zone, having been active at least since the early twentieth century. Our data show the value of deploying multi-disciplinary geophysical campaigns at degassing (fumarolic) hydrothermal systems. This allows more complete and constrained understanding of the true heat loss dynamics of the system. In the case study presented here, it allows us to distinguish true heating from apparent heating phases. While the former are triggered from the bottom-up, i.e. they are driven by increases in heat supply from the magmatic source, the latter are triggered from the top-down, i.e. by changing permeability conditions in the uppermost portion of the system to allow more efficient heat flow over zones predisposed to fracturing.     

Species loss in the brown world: are heterotrophic systems inherently stable?

Determining the effects of species loss on ecosystems has received considerable attention given the current threats many ecosystems are facing. A significant body of research has yielded many insights to this question, but this work has been limited by a focus on ecosystems where primary production plays a significant role in energy transfer. As many ecosystems rely on energy sources that are not derived from in situ production, there is a need to better understand how species loss will affect ecosystems of varying trophic states. To examine the effects of species loss on an ecosystem that is not reliant on in situ primary production, we manipulated the larval amphibian community of temporary forest ponds. These ponds are heterotrophic systems that rely on allochthonous inputs of detritus as a basal energy source. The larvae of two amphibian species that are prone to local extinction, wood frogs (Lithobates sylvatica) and spotted salamanders (Ambystoma maculatum), were removed from ponds and net ecosystem production was monitored. We found no effects of the removal of these top consumers on ecosystem functioning or on lower trophic groups (i.e., zooplankton, algae, bacteria). While amphibians can influence food web dynamics in other systems, their influence on system processes in temporary forest ponds appears to be limited. We hypothesize that the lack of any effects is due to the microbial degradation of detritus ??swamping?? the system, providing more than enough energy to maintain the food web, and/or due to omnivory dampening species interactions. These data indicate that the functioning of heterotrophic systems may be inherently stable due to internal dynamics that minimize interaction strengths among trophic groups.     

Short-term and seasonal variation in metabolic balance in Liverpool Bay

Regions of freshwater influence (ROFIs) are dynamic areas within the coastal seas that experience cycles of stability driven by density gradients and the spring-neap tidal cycle. As a result, pulses of biological production may occur on a more frequent timescale than the classic seasonal cycle. Net community production (NCP) rates and chlorophyll a concentration are presented from a site within the ROFI of Liverpool Bay and compared to similar measurements made at a site outside the ROFI during 2009. The influence of water column stability on biological production in the ROFI was also investigated using high-frequency observations from a Cefas Smartbuoy. Both sites were autotrophic from spring to autumn before becoming heterotrophic over winter. NCP at the inshore site was estimated to range from 30.8 to 50.4 gC m⁻² year⁻¹. A linear relationship detected between chlorophyll a and NCP from both sites was used to estimate metabolic balance over 1 year at the ROFI site using high-resolution chlorophyll a concentrations from the Smartbuoy but was found to poorly replicate NCP rates compared to those derived from dissolved oxygen fluxes. There was no clear biological response to periods of stratification within the ROFI, and it is proposed that changes in light attenuation in the Liverpool Bay ROFI, driven not only by stratification but also by fluctuations in riverine sediment load, most likely play an important role in controlling phytoplankton growth in this region.     

High‐frequency water quality monitoring in an urban catchment: hydrochemical dynamics,primary production and implications for the Water Framework Directive

This paper describes the hydrochemistry of a lowland, urbanised river‐system, The Cut in England, using in situ sub‐daily sampling. The Cut receives effluent discharges from four major sewage treatment works serving around 190 000 people. These discharges consist largely of treated water, originally abstracted from the River Thames and returned via the water supply network, substantially increasing the natural flow. The hourly water quality data were supplemented by weekly manual sampling with laboratory analysis to check the hourly data and measure further determinands. Mean phosphorus and nitrate concentrations were very high, breaching standards set by EU legislation. Although 56% of the catchment area is agricultural, the hydrochemical dynamics were significantly impacted by effluent discharges which accounted for approximately 50% of the annual P catchment input loads and, on average, 59% of river flow at the monitoring point. Diurnal dissolved oxygen data demonstrated high in‐stream productivity. From a comparison of high frequency and conventional monitoring data, it is inferred that much of the primary production was dominated by benthic algae, largely diatoms. Despite the high productivity and nutrient concentrations, the river water did not become anoxic, and major phytoplankton blooms were not observed. The strong diurnal and annual variation observed showed that assessments of water quality made under the Water Framework Directive (WFD) are sensitive to the time and season of sampling. It is recommended that specific sampling time windows be specified for each determinand, and that WFD targets should be applied in combination to help identify periods of greatest ecological risk. © 2015 The Authors. Hydrological Processes published by John Wiley & Sons Ltd.     

Trend analyses with river sediment rating curves

Sediment rating curves, which are fitted relationships between river discharge (Q) and suspended‐sediment concentration (C), are commonly used to assess patterns and trends in river water quality. In many of these studies, it is assumed that rating curves have a power‐law form (i.e. C = aQ^b, where a and b are fitted parameters). Two fundamental questions about the utility of these techniques are assessed in this paper: (i) how well to the parameters, a and b, characterize trends in the data, and (ii) are trends in rating curves diagnostic of changes to river water or sediment discharge? As noted in previous research, the offset parameter, a, is not an independent variable for most rivers but rather strongly dependent on b and Q. Here, it is shown that a is a poor metric for trends in the vertical offset of a rating curve, and a new parameter, â, as determined by the discharge‐normalized power function [C = â (Q/Q_GM)^b], where Q_GM is the geometric mean of the Q‐values sampled, provides a better characterization of trends. However, these techniques must be applied carefully, because curvature in the relationship between log(Q) and log(C), which exists for many rivers, can produce false trends in â and b. Also, it is shown that trends in â and b are not uniquely diagnostic of river water or sediment supply conditions. For example, an increase in â can be caused by an increase in sediment supply, a decrease in water supply or a combination of these conditions. Large changes in water and sediment supplies can occur without any change in the parameters, â and b. Thus, trend analyses using sediment rating curves must include additional assessments of the time‐dependent rates and trends of river water, sediment concentrations and sediment discharge. Published 2014. This article is a U.S. Government work and is in the public domain in the USA. Hydrological Processes published by John Wiley & Sons Ltd.     

