Using a maximum simplicity paleoclimate model to simulate millennial variability during the last four glacial periods

Many studies have documented the existence of millennial-scale variability in the Earth system during the last glacial period. An increasing number of studies document the occurrence of similar millennial variability during glacial periods previous to the last one. Here we use the simplest possible thermal-bipolar seesaw model to consider this variability for the last four glacial periods. We invert this model and use the high-pass filtered Vostok stable isotope records to make a first, tentative, attempt to estimate high-latitude N. Hemisphere temperature variability over the last four glacial periods, beyond the reach of Greenland ice-core records. The model result is compared against the Vostok methane record, which shows rapid variations in parallel to Greenland temperature records during the last glacial period. A further comparison is carried out against the planktonic oxygen isotope of north Atlantic core ODP 980. There is agreement between the records on the existence of similar millennial-scale variability during the last three glacial periods with very similar characteristics to the variability during the last glacial cycle.     

Tomographic inversion of P410s delay times for simultaneous determination of P and S velocities of the upper mantle beneath the Baltic Shield

Teleseismic data recorded by stations in the Swedish National Seismic Network (SNSN) are used for a study of upper mantle structure beneath the Baltic Shield using the receiver function technique. The data show very clear conversions from the 410 and 660 km discontinuities. The signals associated with P to S conversions at these discontinuities arrive 1-2 s earlier than predicted by global models such as IASP91 or PREM. We interpret this as a manifestation of higher than average velocities in the mantle beneath the shield, consistent with lower than average global temperatures. For a 1400 km profile along the network, we observe variations of around 1 second in delay times of P410s and slightly less for P660s. Under the assumption that the mantle discontinuities are at a given constant depth, the delay times of the mantle converted phases are tomographically inverted to reveal P and S velocity structure below the stations. Synthetic tests show that this tomographic inversion has the potential to resolve P and S velocity variations at structural scales adequate for upper mantle studies. Results from application to real data appear to be consistent with independently produced mantle velocity structures deduced from normal tomographic arrival time data. For the P velocity model, a north-dipping body of (relatively) low velocity is found for the central part of the profile at 58-64°N. A sharp contrast from low to high velocities that may be associated with the Proterozoic-Archean boundary is found at 66°N.     

Satellite aided capture

A two body, patched conic analysis is presented for a planetary capture mode in which a gravity assist by an existing natural satellite of the planet aids in the capture. An analytical condition sufficient for capture is developed and applied for the following planet/satellite systems: Earth/Moon, Jupiter/Ganymede, Jupiter/Callisto, Saturn/Titan and Neptune/Triton. Co-planar, circular planetary orbits are assumed. Three sources of bodies to be captured are considered: spacecraft launched from Earth, bodies entering the solar system from interstellar space, and bodies already in orbit around the Sun. Results show that the Neptune/Triton system has the most capability for satellite aided capture of those studied. It can easily capture bodies entering the Solar System from interstellar space. Its ability to capture spacecraft launched from Earth is marginal and can only be decided with better definition of physical properties. None of the other systems can capture bodies from these two sources, but all can capture bodies already in orbit around the Sun under appropriate conditions.     

A diverse rodent fauna from the middle Bartonian (Eocene) of Les Alleveys,Switzerland: snapshot of the early theridomyid radiation

A fossiliferous fissure filling at Les Alleveys, Mormont (Canton de Vaud, Switzerland), sampled in 1986 and representing part of the same fissure system as that excavated by Chavannes and Morlot in 1852, contains an Eocene mammal fauna of 27 species-group taxa, dominated by micromammals. Unlike the 1852 collection, thanks to screenwashing techniques, there is an abundance of rodents, especially theridomyids, which provide new information on the early radiation of the family. The homogeneity of the new assemblage suggests that the Les Alleveys fauna is entirely Bartonian in age and not as previously thought mixed with Priabonian elements. Bartonian faunas rich in a diversity of micromammals are relatively uncommon in Europe outside the Quercy region of France and this is the first such fauna from Mormont and from Switzerland. The rodents are here treated systematically and a new species of Elfomys, E. engesseri sp. nov. is described. A few teeth of an undescribed species tentatively referred to ‘Protadelomys’ provide an archaic element, whereas a single milk premolar of Patriotheridomys? suggests a considerable range for the genus prior to the middle Priabonian. The Les Alleveys theridomyids, together with a range of other early family members are analysed cladistically. The analysis confirms both the distinctness of the subfamily Remyinae and that the genus Estellomys is a primitive theridomyine; it shows Paradelomys to be a primitive member of the Columbomyinae, but finds no dental synapomorphies to support the Issiodoromyinae as represented by Elfomys and Pseudoltinomys.     

Synthesis and properties of ammoniojarosites prepared with iron-oxidizing acidophilic microorganisms at 22-65 °C

