GGR Critical Review of Analytical Developments in 2008–2009: An Introduction

This collection of articles represents the fourth in a series of reviews in which authors have aimed at capturing the key advances in a range of analytical fields ( Hergt et al. 2005, 2006, 2008 ). The publication period under review is 2008–2009 and the intention here is to provide readers with a summary of the most influential developments published during this period, across a broad range of topics appropriate to the Earth and environmental sciences. Most authors comment on the ways in which the emphases of research in their specific fields of examination have changed over time. All note an increase in rigour and focus on data quality. Whether advances have taken place in instrumentation, sample manipulation or data deconvolution, there are a large number of dedicated scientists out there contributing to the high quality of geochemical data employed in geological and environmental research.     

Crop yield model validation for Cameroon

A crop simulation model must first be capable of representing the actual performance of crops grown in any region before it can be applied to the prediction of climate variability and change impacts. A cropping systems model (CropSyst) simulations of crop productivity in the sub-Saharan Central African (using Cameroon as the case study) region, under the current climate were compared with observed yields of maize, sorghum, groundnut, bambara groundnut and soybean from eight sites. The model produced both over-and-under estimates, but with a mean percentage difference of only –2.8%, ranging from –0.6% to –4.5%. Based on these results, we judged the CropSyst simulations sufficiently reliable to justify use of the model in assessing crop growth vulnerability to climatic changes in Cameroon and else where.     

Relationships among monsoon-season circulation patterns, gulf surges, and rainfall within the Lower Colorado River Basin, USA

The purpose of this study is to assess the connections between the monsoon anticyclone, gulf surges, and rainfall within the Lower Colorado River Basin (LCRB) during North American monsoon seasons from 1988-2006. The methods involved calculating rainfall characteristics and near-surface humidity for 500-hPa circulation patterns, creating circulation and near-surface humidity composites for rainfall days, and creating near-surface humidity composites for rainfall days occurring under each circulation pattern. The circulation was dominated by the monsoon anticyclone being over or to the immediate east of the basin. The anticyclone was shifted to the northwest (east) of its seasonal mean position on rainfall days in the central portion of the basin (far eastern portion of the basin). Rainfall influenced by gulf surges was most likely when the monsoon anticyclone was shifted westward, especially northwestward, of its typical position. The central portion of the basin received substantially more surge-influenced rainfall than did the far eastern portion of the basin.     

An atmosphere–ocean regional climate model for the Mediterranean area: assessment of a present climate simulation

We present an atmosphere–ocean regional climate model for the Mediterranean basin, called the PROTHEUS system, composed by the regional climate model RegCM3 as the atmospheric component and by a regional configuration of the MITgcm model as the oceanic component. The model is applied to an area encompassing the Mediterranean Sea and compared to a stand-alone version of its atmospheric component. An assessment of the model performances is done by using available observational datasets. Despite a persistent bias, the PROTHEUS system is able to capture the inter-annual variability of seasonal sea surface temperature (SST) and also the fine scale spatio-temporal evolution of observed SST anomalies, with spatial correlation as high as 0.7 during summer. The close inspection of a 10-day strong wind event during the summer of 2000 proves the capability of the PROTHEUS system to correctly describe the daily evolution of SST under strong air–sea interaction conditions. As a consequence of the model’s skill in reproducing observed SST and wind fields, we expect a reliable estimation of air–sea fluxes. The model skill in reproducing climatological land surface fields is in line with that of state of the art regional climate models.     

Constraining stress magnitudes using petroleum exploration data in the Cooper–Eromanga Basins, Australia

The magnitude of the in situ stresses in the Cooper–Eromanga Basins have been determined using an extensive petroleum exploration database from over 40 years of drilling. The magnitude of the vertical stress (S_v) was calculated based on density and velocity checkshot data in 24 wells. Upper and lower bound values of the vertical stress magnitude are approximated by S_v = (14.39 × Z)^1.12 and S_v = (11.67 × Z)^1.15 functions respectively (where Z is depth in km and S_v is in MPa). Leak-off test data from the two basins constrain the lower bound estimate for the minimum horizontal stress (S_hmin) magnitude to 15.5 MPa/km. Closure pressures from a large number of minifrac tests indicate considerable scatter in the minimum horizontal stress magnitude, with values approaching the magnitude of the vertical stress in some areas. The magnitude of the maximum horizontal stress (S_Hmax) was constrained by the frictional limits to stress beyond which faulting occurs and by the presence of drilling-induced tensile fractures in some wells. The maximum horizontal stress magnitude can only be loosely constrained regionally using frictional limits, due to the variability of both the minimum horizontal stress and vertical stress estimates. However, the maximum horizontal stress and thus the full stress tensor can be better constrained at individual well locations, as demonstrated in Bulyeroo-1 and Dullingari North-8, where the necessary data (i.e. image logs, minifrac tests and density logs) are available. The stress magnitudes determined indicate a predominantly strike-slip fault stress regime (S_Hmax > S_v > S_hmin) at a depth of between 1 and 3 km in the Cooper–Eromanga Basins. However, some areas of the basin are transitional between strike-slip and reverse fault stress regimes (S_Hmax > S_v ≈ S_hmin). Large differential stresses in the Cooper–Eromanga Basins indicate a high upper crustal strength for the region, consistent with other intraplate regions. We propose that the in situ stress field in the Cooper–Eromanga Basins is a direct result of the complex interaction of tectonic stresses from the convergent plate boundaries surrounding the Indo-Australian plate that are transmitted into the center of the plate through a high-strength upper crust.     

