Minimizing structural vibrations with absorbers

In a companion paper¹ the authors show that the parameters of an absorber which will minimize the resonant response of a simple elastic body can be determined from known results by treating the body as an equivalent single degree-of-freedom system. In this paper cylindrical shells are considered as examples of dynamically complex structures, for which the ratio of the natural frequencies of adjacent modes tends towards unity. It is shown that as dynamic complexity increases optimum absorber parameters for the reduction of resonant response deviate increasingly from those for an equivalent single degree-of-freedom system. Absorbers can be used also to reduce the random response of structures. Simple expressions for optimum parameters are given for an undamped main system, which has one degree of freedom and is subjected to white noise excitation. Optimum absorber parameters for beams, plates and cylindrical shells show similar qualitative behaviour for random and harmonic response with the concept of an equivalent single degree-of-freedom system being applicable only for the simpler structures.     

Sorption–Desorption Transformation of the Runoff of Dissolved Microelements at River–Sea Geochemical Barrier (Based on Data of Experimental Laboratory Simulation)

Water Resources - A new method was used for experimental simulation of the sorption–desorption transformation of microelement composition of the adsorbed complex of solid substances of river...     

On Geoseismic Noise and Helioseismic Oscillations

Izvestiya, Physics of the Solid Earth - Abstract—In their paper published in Izvestiya, Physics of the Solid Earth, G.A. Sobolev et al. (2020) discussed the results of their study. Firstly,...     

Solar limb darkening in the wings of the CaII H and K lines

The method for measuring solar limb darkening has been proposed, and the formulas, describing the law of solar limb darkening in the wings of the CaII H (396.849 nm) and K (393.369 nm) lines, have been derived. To operate at arbitrary points on the Sun’s surface, it is necessary to know the law of solar limb darkening, which is specific in different spectral regions. The procedure of spectrum correction for a flat field, proposed in our previous works, is based on comparing line-free spectral regions with the solar center reference spectrum from the atlas by Brault and Neckel [1994].     

Data reporting norms for 40Ar/39Ar geochronology

Data reported in ⁴⁰Ar/³⁹Ar geochronology studies are commonly insufficient to allow computation of ages. This deficiency renders it difficult to compare ages based on different standards or constants, and often hinders critical evaluation of the results. Herein are presented an enumeration of the data that should be reported in all ⁴⁰Ar/³⁹Ar studies, including a discussion in support of these requirements. The minimum required data are identified and distinguished from parameters that are useful but may be derived from them by calculation. Finally, recommendations are made for metadata needed to document age calculations (e.g., from age spectrum or isochron analyses).     

Petrology and geochronology of basalt breccia from the 1996 earthquake swarm of Loihi seamount, Hawaii: magmatic history of its 1996 eruption

 Samples of basalt were collected during the Rapid Response cruise to Loihi seamount from a breccia that was probably created by the July to August 1996 Loihi earthquake swarm, the largest swarm ever recorded from a Hawaiian volcano. ²¹⁰Po–²¹⁰Pb dating of two fresh lava blocks from this breccia indicates that they were erupted during the first half of 1996, making this the first documented historical eruption of Loihi. Sonobuoys deployed during the August 1996 cruise recorded popping noises north of the breccia site, indicating that the eruption may have been continuing during the swarm. All of the breccia lava fragments are tholeiitic, like the vast majority of Loihi's most recent lavas. Reverse zoning at the rim of clinopyroxene phenocrysts, and the presence of two chemically distinct olivine phenocryst populations, indicate that the magma for the lavas was mixed just prior to eruption. The trace element geochemistry of these lavas indicates there has been a reversal in Loihi's temporal geochemical trend. Although the new Loihi lavas are similar isotopically and geochemically to recent Kilauea lavas and the mantle conduits for these two volcanoes appear to converge at depth, distinct trace element ratios for their recent lavas preclude common parental magmas for these two active volcanoes. The mineralogy of Loihi's recent tholeiitic lavas signify that they crystallized at moderate depths (∼8–9 km) within the volcano, which is approximately 1 km below the hypocenters for earthquakes from the 1996 swarm. Taken together, the petrological and seismic evidence indicates that Loihi's current magma chamber is considerably deeper than the shallow magma chamber (∼3–4 km) in the adjoining active shield volcanoes. Received: 21 August 1997 / Accepted: 15 February 1998     

