Mesoproterozoic Fraser Complex: Geochemical evidence for multiple subduction‐related sources of lower crustal rocks in the Albany‐Fraser Orogen,Western Australia

The 1300 Ma Fraser Complex in the Albany‐Fraser Orogen of Western Australia is a thrust stack of mainly gabbroic rocks metamorphosed to granulite facies. This package of fault‐bounded units was elevated from a deep crustal level onto the margin of the Yilgarn Craton during continental collision between the Mawson and Yilgarn Cratons. Incompatible trace‐element distributions demand at least three mantle sources. Primitive‐mantle‐normalised incompatible‐element distributions show strong negative Ta–Nb anomalies, typical of subduction‐derived magmas. Three lines of evidence indicate that the mafic magmas did not acquire these anomalies by assimilation of crustal rocks: (i) major‐element compositions do not allow appreciable contamination with felsic material; (ii) Ni contents of many mafic rocks are too high for a significant contribution from a felsic assimilant; and (iii) Sr and Nd isotopic data support a largely juvenile source for the magmas that produced the Fraser Complex. Hence, the Ta–Nb anomalies are interpreted to reflect subduction‐related magmatic sources. On multielement diagrams, depletions in Sr, Eu, P, and Ti can be explained by fractional crystallisation, whereas Th and Rb depletions in many of the Fraser Complex rocks probably reflect losses during granulite‐facies metamorphism. These results suggest that the lower crust in this region at 1300 Ma was dominantly of arc origin, and there is no evidence to support mantle plume components. The Fraser Complex is interpreted as remnants of oceanic arcs that were swept together and tectonically interleaved with the margin of the Mawson Craton just before, or during, collision with the Yilgarn Craton at 1300 Ma.     

High resolution facies record on late Holocene flood plain sediments from lower reaches of Narmada Valley,Western India

A high resolution quantitative granulometric record for site Uchediya [21°43′2.22″ N, 73° 6′26.22″ E; 10 m a. s. l.] gives understanding towards accretion history of the late Holocene flood plain in the lower reaches of Narmada River. Two sediment facies (sandy and muddy) and seven subfacies (sandy subfacies: St_MS+FS+CS, Sm_FS+MS, Sl_FS+VFS, and St_{MS + CS}; muddy subfacies: Fm_SILT+VFS+FS, Fm_SILT+VFS (O) and Fm_SILT+VFS (T)) are identified based on cluster analysis supplemented with sedimentary structures observed in field and other laboratory data. Changes in hydrodynamics are further deduced based on various sedimentological parameters and their ratios leading to arrive at a depositional model.     

Anisotropy beneath Hawaii from surface wave particle motion observations

Observed polarization ellipses for fundamental-mode surface waves observed at a digital station in Hawaii deviate from those expected for isotropic models of crust and mantle structure for that region. The anomalous motion occurs as rotations of the ellipse about all three axes in a cartesian corrdinate system. The largest and most consistent deviations occur as anomalous slopes of the ellipse about the horizontal axis transverse to the direction of propagation.The observed orientations and magnitudes of these angles can be explained by models of the upper mantle which contain olivine for which thea-axis dips significantly from the horizontal and which includes a sufficiently thick sedimentary layer (1 km) and a thicker than normal oceanic crust (15 km). The ellipses are also generally inclined from great circle paths about the vertical axis and are tilted about the axis aligned with the propagation direction. Both angles are small and difficult to measure, but the inclination angles are consistent with a model of the upper mantle in which thea-axis of olivine is preferentially oriented in an east-west direction.     

Sensitivity of Mesoscale Model Forecast During a Satellite Launch to Different Cumulus Parameterization Schemes in MM5

The identification of the model discrepancy and skill is crucial when a forecast is issued. The characterization of the model errors for different cumulus parameterization schemes (CPSs) provides more confidence on the model outputs and qualifies which CPSs are to be used for better forecasts. Cases of good/bad skill scores can be isolated and clustered into weather systems to identify the atmospheric structures that cause difficulties to the forecasts. The objective of this work is to study the sensitivity of weather forecast, produced using the PSU-NCAR Mesoscale Model version 5 (MM5) during the launch of an Indian satellite on 5th May, 2005, to the way in which convective processes are parameterized in the model. The real-time MM5 simulations were made for providing the weather conditions near the launch station Sriharikota (SHAR). A total of 10 simulations (each of 48 h) for the period 25th April to 04th May, 2005 over the Indian region and surrounding oceans were made using different CPSs. The 24 h and 48 h model predicted wind, temperature and moisture fields for different CPSs, namely the Kuo, Grell, Kain-Fritsch and Betts-Miller, are statistically evaluated by calculating parameters such as mean bias, root-mean-squares error (RMSE), and correlation coefficients by comparison with radiosonde observation. The performance of the different CPSs, in simulating the area of rainfall is evaluated by calculating bias scores (BSs) and equitable threat scores (ETSs). In order to compute BSs and ETSs the model predicted rainfall is compared with Tropical Rainfall Measuring Mission (TRMM) observed rainfall. It was observed that model simulated wind and temperature fields by all the CPSs are in reasonable agreement with that of radiosonde observation. The RMSE of wind speed, temperature and relative humidity do not show significant differences among the four CPSs. Temperature and relative humidity were overestimated by all the CPSs, while wind speed is underestimated, except in the upper levels. The model predicted moisture fields by all CPSs show substantial disagreement when compared with observation. Grell scheme outperforms the other CPSs in simulating wind speed, temperature and relative humidity, particularly in the upper levels, which implies that representing entrainment/detrainment in the cloud column may not necessarily be a beneficial assumption in tropical atmospheres. It is observed that MM5 overestimates the area of light precipitation, while the area of heavy precipitation is underestimated. The least predictive skill shown by Kuo for light and moderate precipitation asserts that this scheme is more suitable for larger grid scale (>30 km). In the predictive skill for the area of light precipitation the Betts-Miller scheme has a clear edge over the other CPSs. The evaluation of the MM5 model for different CPSs conducted during this study is only for a particular synoptic situation. More detailed studies however, are required to assess the forecast skill of the CPSs for different synoptic situations.     