Ammoniojarosite [(NH₄,H₃O)Fe₃(OH)₆(SO₄)₂], a poorly soluble basic ferric sulfate, was produced by microbiological oxidation of ferrous sulfate at pH 2.0-3.0 over a range of concentrations (5.4-805 mM) and temperatures (22-65 °C). Ammoniojarosites were also produced by chemical (abiotic) procedures in parallel thermal (36-95 °C) experiments. At 36 °C, schwertmannite [ideally Fe₈O₈(OH)₆(SO₄)] was the only solid product formed at <10 mM concentrations. Between 11.5 and 85.4 mM , a mixed product of ammoniojarosite and schwertmannite precipitated, as identified by X-ray diffraction. In excess of 165 mM , ammoniojarosite was the only solid phase produced. An increase in the incubation temperature using thermoacidophiles at 45 and 65 °C accelerated the formation of ammoniojarosite in culture solutions containing 165 mM . Both the biogenic and chemical ammoniojarosites were yellow (2Y-4Y in Munsell hue), low surface area (<1 m²/g), well crystalline materials with average c_o and a_o unit cell parameters of 17.467 ± 0.048 Å and 7.330 ± 0.006 Å, respectively. Strong positive correlations were observed between unit cell axial ratios (c_o/a_o) and increasing synthesis temperature in both biotic and abiotic systems. All samples were N deficient compared to stoichiometric ammoniojarosite, and both chemical and X-ray data indicated partial replacement of by H₃O⁺ to form solid solutions with 0.14-0.24 mole H₃O⁺ per formula unit. The morphology of the biogenic jarosites included aggregated discs, pseudo-cubic crystals and botryoidal particles, whereas the chemical specimens prepared at 36-95 °C were composed of irregular crystals with angular edges. Morphological information may thus be useful to evaluate environmental parameters and mode of formation. The data may also have application in predicting phase boundary conditions for Fe(III) precipitation in biogeochemical processes and treatment systems involving acid sulfate waters.     

Oil well produced water discharges to the North Sea. Part I: comparison of deployed mussels (Mytilus edulis), semi-permeable membrane devices, and the DREAM model predictions to estimate the dispersion of polycyclic aromatic hydrocarbons

The oil companies operating in the Norwegian sector of the North Sea have conducted field studies since the mid-1990s to monitor produced water discharges to the ocean. These studies have been used to refine monitoring methods, and to develop and validate a dispersion and impact assessment model. This paper summarizes monitoring data from surveys conducted in two major oil and gas production areas, and compares the results to concentrations of polycyclic aromatic hydrocarbons (PAH) in surface waters predicted by the dose-related risk and effect assessment model (DREAM). Blue mussels and semi-permeable membrane devices (SPMDs) were deployed in the Ekofisk and Tampen Regions and analyzed for more than 50 PAH. PAH concentrations in ambient seawater were estimated based on the mussels and SPMD concentrations, and compared to model predictions. Surface water total PAH concentrations ranged from 25 to 350 ng/L within 1 km of the platform discharges and reached background levels of 4-8 ng/L within 5-10 km of the discharge; a 100,000-fold dilution of the PAH in the discharge water. The PAH concentrations in surface water, predicted by three methods, compared well for the Ekofisk Region. The model predicted higher concentrations than the field-based methods for parts of the Tampen Region; particularly the most tidally influenced areas. Tidally-mediated fluctuations in PAH concentrations in surface water must be considered because they affect the estimation of PAH concentrations from mussel and SPMD residue data, and the predictions by the DREAM model. Predictions using mussels, SPMDs, and modeling support and complement each other; all are valuable tools for estimating the fate and impact of chemical contaminants in produced water that are discharged to the ocean.     

Oil well produced water discharges to the North Sea. Part II: comparison of deployed mussels (Mytilus edulis) and the DREAM model to predict ecological risk

Large volumes of water often are produced with oil and gas from offshore platforms. The produced water is separated from the oil and gas and either reinjected into a deep formation or discharged to the ocean. The Norwegian oil and gas industry advocates ecological risk assessment as the basis for managing produced water discharges to the North Sea. In this paper, we compare estimates of ecological risks to water-column communities based on data on hydrocarbon residues in soft tissues of blue mussels deployed for a month near offshore platforms and based on predictions of the Dose related Risk and Effect Assessment Model (DREAM). The study was performed near produced water discharges to the Tampen and Ekofisk Regions of the Norwegian Sector of the North Sea. Because polycyclic aromatic hydrocarbons (PAH) are considered the most important contributors to the ecological hazard posed by produced water discharges, comparisons made here focus on this group of compounds. The mussel approach is based on predicted environmental concentrations (PECs) of individual PAH, estimated from PAH residues in mussels following deployment for a month near several produced water discharges, and predicted no effects concentrations (PNECs) based on a K(ow) regression model. In the DREAM method, PECs for three PAH fractions are estimated in the three-dimensional area around produced water discharge with the DREAM model. PNECs for each fraction are based on the chronic toxicity of a representative PAH from each fraction divided by an assessment factor to account for uncertainty in the chronic value. The mussel method gives much lower estimates of ecological risk than the DREAM method. The differences are caused by the much lower PNECs used in DREAM than derived from the regression model, and by the lower concentrations of aqueous PAH predicted by DREAM than estimated from PAH residues in mussel tissues. However, the two methods rank stations at different distances from produced water discharges in the same order and both identify 2- and 3-ring PAHs as the main contributors to the ecological risk of produced water discharges. Neither method identifies a significant ecological risk of PAH in the upper water column of the oil fields. The DREAM model may produce an overly conservative estimate of ecological risk of produced water discharges to the North Sea.     

Impact of spatial rainfall resolution on point-source solute transport modelling

Numerical simulations of unsaturated solute transport from point sources were carried out using HYDRUS-1D. Three different soil types cropped with spring wheat were considered at three different locations in Sweden: Malmö, Norrköping and Petisträsk. Two types of rainfall data were used, point-scale raingauge measurements and a gauge-adjusted weather radar product at four spatial resolutions, 2 × 2, 6 × 6, 10 × 10 and 14 × 14 km². The results showed that differences in the mean solute transport depths were small and not significant, with the exception of Petisträsk. Maximum transport depths were in most cases significantly larger using raingauge data compared to radar data. The results showed that using areal-averaged rainfall input will give solute transport estimations close to those using point-measured data. This shows the great potential in using radar-measured rainfall data in small-scale hydrological applications.