Truncation of the distribution of ground-motion residuals

Recent studies to assess very long-term seismic hazard in the USA and in Europe have highlighted the importance of the upper tail of the ground-motion distribution at the very low annual frequencies of exceedance required by these projects. In particular, the use of an unbounded lognormal distribution to represent the aleatory variability of ground motions leads to very high and potentially unphysical estimates of the expected level of shaking. Current practice in seismic hazard analysis consists of truncating the ground-motion distribution at a fixed number (ε _max) of standard deviations (σ). However, there is a general lack of consensus regarding the truncation level to adopt. This paper investigates whether a physical basis for choosing ε _max can be found, by examining records with large positive residuals from the dataset used to derive one of the ground-motion models of the Next Generation Attenuation (NGA) project. In particular, interpretations of the selected records in terms of causative physical mechanisms are reviewed. This leads to the conclusion that even in well-documented cases, it is not possible to establish a robust correlation between specific physical mechanisms and large values of the residuals, and thus obtain direct physical constraints on ε _max. Alternative approaches based on absolute levels of ground motion and numerical simulations are discussed. However, the choice of ε _max is likely to remain a matter of judgment for the foreseeable future, in view of the large epistemic uncertainties associated with these alternatives. Additional issues arise from the coupling between ε _max and σ, which causes the truncation level in terms of absolute ground motion to be dependent on the predictive equation used. Furthermore, the absolute truncation level implied by ε _max will also be affected if σ is reduced significantly. These factors contribute to rendering a truncation scheme based on a single ε _max value impractical.     

Precise Relative Location of 25-ton Chemical Explosions at Balapan Using IMS Stations

—?We test how well low-magnitude (m _bLg 1.8 to 2.6), 25-ton chemical explosions at Balapan, Kazakhstan, can be located using IMS stations and standard earth models, relying on precisely determined relative arrival times of nearly similar, regional and teleseismic waveforms. Three 1997 Balapan explosions were recorded by a number of currently reporting and surrogate IMS stations. Three regional stations and two teleseismic arrays yielded consistent waveforms appropriate for relative picking. Master-event locations based on the AK135 model and ground-truth information from the first, shallowest and best-recorded explosion, fell under 1 km from known locations, for depths constrained to that of the master event. The resulting 90% confidence ellipses covered 12–13?km² and contained the true locations; however, results for depth constrained to true depth were slightly less satisf actory. From predictions based on ground truth, we found a P _g -coda phase at Makanchi, Kazakhstan to be misidentified and poorly modeled. After accounting for this, 90% ellipses shrank to 2–3?km² and true-depth mislocation vectors became more consistent with confidence-ellipse orientations. These results suggest that a high level of precision could be provided by a tripartite array of calibration shots in cases where models are poorly known. We hope that the successful relocation of these small Balapan shots will support the role of calibration explosions in verification monitoring and special event studies, including on-site inspection.     

Fluvial process and the establishment of bottomland trees

The effects of river regulation on bottomland tree communities in western North America have generated substantial concern because of the important habitat and aesthetic values of these communities. Consideration of such effects in water management decisions has been hampered by the apparent variability of responses of bottomland tree communities to flow alteration. When the relation between streamflow and tree establishment is placed in a geomorphic context, however, much of that variability is explained, and prediction of changes in the tree community is improved.The relation between streamflow and establishment of bottomland trees is conditioned by the dominant fluvial process or processes acting along a stream. For successful establishment, cottonwoods, poplars, and willows require bare, moist surfaces protected from disturbance. Channel narrowing, channel meandering, and flood deposition promote different spatial and temporal patterns of establishment. During channel narrowing, the site requirements are met on portions of the bed abandoned by the stream, and establishment is associated with a period of low flow lasting one to several years. During channel meandering, the requirements are met on point bars following moderate or higher peak flows. Following flood deposition, the requirements are met on flood deposits ;high above the channel bed. Flood deposition can occur along most streams, but where a channel is constrained by a narrow valley, this process may be the only mechanism that can produce a bare, moist surface high enough to be safe from future disturbance. Because of differences in local bedrock, tributary influence, or geologic history, two nearby reaches of the same stream may be dominated by different fluvial processes and have different spatial and temporal patterns of trees. We illustrate this phenomenon with examples from forests of plains cottonwood (Populus deltoides ssp. monilifera) along meandering and constrained reaches of the Missouri River in Montana.