An empirical model of subcritical bedform migration

The ability to predict bedform migration in rivers is critical for estimating bed material load, yet there is no relation for predicting bedform migration (downstream translation) that covers the full range of conditions under which subcritical bedforms develop. Here, the relation between bedform migration rates and transport stage is explored using a field and several flume data sets. Transport stage is defined as the non‐dimensional Shields stress divided by its value at the threshold for sediment entrainment. Statistically significant positive correlations between both ripple and dune migration rates and transport stage are found. Stratification of the data by the flow depth to grain‐size ratio improved the amount of variability in migration rates that was explained by transport stage to ca 70%. As transport stage increases for a given depth to grain‐size ratio, migration rates increase. For a given transport stage, the migration rate increases as the flow depth to grain‐size ratio gets smaller. In coarser sediment, bedforms move faster than in finer sediment at the same transport stage. Normalization of dune migration rates by the settling velocity of bed sediment partially collapses the data. Given the large amount of variability that arises from combining data sets from different sources, using different equipment, the partial collapse is remarkable and warrants further testing in the laboratory and field.     

It starts at home? Climate policies targeting household consumption and behavioral decisions are key to low-carbon futures

Through their consumption behavior, households are responsible for 72% of global greenhouse gas emissions. Thus, they are key actors in reaching the 1.5 °C goal under the Paris Agreement. However, the possible contribution and position of households in climate policies is neither well understood, nor do households receive sufficiently high priority in current climate policy strategies. This paper investigates how behavioral change can achieve a substantial reduction in greenhouse gas emissions in European high-income countries. It uses theoretical thinking and some core results from the HOPE research project, which investigated household preferences for reducing emissions in four European cities in France, Germany, Norway and Sweden. The paper makes five major points: First, car and plane mobility, meat and dairy consumption, as well as heating are the most dominant components of household footprints. Second, household living situations (demographics, size of home) greatly influence the household potential to reduce their footprint, even more than country or city location. Third, household decisions can be sequential and temporally dynamic, shifting through different phases such as childhood, adulthood, and illness. Fourth, short term voluntary efforts will not be sufficient by themselves to reach the drastic reductions needed to achieve the 1.5 °C goal; instead, households need a regulatory framework supporting their behavioral changes. Fifth, there is a mismatch between the roles and responsibilities conveyed by current climate policies and household perceptions of responsibility. We then conclude with further recommendations for research and policy.     

An Acetic Acid‐Based Extraction Protocol for the Recovery of U,Th and Pb from Calcium Carbonates for U‐(Th)‐Pb Geochronology

A new method for the simultaneous recovery of U, Th and Pb from ca. 0.5 g calcium carbonate samples for the purpose of U‐(Th)‐Pb geochronometry is presented. The protocol employs ion‐exchange chromatography. Standard anion exchange resin (AG 1‐X8 100–200 mesh) was used as the static phase, and 90% acetic acid was used as the mobile phase to elute the unwanted matrix components; dilute nitric acid was used to elute the U, Th and Pb. Blanks of 1.8 pg Th, 6.4 pg Pb and 8.4 pg U were obtained. The protocol was evaluated by determining the isotopic composition of U‐Th‐Pb separates obtained from an in‐house reference material (prepared from a natural speleothem) by MC‐ICP‐MS. An independently dated speleothem was also reanalysed. Based on these tests, the extraction protocol had an acceptable blank and produced a Pb separate sufficiently free of matrix‐induced instrumental biases to be appropriate for U‐Th‐Pb chronology.     

In-phase anomalies in Beryllium-10 production and palaeomagnetic field behaviour during the Iceland Basin geomagnetic excursion

