Macrofauna along the Sudanese Red Sea coast: potential effect of mangrove clearance on community and trophic structure

Mangroves along the Sudanese Red Sea coast are under constant anthropogenic pressure. To better understand the influence of mangrove clearance on the intertidal benthic community, we investigated the composition, biodiversity and standing stock of the macrofauna communities at high‐, mid‐ and low‐water levels in three contrasting habitats: a bare sand flat, a cleared mangrove and an intact mangrove. In addition, a community‐wide metric approach based on taxon‐specific carbon and nitrogen isotope values was used to compare the trophic structure between the three habitats. The habitats differed significantly in terms of macrofaunal standing stock, community composition and trophic structure. The high‐ and mid‐water levels of the intact mangroves showed a distinct macrofaunal community characterized by elevated densities and biomass, largely governed by higher decapod and gastropod abundances. Diversity was similar for cleared and intact mangroves, but much lower for the bare sand flat. Community‐wide metrics indicated highest trophic diversity and community niche breadth in the intact mangroves. Differences between the cleared and intact mangroves can be partly attributed to differences in sediment characteristics resulting from mangrove clearance. These results suggest a significant impact of mangrove clearance on the macrofaunal community and trophic structure. This study calls for further investigations and management actions to protect and restore these habitats, and ensure the survival of this ecologically valuable coastal ecosystem.     

The value of a physically based model versus an empirical approach in the prediction of ephemeral gully erosion for loess-derived soils

A data set on soil losses and controlling factors for 58 ephemeral gullies has been collected in the Belgian loess belt from March 1997 to March 1999. Of the observed ephemeral gullies, 32 developed at the end of winter or in early spring (winter gullies) and 26 ephemeral gullies developed during summer (summer gullies). The assessed data have been used to test the physically based Ephemeral Gully Erosion Model (EGEM) and to compare its performance with the value of simple topographical and morphological indices in the prediction of ephemeral gully erosion.Analysis shows that EGEM is not capable of predicting ephemeral gully cross-sections well. Although conditions for input parameter assessment were ideal, some parameters such as channel erodibility, critical flow shear stress and local rainfall depth showed great uncertainty. Rather than revealing EGEM's inability of predicting ephemeral gully erosion, this analysis stresses the problematic nature of physically based models, since they often require input parameters that are not available or can hardly be obtained.With respect to the value of simple topographical and morphological indices in predicting ephemeral gully erosion, this study shows that for winter gullies and summer gullies, respectively, over 80% and about 75% of the variation in ephemeral gully volume can be explained when ephemeral gully length is known. Moreover, when previously collected data for ephemeral gullies in two Mediterranean study areas and the data for summer gullies formed in the Belgian loess belt are pooled, it appears that one single length (L)–volume (V) relation exists (V=0.048 L^1.29; R²=0.91). These findings imply that predicting ephemeral gully length is a valuable alternative for the prediction of ephemeral gully volume. A simple procedure to predict ephemeral gully length based on topographical thresholds is presented here. Secondly, the empirical length–volume relation can also be used to convert ephemeral gully length data extracted from aerial photos into ephemeral gully volumes.     

Perceived fairness and public acceptability of carbon pricing: a review of the literature

While carbon pricing is widely seen as a crucial element of climate policy and has been implemented in many countries, it also has met with strong resistance. We provide a comprehensive overview of public perceptions of the fairness of carbon pricing and how these affect policy acceptability. To this end, we review evidence from empirical studies on how individuals judge personal, distributional and procedural aspects of carbon taxes and cap-and-trade. In addition, we examine preferences for particular redistributive and other uses of revenues generated by carbon pricing and their role in instrument acceptability. Our results indicate a high concern over distributional effects, particularly in relation to policy impacts on poor people, in turn reducing policy acceptability. In addition, people show little trust in the capacities of governments to put the revenues of carbon pricing to good use. Somewhat surprisingly, most studies do not indicate clear public preferences for using revenues to ensure fairer policy outcomes, notably by reducing its regressive effects. Instead, many people prefer using revenues for ‘environmental projects’ of various kinds. We end by providing recommendations for improving public acceptability of carbon pricing. One suggestion to increase policy acceptability is combining the redistribution of revenue to vulnerable groups with the funding for environmental projects, such as on renewable energy.

Key policy insights

• If people perceive carbon pricing instruments as fair, this increases policy acceptability and support.

• People’s satisfaction with information provided by the government about the policy instrument increases acceptability.

• While people express high concern over uneven distribution of the policy burden, they often prefer using carbon pricing revenues for environmental projects instead of compensation for inequitable outcomes.

• Recent studies find that people’s preferences shift to using revenues for making policy fairer if they better understand the functioning of carbon pricing, notably that relatively high prices of CO₂-intensive goods and services reduce their consumption.

• Combining the redistribution of revenue to support both vulnerable groups and environmental projects, such as on renewable energy, seems to most increase policy acceptability.