Coastal erosion vs man-made protective structures: evaluating a two-decade history from southeastern India

Remote sensing images of AD 1991–2011 and field observations help evaluate shoreline changes (erosion and accretion) in Puducherry and Tamil Nadu states of southeastern India. A minor harbor was constructed during AD 1986–1989 in the coast of Puducherry, and it initiated the gradual process of shoreline modification. In the subsequent years, beaches located toward the north of the harbor suffered erosion (?0.12–?4.19 m/year) and there was accretion (0.27–7.25 m/year) in the southern beaches. However, the man-made structures (seawall and groin) have reduced the shoreline changes after AD 2004. In the last two decades, the rate of erosion area-wise gradually decreased (0.24–0.013 km²/year) and accretion remained constant (0.019 km²/year). Our results suggest that accretion happened in the southern side of the breakwaters and erosion occurred in the northern part. Presence of groins structures in the region in the northern part has also provoked accretion in the south and erosion in the northern side close to the State of Tamil Nadu.

     

Geochemistry, Geochronology and Lu-Hf Isotopes of Peraluminous Granitic Porphyry from the Walegen Au Deposit, West Qinling Terrane

Walegen Au deposit is closely correlated with granitic intrusions of Triassic age, which are composed of granite and quartz porphyries. Both granite porphyry and quartz porphyry consist of quartz, feldspar and muscovite as primary minerals. Weakly peraluminous granite porphyry(A/CNK=1.10–1.15) is enriched in LREE, depleted in HREE with Nb-Ta-Ti anomalies, and displays subduction-related geochemistry. Quartz porphyry is strongly peraluminous(A/CNK=1.64–2.81) with highly evolved components, characterized by lower TiO_2, REE contents, Mg~#, K/Rb, Nb/Ta, Zr/Hf ratios and higher Rb/Sr ratios than the granite porphyry. REE patterns of quartz porphyry exhibit lanthanide tetrad effect, resulting from mineral fractionation or participation of fluids with enriched F and Cl. LAICP-MS zircon U-Pb dating indicates quartz porphyry formed at 233±3 Ma. The ages of relict zircons from Triassic magmatic rocks match well with the detrital zircons from regional area. In addition, ε_(Hf)(t) values of Triassic magmatic zircons from the granite and quartz porphyries are -14.2 to -9.1(with an exception of +4.1) and -10.8 to -8.6 respectively, indicating a crustal-dominant source. Regionally, numerous Middle Triassic granitoids were previously reported to be formed under the consumption of Paleotethyan Ocean. These facts indicate that the granitic porphyries from Walegen Au deposit may have been formed in the processes of the closing of Paleotethyan Ocean, which could correlate with the arc-related magmatism in the Kunlun orogen to the west and the Qinling orogen to the east.     

Politicians and geomorphological blunders. Some examples relating to rivers and coasts from Queensland,Australia

Editors' Note: The following is the eighth in the Singapore Journal of Tropical Geography Lecture Series. It is based on the plenary presentation of 10 July at the 7th International Conference on Geomorphology held in Melbourne in 2009. Geomorphologists have an important role to not just understand and interpret the nature of processes operating within the physical landscape, but also to communicate this information to those who can use it to benefit society. Policy makers and legislators often develop documents relating to the management and use of landforms and landscapes that contain little or no input from geomorphologists, which can and do have undesirable consequences for governments, communities and the natural environment. Examples relating to rivers and coasts from Queensland, Australia highlight inadequacies in policies and legislation because of a lack of input from geomorphologists. In one instance the definition of a stream channel has been reinterpreted by the legal system because of a poorly developed definition within the legislation. The outcome is a legal definition of a stream channel based on the Q3 month flow (3‐month average recurrence interval discharge or flow). In another instance, people and property are being placed at risk from coastal erosion and impact from tropical cyclone generated marine inundations (waves and surge) because a lack of understanding of geomorphic processes operating along the coast has been inscribed into policies and legislation. These are examples from one region but similar situations will exist elsewhere globally. Both politicians and geomorphologists have a role to communicate better with each other about these matters. Geomorphologists in particular need to be more proactive in advising politicians on issues in which they have expertise.     

A discontinuous finite element baroclinic marine model on unstructured prismatic meshes

We describe the time discretization of a three-dimensional baroclinic finite element model for the hydrostatic Boussinesq equations based upon a discontinuous Galerkin finite element method. On one hand, the time marching algorithm is based on an efficient mode splitting. To ensure compatibility between the barotropic and baroclinic modes in the splitting algorithm, we introduce Lagrange multipliers in the discrete formulation. On the other hand, the use of implicit–explicit Runge–Kutta methods enables us to treat stiff linear operators implicitly, while the rest of the nonlinear dynamics is treated explicitly. By way of illustration, the time evolution of the flow over a tall isolated seamount on the sphere is simulated. The seamount height is 90% of the mean sea depth. Vortex shedding and Taylor caps are observed. The simulation compares well with results published by other authors.