Tomographic inversion of P410s delay times for simultaneous determination of P and S velocities of the upper mantle beneath the Baltic Shield

Teleseismic data recorded by stations in the Swedish National Seismic Network (SNSN) are used for a study of upper mantle structure beneath the Baltic Shield using the receiver function technique. The data show very clear conversions from the 410 and 660 km discontinuities. The signals associated with P to S conversions at these discontinuities arrive 1-2 s earlier than predicted by global models such as IASP91 or PREM. We interpret this as a manifestation of higher than average velocities in the mantle beneath the shield, consistent with lower than average global temperatures. For a 1400 km profile along the network, we observe variations of around 1 second in delay times of P410s and slightly less for P660s. Under the assumption that the mantle discontinuities are at a given constant depth, the delay times of the mantle converted phases are tomographically inverted to reveal P and S velocity structure below the stations. Synthetic tests show that this tomographic inversion has the potential to resolve P and S velocity variations at structural scales adequate for upper mantle studies. Results from application to real data appear to be consistent with independently produced mantle velocity structures deduced from normal tomographic arrival time data. For the P velocity model, a north-dipping body of (relatively) low velocity is found for the central part of the profile at 58-64°N. A sharp contrast from low to high velocities that may be associated with the Proterozoic-Archean boundary is found at 66°N.     

Surface runoff and soil erosion under eucalyptus and oak canopy

To assess potential differences in stormwater runoff and sediment yield between plots of blue gum eucalyptus (Eucalyptus globulus) and coast live oak (Quercus agrifolia), we measured runoff, sediment yield, water repellency and soil moisture at eight paired sites. Eucalyptus has been associated in many studies worldwide with elevated soil water repellency and increased runoff, a likely contributor to soil erosion. To better understand these connections and their relationship to land cover, there is a need for studies employing either rainfall simulators or natural rainfall. Our research employs the latter, and was subject to contrasting hydrologic conditions in the two years of the study. Fieldwork was conducted from October 2006 to February 2008 in the San Francisco Bay Area of central California. During the 2006–2007 winter wet season, runoff was significantly higher under eucalypts than at paired oak sites, and in the early phases of the season was connected with elevated water repellency. However, sediment yield at all sites during the 2006–2007 hydrologic year was below the detection limit of the Gerlach sediment collection traps, possibly due to a limited wet season, and only appeared as suspended sediment captured in overflow buckets. Intensive rainfall events in January 2008 however created substantial runoff of sediment and litter with significantly greater yield at oak sites compared to paired eucalyptus sites. Water repellency likely had little effect on runoff during these events, and the primary cause of greater erosion under oaks is the thinner cover of leaf litter in comparison to eucalyptus. Our study is limited to undisturbed sites with intact litter cover that have not experienced recent wildfires; if disturbed, we would expect a different picture given the propensity for crown fires of eucalypts, enhancement of rainsplash erosion, and the likely greater potential for stream‐connected sediment yield from post‐disturbance soil erosion events.     

Substorm fields in and near the auroral zone

During the last few years, the study of both temporal and spatial variations of substorm fields has rapidly expanded, mainly because of the relationships which exist between polar magnetic substorms and magnetospheric phenomena. Also during these years, proposed current systems believed to be responsible for substorm variations have evolved into complex three-dimensional systems with field-aligned and magnetospheric currents coupled to the eastward and westward electrojets. Recent model studies show that substorm variations in and near the auroral zone can easily be modelled using both two and three-dimensional current systems. In these studies, induction effects were simulated by assuming the Earth to be infinitely conducting at some depth below the surface.The use of magnetometers distributed along magnetic meridians has resulted in a better understanding of the complex current patterns making up the electrojets. For example, during the expansive phase of substorms, the westward and poleward progression of the overall westward electrojet was discovered to take place through the sequential development of a series of westward electrojets.     

Geochemical signatures of possible deep-seated ore deposits in Tertiary volcanic centers, Arizona and New Mexico, U.S.A.