Evidence for ground-rupturing earthquakes on the Northern Wadi Araba fault at the archaeological site of Qasr Tilah, Dead Sea Transform fault system, Jordan

The archaeological site of Qasr Tilah, in the Wadi Araba, Jordan is located on the northern Wadi Araba fault segment of the Dead Sea Transform. The site contains a Roman-period fort, a late Byzantine–Early Umayyad birkeh (water reservoir) and aqueduct, and agricultural fields. The birkeh and aqueduct are left-laterally offset by coseismic slip across the northern Wadi Araba fault. Using paleoseismic and archaeological evidence collected from a trench excavated across the fault zone, we identified evidence for four ground-rupturing earthquakes. Radiocarbon dating from key stratigraphic horizons and relative dating using potsherds constrains the dates of the four earthquakes from the sixth to the nineteenth centuries. Individual earthquakes were dated to the seventh, ninth and eleventh centuries. The fault strand that slipped during the most recent event (MRE) extends to just below the modern ground surface and juxtaposes alluvial-fan sediments that lack in datable material with the modern ground surface, thus preventing us from dating the MRE except to constrain the event to post-eleventh century. These data suggest that the historical earthquakes of 634 or 659/660, 873, 1068, and 1546 probably ruptured this fault segment.     

Cosmogenic 10BE Age Constraints for The Wester Ross Readvance Moraine: Insights Into British Ice-Sheet Behaviour

This study presents the first absoluteage constraints from a palaeo‐ice‐sheet margin in western Scotland. Cosmogenic ¹⁰Be from four Lewisian gneiss boulders on the Gairloch Moraine in NW Scotland have yielded reliable exposure ages. Three of these dates, taken from a single moraine ridge, cluster around c. 15.5–18 ka BP, with a weighted mean of 16.3 ± 1.6 ka BP. These findings indicate that the last British Ice Sheet had retreated to the present‐day coastline in NW Scotland by this time. It is suggested that the Wester Ross Readvance represents an ice‐sheet oscillation during, or in the immediate aftermath of, Heinrich Event 1 (c. 17–18 ka BP).     

U-Th zonation-dependent alpha-ejection in (U-Th)/He chronometry

Both theoretical and empirical evidence shows that intracrystalline U-Th heterogeneity in zircon can lead to biases in (U-Th)/He ages if not accurately accounted for in α-ejection corrections. We present a model for age correction for U-Th zoned crystals. We apply this to spherical and prismatic grains with bipyramidal terminations. The spherical calculation is simplistic but allows rapid calculation of the approximate effects of a wide variety of U-Th zoning patterns. The bipyramidal calculation is computationally intensive but permits an more complete estimate of the combined effects of crystal morphology and source zoning as relevant to zircon. Our principle findings are: (1) the assumption of U-Th homogeneity can result in errors of up to ∼30% (in rare cases, higher) for ejection-corrected ages for typical grain sizes and realistic zonation. (2) Tetragonal prisms with bipyramidal terminations, which are typical of most zircons, exhibit bulk retentivities that can differ by several percent from models considering crystals with pinacoidal terminations. When extreme cases, such as dipyramids, are considered, the bias can exceed 10% or more. (3) Morphologic effects can be accounted for to better than 1% precision by using new second-order polynomial parameters that describe retentivity as a function of surface-area-to-volume ratio calculated through more complete analysis of crystal dimensions including the height of pyramidal crystal sections. We illustrate application of our model using U-Th concentration profiles determined from single zircons by laser ablation ICP-MS from zoned Tardree Rhyolite zircons.     

The Distribution and Enforcement of Air Polluting Facilities in New Jersey

This study examines the spatial distribution and enforcement of air polluting facilities in the state of New Jersey, as listed in the U.S. Environmental Protection Agency's Aerometric Information Retrieval System. Results show that air‐polluting facilities tend to concentrate near minority neighborhoods, although this relationship is partially explained by factors of population density, manufacturing employment, and land use. Other results suggest that facilities in areas with a relatively high percentage of minority population tend to have a weaker record of environmental enforcement as compared to other facilities. Of the socioeconomic variables considered, employment in manufacturing appears to be the most strongly related to environmental enforcement.     

A laboratory study of seismic velocity and attenuation anisotropy in near-surface sedimentary rocks

The laboratory ultrasonic pulse‐echo method was used to collect accurate P‐ and S‐wave velocity (±0.3%) and attenuation (±10%) data at differential pressures of 5–50 MPa on water‐saturated core samples of sandstone, limestone and siltstone that were cut parallel and perpendicular to the vertical borehole axis. The results, when expressed in terms of the P‐ and S‐wave velocity and attenuation anisotropy parameters for weakly transversely isotropic media (ɛ, γ, ɛ_Q, γ_Q) show complex variations with pressure and lithology. In general, attenuation anisotropy is stronger and more sensitive to pressure changes than velocity anisotropy, regardless of lithology. Anisotropy is greatest (over 20% for velocity, over 70% for attenuation) in rocks with visible clay/organic matter laminations in hand specimens. Pressure sensitivities are attributed to the opening of microcracks with decreasing pressure. Changes in magnitude of velocity and attenuation anisotropy with effective pressure show similar trends, although they can show different signs (positive or negative values of ɛ, ɛ_Q, γ, γ_Q). We conclude that attenuation anisotropy in particular could prove useful to seismic monitoring of reservoir pressure changes if frequency‐dependent effects can be quantified and modelled.