Increases in the production rate of cosmogenic radionuclides associated with geomagnetic excursions have been used as global tie-points for correlation between records of past climate from marine and terrestrial archives. We have investigated the relative timing of variations in ¹⁰Be production rate and the corresponding palaeomagnetic signal during one of the largest Pleistocene excursions, the Iceland Basin (IB) event (ca. 190 kyr), as recorded in two marine sediment cores (ODP Sites 1063 and 983) with high sedimentation rates. Variations in ¹⁰Be production rate during the excursion were estimated by use of ²³⁰Th_xs normalized ¹⁰Be deposition rates and authigenic ¹⁰Be/⁹Be. Resulting ¹⁰Be production rates are compared with high-resolution records of geomagnetic field behaviour acquired from the same discrete samples. We find no evidence for a significant lock-in depth of the palaeomagnetic signal in these high sedimentation-rate cores. Apparent lock-in depths in other cores may sometimes be the result of lower sample resolution. Our results also indicate that the period of increased ¹⁰Be production during the IB excursion lasted longer and, most likely, started earlier than the corresponding palaeomagnetic anomaly, in accordance with previous observations that polarity transitions occur after periods of reduced geomagnetic field intensity prior to the transition. The lack of evidence in this study for a significant palaeomagnetic lock-in depth suggests that there is no systematic offset between the ¹⁰Be signal and palaeomagnetic anomalies associated with excursions and reversals, with significance for the global correlation of climate records from different archives.     

Patterns of Nd and Sr isotopic ratios produced by magmatic and post-magmatic processes in the Shiant Isles Main Sill, Scotland

The Shiant Isles Main Sill of the British Tertiary Igneous Province is a classic example of a differentiated, alkaline basic sill. Four separate intrusions, each emplaced internally in rapid succession, form a 165-m-thick sill hosted by Lower Jurassic sedimentary rocks. Extensive Nd and Sr isotopic studies were conducted on samples from a vertical section through the sill where the relationships of samples to one another are well defined. The results illuminate patterns of modification of isotopic ratios and clarify the petrogenesis (magma sources, crustal contamination), magmatic processes (bulk mixing, interstitial liquid mixing), and post-magmatic alteration (hydrothermal effects on Sr and Nd). Overall, the whole-rock initial ⁸⁷Sr/⁸⁶Sr ratios range from ∼0.7037 to 0.7061 while initial ¹⁴³Nd/¹⁴⁴Nd ratios vary from ∼0.51243 to 0.51286 (ɛ_Nd∼−0.7 to +5.7) – values that contrast markedly with those of the country rock. Acid leaching (HCl) of the whole-rock samples that removes analcime indicates that most of the scatter in the ⁸⁷Sr/⁸⁶Sr is caused by the ubiquitous sub-solidus, aqueous alteration during which more-radiogenic Sr was introduced into the sill, especially along the margins, and also reveals magmatic isotopic ratios. In contrast, Nd was immobile during fluid interaction so that the sill ¹⁴³Nd/¹⁴⁴Nd ratios were not affected, even <1 m from the country-rock contact. Using leached rock values, ⁸⁷Sr/⁸⁶Sr and ¹⁴³Nd/¹⁴⁴Nd ratios are inversely correlated from magmatic processes. Magmas with two distinct isotopic compositions were involved: a more primitive one with ¹⁴³Nd/¹⁴⁴Nd ∼0.51285 and ⁸⁷Sr/⁸⁶Sr ∼0.7035 that produced the first two intrusions and a more evolved one (with 0.51252 and 0.7048) that produced the third intrusion. Mixing of the two magmas was very limited, restricted to near contacts between units, and apparently occurred by interstitial melt migration. The more evolved crinanitic magma was probably produced from a batch of the more primitive picritic melt by a small degree of crustal contamination and crystal fractionation during a short crustal residence prior to ascent and emplacement. Received: 20 December 1999 / Accepted: 5 May 2000     

Linear and non-linear theory of a parametric instability of hydrodynamic warps in Keplerian discs

We consider the stability of warping modes in Keplerian discs. We find them to be parametrically unstable using two lines of attack, one based on three-mode couplings and the other on Floquet theory. We confirm the existence of the instability and investigate its non-linear development in three dimensions, via numerical experiment. The most rapidly growing non-axisymmetric disturbances are the most nearly axisymmetric (low- m ) ones. Finally, we offer a simple, somewhat speculative model for the interaction of the parametric instability with the warp. We apply this model to the masing disc in NGC 4258 and show that, provided the warp is not forced too strongly, parametric instability can fix the amplitude of the warp.     

Gravitational radiation from strongly magnetized white dwarfs

The magnetic fields of white dwarfs distort their shape generating an anisotropic moment of inertia. A magnetized white dwarf that rotates obliquely relative to the symmetry axis has a mass quadrupole moment that varies in time, so it will emit gravitational radiation. The Laser Interferometer Space Antenna ( LISA ) mission may be able to detect the gravitational waves from two nearby, rapidly rotating white dwarfs.     