A reconnaissance geochemical survey of stream drainages within 21,000 km² of southeastern Arizona and southwestern New Mexico shows broad zones of low-level to moderate contrast anomalies, many associated with mid-Tertiary eruptive centers and Tertiary fault zones. Of these eruptive centers, few are known to contain metallic deposits, and most of those known are minor. This, however, may be more a function of shallow erosion level than an indication of the absence of mineralization, since hydrothermal alteration and Fe-Mn-oxide staining are widespread, and geochemical anomalies are pervasive over a larger part of the region than outcrop observations would predict. Accordingly, interpretations of the geochemical data use considerations of relative erosion levels, and inferred element zonalities, to focus on possible undiscovered deposits in the subsurface of base-, precious-, and rare-metal deposits of plutonic-volcanic association. In order to enhance the identification of specific deep targets, we use the empirically determined ratio: This ratio is based on reported metal contents of nonmagnetic heavy-mineral samples from the drainage sediment, determined by emission spectrographic analysis. Before the ratio was computed for each sample site, the data were normalized to a previously estimated regional threshold value. A regional isopleth map was then prepared, using a cell-averaging computer routine, with contours drawn at the 25th, 50th, 75th, 80th, 90th, 95th and 99th percentiles of the computed data.     

Quasi‐continuous reservoir monitoring with surface seismic data

We present an approach that creates the possibility of reservoir monitoring on a quasi‐continuous basis using surface seismic data. Current strategies and logistics for seismic data acquisition impose restrictions on the calendar‐time temporal resolution obtainable for a given surface‐seismic time‐lapse monitoring program. One factor that restricts the implementation of a quasi‐continuous monitoring program using conventional strategies is the time it takes to acquire a complete survey. Here quasi‐continuous monitoring describes the process of reservoir monitoring at short‐time intervals. Our approach circumvents the restriction by requiring only a subset of complete survey data each time an image of the reservoir is needed using surface seismic data. Ideally, the time interval between survey subset acquisitions should be short so that changes in the reservoir properties are small. The accumulated data acquired are used to estimate the unavailable data at the monitor survey time and the combined recorded and estimated data are used to produce an image of the subsurface for monitoring. We will illustrate the effectiveness of our approach using 2D and 3D synthetic seismic data and 3D field seismic data. We will explain the benefits and drawbacks of the proposed approach.     

Traditional ecological knowledge and community resilience to environmental extremes: A case study in Doñana,SW Spain

Research in the last decade has emphasised the potential contribution of traditional ecological knowledge to cope with challenges from global environmental change. This research examines the role of traditional ecological knowledge and shared systems of beliefs in building long-term social–ecological resilience to environmental extremes. Data were collected from 13 villages of the Doñana region, southwestern Spain, through interviews, focus groups, and systematic reviews of historical archives. First, we assess adaptive practices to cope with environmental change. Then, we use historical records of religious ceremonies (1577–1956) to reconstruct collective responses to environmental extremes. Our results (1) show how environmental extremes could induce social and economic crises through declines in ecosystem services and (2) identify practices to cope with recurrent disturbance and institutional devices developed in response to environmental extremes. We conclude that traditional ecological knowledge and shared systems of beliefs can facilitate collective responses to crises and contribute to the maintenance of long-term resilience of social–ecological systems.     

