Multidimensional statistical technique for detection of low contrast geochemical anomalies

In this article we propose an advanced technique for detecting low contrast geochemical anomalies using a set of features. There are three principal elements in this technique: (1) a statistical measure of the contrast of the anomaly, denoted as τ; (2) selection of a background population; and (3) reduction of the dimensionality of the feature space. In the frame of the model, which describes the statistical distribution of geochemical background as a multidimensional normal distribution of logarithms of concentrations, the index, τ, is a powerful test statistic for the hypothesis of abnormality of an observation. Maps of τ anomalies can be rigorously interpreted on the basis of statistical inferences. Under all equal conditions this technique allows the detection of geochemical anomalies with at least the same contrast (if the chemical elements in a background population are correlated, then even the better) as using selective extractions of metals from soil or other techniques for data processing. The advantages of the proposed technique are demonstrated both theoretically and on examples of rare-metal and copper–nickel mineral deposits.     

New fusulinids of the Moscovian Stage found in Iran

The described fusulinids of the Moscovian Stage are found in the Asad-Abad section of the Sanandaj-Sirjan tectonic zone of Iran. Five successive fusulinid assemblages are distinguished. Three lower of them belong to the Kashirian Substage, the other two to the Podolskian Substage. The section studied is correlated with most complete sections of the Moscovian Stage in the western Tethys. Two new species Fusulinella (Moellerites) pygmea and Putrella primaris are identified; in addition to nominative taxon, the latter includes new subspecies P. primaris compacta.     

Soil/Geotextile Interface Behaviour in Direct Shear and Pullout Movements

This paper deals with soil/reinforced geotextile interface behaviour in direct shear and pullout movements. A soil/geosynthetic direct shear apparatus, developed in accordance to EN ISO 12957-1 (2004) and ASTM D5321-92 (1992) standards, is presented. Some details of the test (like: specimen fixation, influence of the vertical stress on the registered horizontal force, type of test and measurement of the vertical displacement) are discussed and modifications in the test procedures are adopted. Then, the reinforced geotextile and the residual soil of granite used in the research are described. The behaviour of soil/geosynthetic interface in direct shear is characterized based on modified direct shear tests and maximum interface shear stress is determined at peak and residual for a confining stress of 50 kPa. The modification in the pullout test apparatus described by Lopes and Ladeira (1996a; 1996b) and by Lopes and Lopes (1999) are noticed. The behaviour of soil/geosynthetic interface in pullout is characterized based on pullout tests performed, in accordance EN 13738 (2004), and interface shear stress at maximum pullout force is defined for a confining stress of 50 kPa. Finally, the values of interface coefficient at soil/geosynthetic interface are obtained in direct shear and in pullout and then compared. The main conclusions that can be outlined from the present study are the following: modifications should be made to EN ISO 12957-1 (2004) standard, namely in what concerns the dependence of the measured horizontal force from the vertical stress, the difficulties to perform constant area direct shear test with the lower half box filled with soil and on the measurement of the vertical displacement of the load plate; on the contrary to which is normally accepted the characteristics of the behaviour of soil/geosynthetic interface in pullout, when the geosynthetic has a full plane contact area with the soil, are not able to be obtained based on results of direct shear tests, as in this type of tests the contribution of the geosynthetic deformation on the characteristics of the interface in pullout is not considered.     

Hydrologic factors controlling groundwater salinity in northwestern coastal zone,Egypt