     

On the physics of the Atlantic Multidecadal Oscillation

The Atlantic Multidecadal Oscillation (AMO) is a pronounced signal of climate variability in the North Atlantic sea-surface temperature field. In this paper, we propose an explanation of the physical processes responsible for the timescale and the spatial pattern of the AMO. Our approach involves the analysis of solutions of a hierarchy of models. In the lowest member of the model hierarchy, which is an ocean-only model for flow in an idealized basin, the variability shows up as a multidecadal oscillatory mode which is able to destabilize the mean thermohaline circulation. In the highest member of the model hierarchy, which is the Geophysical Fluid Dynamics Laboratory R30 climate model, multidecadal variability is found as a dominant statistical mode of variability. The connection between both results is established by tracing the spatial and temporal expression of the multidecadal mode through the model hierarchy while monitoring changes in specific quantities (mechanistic indicators) associated with its physics. The proposed explanation of the properties of the AMO is eventually based on the changes in the spatial patterns of variability through the model hierarchy.Responsible Editor: Tal Ezer     

南加州地壳的伴随层析成像

使用基于伴随方法的反演策略,研制出了南加州地壳的三维地震模型。该模型涉及到16次层析成像迭代,需要6800次波场模拟和总计80万个中心处理单位小时。与南加州地震中心给出的最初三维模型比较,该新的地壳模型揭示了更强的非均匀性,包括±30%的局部变化。模型说明了诸如沉积盆地和横跨断层的构造反差的浅部特征。也揭示了深部的地壳特征,从而帮助重建诸如俯冲捕获洋壳碎块的南加州构造。新模型有助于对地震危险性做出更实际而准确的评估。     

A Reliability Analysis of Rainwater Catchment System

Water Resources - This article examines the reliability of rainwater harvesting (RWH) systems in subcatchment area. Using water balance simulation and two definitions of this value (time-based and...     

Butyltins in marine waters of The Netherlands in 1988 and 1989; Concentrations and effects

Specific effects of tributyltin (TBT) on Crassostrea gigas—valve thickening, and Nucella lapillus—imposex, were measured on local populations, relatively clean unaffected species from England were transferred to the Netherlands and exposed during six weeks to ambient TBT concentrations. Near marinas 50% of the exposed species were sterile after six weeks. In general, no dissolved butyltins were detected in the Rhine and Scheldt estuaries. In 1988 TBT concentrations in marinas ranged from 120 to 4000 ng litre⁻¹. In sediments (fraction <60 μm) and suspended particulate matter TBT concentrations reached up to 1200 ng g⁻¹. TBT concentrations in mussel tissue ranged from <1 to 2300 ng g⁻¹ based on a dry weight. In 1989 concentrations of dissolved TBT ranged from <0·1 to 7200 ng litre⁻¹. In 1989 a seasonal study in the marina of Colijnsplaat showed that dissolved butyltins increased from April to the end of May due to the launching of freshly painted boats, and decreased afterwards.     

A Compilation of Silicon,Rare Earth Element and Twenty‐One other Trace Element Concentrations in the Natural River Water Reference Material SLRS‐5 (NRC‐CNRC)

The natural river water certified reference material SLRS‐5 (NRC‐CNRC) was routinely analysed in this study for major and trace elements by ten French laboratories. Most of the measurements were made using ICP‐MS. Because no certified values are assigned by NRC‐CNRC for silicon and 35 trace element concentrations (rare earth elements, Ag, B, Bi, Cs, Ga, Ge, Li, Nb, P, Rb, Rh, Re, S, Sc, Sn, Th, Ti, Tl, W, Y and Zr), or for isotopic ratios, we provide a compilation of the concentrations and related uncertainties obtained by the participating laboratories. Strontium isotopic ratios are also given.     

Predicting reach‐specific properties of fluvial terraces to guide future fieldwork. A case study for the Late Quaternary River Allier (France) with the FLUVER2 model

Numerical models have not yet systematically been used to predict properties of fluvial terrace records in order to guide fieldwork and sampling. This paper explores the potential of the longitudinal profile model FLUVER2 to predict testable field properties of the relatively well‐studied, Late Quaternary Allier system in France. For the Allier terraces an overlapping ¹⁴C and U‐series chronology as well as a record of ¹⁰Be erosion rates exist. The FLUVER2 modelling exercise is focused on the last 50 ka of the upper Allier reach because for this location and period the constraints of the available dating techniques are tightest. A systematic calibration based on terrace occurrence and thicknesses was done using three internal parameters related to (1) the sediment erodibility; (2) the sediment transport distance; and (3) the sediment supply derived from the surrounding landscape. As external model inputs, the best available, reconstructed, tectonic, climatic and base‐level data were used. Calibrated model outputs demonstrate a plausible match with the existing fluvial record. Validation of model output was done by comparing the modelled and measured timing of aggradation and incision phases for the three locations. The modelled range of landscape erosion rates showed a reasonably good match with existing erosion rate estimates derived from ¹⁰Be measurements of fluvial sands. The quasi‐validated model simulation was subsequently used to make new testable predictions about the timing and location of aggradation and erosion phases for three locations along the Allier river. The validated simulations predict that along the Allier, reach‐specific dynamics of incision and aggradation, related to the variations in sediment supply by major tributaries, cause relevant differences in the local fluvial terrace stratigraphy. Copyright © 2016 John Wiley & Sons, Ltd.