Potentiometric titrations of Bacillus subtilis cells to low pH and a comparison of modeling approaches

To provide constraints on the speciation of bacterial surface functional groups, we have conducted potentiometric titrations using the gram-positive aerobic species Bacillus subtilis, covering the pH range 2.1 to 9.8. Titration experiments were conducted using an auto-titrator assembly, with the bacteria suspended in fixed ionic strength (0.01 to 0.3 M) NaClO₄ solutions. We observed significant adsorption of protons over the entire pH range of this study, including to the lowest pH values examined, indicating that proton saturation of the cell wall did not occur under any of the conditions of the experiments. Ionic strength, over the range studied here, did not have a significant effect on the observed buffering behavior relative to experimental uncertainty. Electrophoretic mobility measurements indicate that the cell wall is negatively charged, even under the lowest pH conditions studied. These experimental results necessitate a definition of the zero proton condition such that the total proton concentration at the pH of suspension is offset to account for the negative bacterial surface charge that tends towards neutrality at pH <2.The buffering intensity of the bacterial suspensions reveals a wide spread of apparent pKa values. This spread was modeled using three significantly different approaches: a Non-Electrostatic Model, a Constant Capacitance Model, and a Langmuir-Freundlich Model. The approaches differ in the manner in which they treat the surface electric field effects, and in whether they treat the proton-active sites as discrete functional groups or as continuous distributions of related sites. Each type of model tested, however, provides an excellent fit to the experimental data, indicating that titration data alone are insufficient for characterizing the molecular-scale reactions that occur on the bacterial surface. Spectroscopic data on the molecular-scale properties of the bacterial surface are required to differentiate between the underlying mechanisms of proton adsorption inherent in these models. The applicability and underlying conceptual foundation of each model is discussed in the context of our current knowledge of the structure of bacterial cell walls.     

Age and tectonomagmatic setting of the Eocene Çöpler–Kabataş magmatic complex and porphyry-epithermal Au deposit, East Central Anatolia, Turkey

The Çöpler epithermal Au deposit and related subeconomic porphyry Cu–Au deposit is hosted by the middle Eocene Çöpler–Kabata? magmatic complex in central eastern Anatolia. The intrusive rocks of the complex were emplaced into Late Paleozoic–Mesozoic metamorphosed sedimentary basement rocks near the northeastern margin of the Tauride-Anatolide Block. Igneous biotite from two samples of the magmatic complex yielded ⁴⁰Ar/³⁹Ar plateau ages of 43.75?±?0.26 Ma and 44.19?±?0.23, whereas igneous hornblende from a third sample yielded a plateau age of 44.13?±?0.38. These ages closely overlap with ⁴⁰Ar/³⁹Ar ages of hydrothermal sericite (44.44?±?0.28 Ma) and biotite (43.84?±?0.26 Ma), and Re–Os ages from two molybdenite samples (44.6?±?0.2 and 43.9?±?0.2 Ma) suggesting a short-lived (<1 my) magmatic and hydrothermal history at Çöpler. No suitable minerals were found that could be used to date the epithermal system, but it is inferred to be close in age to the precursor porphyry system. The Çöpler–Kabata? intrusive rocks show I-type calc-alkaline affinities. Their normalized trace element patterns show enrichments in large ion lithophile and light rare earth elements and relative depletions in middle and heavy rare earth elements, resembling magmas generated in convergent margins. However, given its distance from the coeval Eocene Maden–Helete volcanic arc, the complex is interpreted to be formed in a back-arc setting, in response to Paleocene slab roll-back and upper-plate extension. The tectonomagmatic environment of porphyry-epithermal mineralization at Çöpler is comparable to some other isolated back-arc porphyry systems such as Bajo de la Alumbrera (Argentina) or Bingham Canyon (USA).     

RegCM3区域气候模式对中国气候的模拟

使用RegCM3区域气候模式嵌套ERA40再分析资料,对东亚地区进行了15 a（1987-2001年）时间长度的数值积分试验。结果表明：模式可较好地模拟中国地面气温的分布和季节变化,但存在系统性的冷偏差;对降水的变化模拟也较好,但其地理分布模拟存在一定偏差。