Comparison of mussels and semi-permeable membrane devices as intertidal monitors of polycyclic aromatic hydrocarbons at oil spill sites

Side-by-side comparisons of polycyclic aromatic hydrocarbon (PAH) concentrations in resident blue mussels (Mytilus trossulus) and in semi-permeable membrane devices (SPMDs) were made at four sites in Prince William Sound, Alaska. SPMDs were deployed for approximately 30 days on the surface of the beach sediment at three tidal elevations on each shore and in 0.5 m deep open pits in the middle intertidal zone. Total PAH (TPAH) concentrations in mussels and in SPMDs were correlated, but the PAH compositions were different. The lower molecular weight PAH were relatively more abundant in the SPMDs than in the mussels at oiled and HA sites. TPAH concentrations in SPMDs deployed in pits and mussels collected adjacent to those pits at oiled sites were higher than in SPMDs and mussels from non-pitted SPMD locations approximately 3-15 m from the pits. Pitting released buried oil making its PAH bioavailable. SPMDs deployed in the supratidal zone (+4.0 m tidal elevation) were exposed to atmospheric contaminants for a large fraction of the deployment time and accumulated primarily pyrogenic (combustion-sourced) PAH from the atmosphere. The SPMD strips supplied by the manufacturer contained significant amounts (approximately 125 ng/strip) of primarily alkylated 2-3 ring PAH. These blank levels make SPMDs unsuitable for shoreline assessments when environmental PAH concentrations are low. Consequently, where available, mussels are recommended for use in assessments of the bioavailability of buried oil residues sequestered in intertidal sediments following an oil spill. Mussels are the preferred monitoring tool when the assessments involve food-chain effects. At locations where the absence of mussels necessitates the use of SPMDs or other passive sampling devices, their limitations need to be carefully considered in the interpretation of results.     

Delineating alluvial aquifer heterogeneity using resistivity and GPR data

Conceptual geological models based on geophysical data can elucidate aquifer architecture and heterogeneity at meter and smaller scales, which can lead to better predictions of preferential flow pathways. The macrodispersion experiment (MADE) site, with >2000 measurements of hydraulic conductivity obtained and three tracer tests conducted, serves as an ideal natural laboratory for examining relationships between subsurface flow characteristics and geophysical attributes in fluvial aquifers. The spatial variation of hydraulic conductivity measurements indicates a large degree of site heterogeneity. To evaluate the usefulness of geophysical methods for better delineating fluvial aquifer heterogeneities and distribution of preferential flow paths, a surface grid of two-dimensional ground penetrating radar (GPR) and direct current (DC) resistivity data were collected. A geological model was developed from these data that delineate four stratigraphic units with distinct electrical and radar properties including (from top to bottom) (1) a meandering fluvial system (MFS); (2) a braided fluvial system (BFS); (3) fine-grained sands; and (4) a clay-rich interval. A paleochannel, inferred by other authors to affect flow, was mapped in the MFS with both DC resistivity and GPR data. The channel is 2 to 4 m deep and, based on resistivity values, is predominantly filled with clay and silt. Comparing previously collected hydraulic conductivity measurements and tracer-plume migration patterns to the geological model indicates that flow primarily occurs in the BFS and that the channel mapped in the MFS has no influence on plume migration patterns.     

A field sampling strategy for semivariogram inference of fractures in rock outcrops

The stochastic continuum (SC) representation is one common approach for simulating the effects of fracture heterogeneity in groundwater flow and transport models. These SC reservoir models are generally developed using geostatistical methods (e.g., kriging or sequential simulation) that rely on the model semivariogram to describe the spatial variability of each continuum. Although a number of strategies for sampling spatial distributions have been published in the literature, little attention has been paid to the optimization of sampling in resource- or access-limited environments. Here we present a strategy for estimating the minimum sample spacing needed to define the spatial distribution of fractures on a vertical outcrop of basalt, located in the Box Canyon, east Snake River Plain, Idaho. We used fracture maps of similar basalts from the published literature to test experimentally the effects of different sample spacings on the resulting semivariogram model. Our final field sampling strategy was based on the lowest sample density that reproduced the semivariogram of the exhaustively sampled fracture map. Application of the derived sampling strategy to an outcrop in our field area gave excellent results, and illustrates the utility of this type of sample optimization. The method will work for developing a sampling plan for any intensive property, provided prior information for a similar domain is available; for example, fracture maps or ortho-rectified photographs from analogous rock types could be used to plan for sampling of a fractured rock outcrop.