Fragmentation Assessment using the FragScan System: Quality of a Blast

Checking the quality of a blast may be considered as subjective. Checking this quality will require measuring objective parameters. One of them is the resulting fragmentation of the blasted product. Numerous fragmentation 'measuring' systems have been developed and marketed, based on image-processing. This presentation of FragScan will illustrate advantages and difficulties when using such a system. FragScan is essentially defending a policy of large and representative sampling. The purpose is to show how fragmentation is discriminating both productivity and profit of quarry operations on a blast-by blast basis. The next step will then be to 'drive' the blasting process to reach a 'better' fragmentation. Other applications require the fragmentation as an essential result: this is the case for large boulders used in structure-reinforcement. Several case-studies have shown that FragScan can be used for quality-control, checking size-distribution of the product according to the requirements of the end-user. Only clear thinking about the precise use of such a 'measurement' will further the success of this task.     

High-temperature deformation in the Neoproterozoic transpressional Ribeira belt, southeast Brazil

The Neoproterozoic Ribeira belt is subdivided in two domains with contrasting tectonic characteristics. The northern domain is dominated by shallowly dipping foliations and orogen-normal thrust tectonics. The southern domain is characterized by a 1000-km-long network of anastomosing transcurrent shear zones parallel to the belt. This contrast is interpreted as reflecting continent–continent convergence that is almost orthogonal to the margins in the northern domain and significantly oblique in the southern domain. The central, transitional, domain of the Ribeira belt displays the northern termination of the transcurrent shear zone network: the Além Paraíba–Pádua shear zone system (APPSS). The 250-km-long Além Paraíba–Pádua system involves granulites facies mylonites deformed through transpression.A detailed study of the microstructure and lattice preferred orientation (LPO) of the rock-forming minerals in these granulite mylonites allow a better understanding of deformation mechanisms active at high temperature in the crust. Plagioclase crystals are plastically deformed; they display curved twins and cleavages, mechanical twins, and evidence of dynamic recrystallization. LPO of plagioclase is consistent with activation of the (010) [100] and (010) [001] slip systems. LPO of orthopyroxene and amphibole indicates that these minerals have been deformed through dislocation creep with the activation of the (100) [001] slip system. Quartz in granulite mylonite displays evidence of extensive growth through grain boundary migration. The LPO of quartz is therefore the result of a static transformation of an initial, syn-kinematic LPO, and cannot be straightforwardly interpreted in terms of deformation mechanisms active during mylonitization.     

Using Synthetic Aperture Radar Imagery for Flood Modelling

Airborne radar technology has traditionally been largely devoted to military applications. In recent years, applications in telecommunications, oil exploration and agriculture have proved that radar technology can also be used commercially. This paper focuses on an application of airborne radar technology in the insurance industry and describes the development of a large-scale flood risk assessment model for the River Thames. The model is based upon airborne Synthetic Aperture Radar (SAR) data and was built with commonly used Geographic Information Systems (GIS) and image processing tools. From the Orthorectified Images (ORIs) a land cover map was produced, from which a surface roughness map could be derived. A Digital Elevation Model (DEM) was processed to remove trees and other soft barriers and obtain the effective ground level. This was achieved by using standard GIS processes. The methodology may be applicable to any organisation exposed to flood risk.     

Evaluation of the SNOWPACK model’s metamorphism and microstructure in Canada: a case study

The snow thermodynamic multi-layer model SNOWPACK was developed to address the risk of avalanches by simulating the vertical properties of snow. Risk and stability assessments are based on the simulation of the vertical variability of snow microstructure, as well as on snow cohesion parameters. Previous research has shown systematic error in grain size simulations (equivalent optical grain size) over several areas in northern Canada. To quantify the simulated errors in snow grain size and uncertainties in stability, the snow specific surface area (SSA) was measured with a laser-based instrument. Optical grain size was retrieved to validate the optical equivalent grain radius from SNOWPACK. The two study plots are located in Glacier National Park, BC, and Jasper National Park, AB, Canada. Profiles for density and stratigraphic analysis were obtained as well as grain size profiles, combined with snow micropenetrometer (SMP) measurements. Density analysis showed good agreement with the simulated values (R² = 0.76). Optical grain size analysis showed systematic overestimation of the modeled values, in agreement with the current literature. The error in SSA evolution for a rounding environment was mostly constant, whereas error for conditions driven by a temperature gradient was linked to the size of the facetted grains.     