The aim of this article is to assess the main factors influencing salinity of groundwater in the coastal area between El Dabaa and Sidi Barani, Egypt. The types and ages of the main aquifers in this area are the fractured limestone of Middle Miocene, the calcareous sandstone of Pliocene and the Oolitic Limestone of Pleistocene age. The aquifers in the area are recharged by seasonal rainfall of the order of 150 mm/year. The relationship of groundwater salinity against the absolute water level, the well drilling depth, and the ability of aquifer to recharge has been discussed in the present work. The ability of aquifer to locally recharge by direct rainfall is a measure of the vertical permeability due to lithological and structural factors that control groundwater salinity in the investigated aquifers. On the other hand, the fracturing system as well as the attitude of the surface water divide has a prime role in changing both the mode of occurrence and the salinity of groundwater in the area. Directly to the west of Matrouh, where the coastal plain is the narrowest, and east of Barrani, where the coastal plain is the widest, are good examples of this concept, where the water salinity attains its maximum and minimum limits respectively. Accordingly, well drilling in the Miocene aquifer, in the area between El Negila and Barrani to get groundwater of salinities less than 5000 mg/l is recommended in this area, at flow rate less than 10 m³/hr/well. In other words, one can expect that the brackish water is probably found where the surface water divide is far from the shore line, where the Wadi fill deposits dominate (Quaternary aquifer), acting as a possible water salinity by direct rainfall and runoff.     

Peak-Size Distributions of Proton Fluxes and Associated Soft X-Ray Flares

A database combining information about solar proton enhancements (SPEs) near the Earth and soft X-ray flares (GOES measurements) has been used for the study of different correlations through the period from 1975 to May 2006. The emphasis of this work is on the treatment of peak-size distributions of SXR flares and SPEs. The frequency of SXR flares and solar proton events (>10 and >100 MeV, respectively) for the past three solar cycles has been found to follow mainly a power-law distribution over three to five orders of magnitude of fluxes, which is physically correct beyond the “sensitivity” problem with the smallest peak values. The absence of significant spectral steepening in the domain of the highest peak values demonstrates that during the period considered, lasting 30 years, the limit of the highest flare’s energy release has not yet been achieved. The power-law exponents were found to be −2.19±0.04, −1.34±0.02, and −1.46±0.04, for the total SXR flare distribution and the total SPE distributions (for both E _P>10 MeV and E _P>100 MeV), respectively. For SPEs associated with flares located to the West of 20° W, the exponents are −1.22±0.05 (E _P>10 MeV) and −1.26±0.03 (E _P>100 MeV). The size distribution for corresponding flares follows a power law with a slope of −1.29±0.12. Thus, X-ray and proton fluxes produced in the same solar events have very similar distribution shapes. Moreover, the derived slopes are not incompatible with a linear dependence between X-ray flare power and proton fluxes near the Earth. A similar statistical relation is obtained independently from the direct comparison of the X-ray and proton fluxes. These all argue for a statistically significant relationship between X-ray and proton emissions.     

The sunlit lunar surface

Directional infrared emission from the sunlit lunar surface is determined for the thermal meridian and as a function of observer elevation and azimuth angles at three Sun elevation angles. A study of selected mare sites at full Moon suggests that brightness temperatures are relatively insensitive to changes in certain surface parameters, such as the photometric function, emissivity, and thermophysical properties of the soil. The observed deviations from predictions for an average surface can be accounted for by changes in surface roughness.Deceased 12 January, 1971.     

Evolution of continental crust of the Aravalli craton,NW India,during the Neoarchaean–Palaeoproterozoic: evidence from geochemistry of granitoids

Neoarchaean–Palaeoproterozoic granitoids of the Aravalli craton, represented by four plutons with different ages, viz. Gingla (2.6–2.4 Ga), Ahar River (2562 Ma), Untala (2505 Ma), and Berach (2440 Ma) granitoids, are classified into three suites: TTG-like, Sanukitoid, and High-K Granitoid suite, all exhibiting negative Nb and Ti anomalies. The TTG-like suite is characterized by high contents of SiO₂, Na₂O, and LREEs, high (La/Yb)_N, low contents of K₂O, MgO, Cr, and Ni, and low (Dy/Yb)_N, suggesting that this suite formed by partial melting of a subducted basaltic slab without interacting with a mantle wedge. In contrast, the calc-alkaline Sanukitoid suite is marked by a high content of LILEs and mantle-compatible elements, which indicate that this suite formed by partial melting of a slab-fluid metasomatized mantle wedge in a subduction-related arc environment. On the other hand, the High-K Granitoid suite is characterized by high contents of SiO₂ and K₂O, and low contents of Na₂O, MgO, Cr, and Ni with variable Eu anomaly, along with high (La/Sm)_N and (La/Yb)_N, and low (Dy/Yb)_N and Nb/Th. Some high-K granitoids also exhibit A-type characteristics. These features indicate that the High-K Granitoid suite formed by melting of crustal rocks. Early Neoarchaean continental crust formation reflected a slab-melting-dominated magmatic process as evidenced by the TTG-like suite, whereas Palaeoproterozoic petrogenesis was governed by the interaction of slab melt with mantle wedge as demonstrated by the Sanukitoid suite. The High-K Granitoid suite formed during the waning stages of subduction. This study reveals that granitic rocks of the Aravalli craton evolved from slab melting in the Neoarchaean to melting of mantle wedge in the Palaeoproterozoic. Melting of older crust led to the formation of the High-K Granitoid suite.     