Dynamical Initialization of Boundary-Layer Data

A procedure for the dynamic initialization of wind and temperature fields within the atmospheric boundary layer (ABL) is presented. The procedure uses transilient turbulence theory to assess the turbulent fluxes from observed wind and temperature data, which are used to estimate the eddy transfer coefficients, so enabling a local closure ABL model to be integrated forward in time to a new steady state. The method has been applied to initialize kytoon data taken at Kharagpur (22.3° N, 87.2° E) during the MONTBLEX field programme. Results of a case study for 17 June 1990 are discussed.     

Caledonian eclogite-facies metamorphism of Early Proterozoic protoliths from the North-East Greenland Eclogite Province

High-pressure metamorphic assemblages occur in mafic, ultramafic and a few intermediate rocks in a gneiss complex that covers an area of approximately 400 × 100 km in the North-East Greenland Caledonides. Detailed petrologic and geochronologic studies were carried out on three samples in order to clarify the P-T-t evolution of this eclogite province. Geothermobarometry yields temperature estimates of 700–800 °C and pressure estimates of at least 1.5 GPa from an eclogite sensu stricto and as high as 2.35 GPa for a garnet websterite. The eclogite defines a garnet-clinopyroxene-amphibole-whole rock Sm-Nd isochron age of 405 ± 24 Ma (MSWD 0.9). Isofacial garnet websterites define garnet-clinopyroxene-orthopyroxene-amphibole-whole rock-(biotite) ages of 439 ± 8 Ma (MSWD =2.1) for a coarse-grained sample and 370 ± 12 Ma (MSWD=0.6) for a finer-grained variety. Overgrowths on zircons from the fine-grained pyroxenite and the eclogite give a pooled ²⁰⁶Pb/²³⁸U SHRIMP age of 377 ± 7 Ma (n=4). Significantly younger Rb-Sr biotite ages of 357 ± 8, 330 ± 6 and 326 ± 6 agree with young Rb-Sr, K-Ar and ⁴⁰Ar/³⁹Ar mineral ages from the gneiss complex and indicate slow cooling of the eclogitic rocks. High-pressure metamorphism may have been at least 439 Ma old (Siluro-Ordovician) with cooling through amphibolite-facies conditions in the Devonian and continued crustal thinning and exhumation well into the Carboniferous. Sm-Nd whole rock model ages indicate the eclogite protoliths are Early Proterozoic in age, while ²⁰⁷Pb/²⁰⁶Pb SHRIMP ages of 1889 ± 18 and 1981 ± 8 from anhedral zircon cores probably reflect Proterozoic metasomatism. The samples have negative ɛ_Nd values (−5 to −16) and elevated ⁸⁷Sr/⁸⁶Sr ratios (0.708–0.715), consistent with field evidence that the eclogite protoliths were an integral part of the continental crust long before Caledonian metamorphism. The presence of a large Caledonian eclogite terrane in Greenland requires modification of current tectonic models that postulate subduction of Baltica beneath Laurentia during the Caledonian orogeny. Received: 9 October 1996 / Accepted: 7 July 1997     

The role of rock and clast fabric in the physical performance of crushed-rock aggregate

Crushed rock aggregate responds in a rational and predictable manner to the two tests designed by British Standards for assessing aggregate strength, i.e., Aggregate Impact (IV) and Crushing Values (ACV). The values obtained in both tests are influenced by intrinsic geological factors namely, petrology, petrography, rock and clast fabric. The Impact Value is affected further by procedural variables which have been identified and evaluated. When the effects of all these variables are known it is possible to understand the meaning of variation in test values within and between rock groups.Two new indices Impact and Aggregate Crushing Value Residues were introduced to probe more deeply the effects of cataclasis during testing. These have proved to be sensitive indicators of the geological variables like petrology and clast shape.In view of the rational behaviour of aggregate in the predictive tests it is possible to erect a new and more utilitarian classification of roadstone materials based on mechanical factors rather than the mineralogical-chemical basis of existing classifications. An outline of such a classification is presented.