Testing the genetic relationship between fluid alteration and brecciation in CM chondrites

Boriskino is a poorly studied CM chondrite with numerous millimeter‐ to centimeter‐scale clasts exhibiting sharp boundaries. Clast textures and mineralogies attest to diverse geological histories with various degrees of aqueous alteration. We conducted a petrographic, chemical, and isotopic study on each clast type of the breccia to investigate if there exists a genetic link between brecciation and aqueous alteration, and to determine the controlling parameter of the extent of alteration. Boriskino is dominated by CM2 clasts for which no specific petrographic type could be assigned based on the chemical compositions and modal abundances of constituents. One clast stands out and is identified as a CM1 lithology, owing to its lack of anhydrous silicates and its overall abundance of dolomite‐like carbonates and acicular iron sulfides. We observe that alteration phases near clast boundaries exhibit foliation features, suggesting that brecciation postdated aqueous alteration. We measured the O‐isotopic composition of Ca‐carbonates and dolomite‐like carbonates to determine their precipitation temperatures following the methodology of Verdier‐Paoletti et al. (2017). Both types of carbonates yield similar ranges of precipitation temperatures independent of clast lithology, ranging from ?13.9 ± 22.4 (2σ) to 166.5 ± 47.3 °C, precluding that temperature alone accounts for the differences between the CM1 and CM2 lithologies. Instead, we suggest that initial water/rock ratios of 0.75 and 0.61 for the CM1 and CM2 clasts, respectively, might control the extent of aqueous alteration. Based on these estimates, we suggest that Boriskino clasts originated from a single parent body with heterogeneous distribution of water either due to local differences in the material permeability or in the initial content of ice available. These conditions would have produced microenvironments with differing geochemical conditions thus leading to a range of degrees of aqueous alteration.     

Spacecraft potential control aboard Equator-S as a test for Cluster-II

The payload of Equator-S was complemented by the potential control device (PCD) to stabilise the electric potential of the spacecraft with respect to the ambient plasma. Low potentials are essential for accurate measurements of the thermal plasma. The design of PCD is inherited from instruments for Geotail and Cluster and utilises liquid metal ion sources generating a beam of indium ions at several keV. The set-up of the instrument and its interaction with the plasma instruments on board is presented. When the instrument was switched on during commissioning, unexpectedly high ignition and operating voltages of some ion emitters were observed. An extensive investigation was initiated and the results, which lead to an improved design for Cluster-II, are summarised. The cause of the abnormal behaviour could be linked to surface contamination of some emitters, which will be monitored and cured by on-board procedures in future. The mission operations on Equator-S were not at all affected, because of the high redundancy built into the instrument so that a sufficient number of perfectly operating emitters were available and were turned on routinely throughout the mission. Observations of the effect of spacecraft potential control on the plasma remained limited to just one event on January 8, 1998, which is analysed in detail. It is concluded that the ion beam lead to the predicted improvement of the particle measurements even outside the low density regions of the magnetosphere where the effect of spacecraft potential control would have been much more pronounced, and that the similar instruments for the four Cluster-II spacecraft to be launched in 2000 will be very important to ensure accurate plasma data from this mission.     

High-resolution modelling of a coastal harbour in the presence of strong tides and significant river runoff

Ocean Dynamics - In the context of Canada’s Ocean Protection Plan (OPP), improved coastal and near-shore modelling is needed to enhance marine safety and emergency response capacity in the...     

The contribution of lateritization processes to the formation of the kaolin deposits from eastern Amazon

The eastern region of the Amazon is home to the most important kaolin bauxite producing district in Brazil, referred to as the Paragominas-Capim kaolin bauxite district, which has a reserve of at least 1.0 billion tons of high-quality kaolin used in the paper coating industry. The kaolin deposits are closely related to sedimentary rocks of the Parnaíba basin and their lateritic cover. Two large deposits are already being mined: IRCC (Ipixuna) and PPSA (Paragominas). The geology of the IRCC mine is comprised of the kaolin-bearing lower unit (truncated mature laterite succession derived from the Ipixuna/Itapecuru formation) and the upper unit (immature lateritized Barreiras formation). The lower kaolin unit is characterized by a sandy facies at the bottom and a soft (ore) with flint facies at the top. It is formed by kaolinite, quartz, some iron oxi-hydroxides, mica and several accessories and heavy minerals. The <2 μm kaolinite crystallites only correspond to 41.3–58.3% of the soft kaolin, and large booklets of 15–300 μm are common. The degree of structure order of kaolinite decreases towards the flint kaolin. The chemical composition of the soft kaolin is similar to the theoretical chemical composition of kaolinite, with low iron content, and can be well correlated to most kaolin deposits in the region. The distribution pattern of chemical elements from sandy to flint kaolin (lower unit) suggests a lateritic evolution and erosive truncation. This is quite distinct from the upper unit, which has a mineralogical and chemical pathway relating it to a complete immature lateritic profile. The geological evolution of the IRCC kaolin is similar to that of other deposits in the eastern Amazon region, being comprised of: parent rocks formed in an estuarine marine and fluvio-laccustrine environment during the early Cretaceous; establishment of mature lateritization with the formation of kaolin in the Eocene; marine transgression and regression – (Pirabas and Barreiras formation) with kaolin profile erosion and forward movement of deferruginization and flintization during the Miocene after partial mangrove covering; and immature lateritization – partial kaolin ferruginization during the Pleistocene.