STATISTICAL EVALUATION OF MT AND AMT METHODS APPLIED TO A BASALT-COVERED AREA IN SOUTHEASTERN ANATOLIA,TURKEY*

The efficacy of the magnetotelluric and audiomagnetotelluric (MT/AMT) methods for detailing the structure of a hypothetical geological section is investigated by using the singular value decomposition (SVD) technique. The section is representative of southeastern Turkey, which is mostly covered by basalt and is a prime area for oil exploration. One of the geological units, the Germav shale at a depth of 600 m, is a problem layer for electromagnetic surveys because of its very low resistivity (on average 3 Ωm) and highly variable thickness across the area (200–900 m). In the MT frequency range (0.0004–40 Hz) its total conductance—or, since its resistivity is known from resistivity log information, its thickness—is the best resolved model parameter. The total depth to the Germav shale and the resistivity of the Cambrian/Precambrian basement are the marginally resolved parameters. In the AMT frequency range (4–10000 Hz) the resistivity of the surface basalt layer strongly affects the resolution of the other, less important, model parameters which are the total depth to the Germav shale and the total conductance of the Germav shale. The errors in the measurements determine the number of model parameters resolvable, and are also important for interpretation of the geological model parameters to within a desired accuracy. It is shown that statistical evaluation of the MT and/or AMT interpretations by using an SVD factorization of the sensitivity matrix can be helpful to define the importance of some particular stage of the interpretation, and also provides a priori knowledge to plan a proposed survey. Arrangements of MT and AMT observations, together with some Schlumberger resistivity soundings, on a large grid will certainly provide three-dimensional detailed information of the deep geoelectric structure of the area.     

Normal fault growth and linkage in the Gediz (Alaşehir) Graben,Western Turkey,revealed by transient river long‐profiles and slope‐break knickpoints

The Gediz (Ala?ehir) Graben is located in the highly tectonically active and seismogenic region of Western Turkey. The rivers upstream of the normal fault‐bounded graben each contain a non‐lithologic knickpoint, including those that drain through inferred fault segment boundaries. Knickpoint heights measured vertically from the fault scale with footwall relief and documented fault throw (vertical displacement). Consequently, we deduce these knickpoints were initiated by an increase in slip rate on the basin‐bounding fault, driven by linkage of the three main fault segments of the high‐angle graben bounding fault array. Fault interaction theory and ratios of channel steepness suggest that the slip rate enhancement factor on linkage was a factor of 3. We combine this information with geomorphic and structural constraints to estimate that linkage took place between 0.6 Ma and 1 Ma. Calculated pre‐ and post‐linkage throw rates are 0.6 and 2 mm/yr respectively. Maximum knickpoint retreat rates upstream of the faults range from 4.5 to 28 mm/yr, faster than for similar catchments upstream of normal faults in the Central Apennines and the Hatay Graben of Turkey, and implying a fluvial landscape response time of 1.6 to 2.7 Myr. We explore the relative controls of drainage area and precipitation on these retreat rates, and conclude that while climate variation and fault throw rate partially explain the variations seen, lithology remains a potentially important but poorly characterised variable. Copyright © 2016 John Wiley & Sons, Ltd.