Une approche innovante pour modéliser la biodégradation des composés organochlorés volatils en aquifères poreux

The goal of this study was to develop an innovative chloroethene biodegradation module based on biological, thermodynamical and mechanistic concepts. The biodegradation scheme was based on the postulate that in each part of an aquifer only one degradation mechanism is dominant: the one involving the most energetic electron acceptor. Thus, the selection of the active degradation mechanism was a function of the concentration of different electron acceptors. Modified Monod-type kinetics was used in order to take into account the possible influence of some compounds on the biodegradation of a given organic compound. The numerical model developed was applied to a simple test case, whose results are presented here. To cite this article: F. Nex et al., C. R. Geoscience 338 (2006).     

Optimization of nonconventional wells under uncertainty using statistical proxies

The determination of the optimal type and placement of a nonconventional well in a heterogeneous reservoir represents a challenging optimization problem. This determination is significantly more complicated if uncertainty in the reservoir geology is included in the optimization. In this study, a genetic algorithm is applied to optimize the deployment of nonconventional wells. Geological uncertainty is accounted for by optimizing over multiple reservoir models (realizations) subject to a prescribed risk attitude. To reduce the excessive computational requirements of the base method, a new statistical proxy (which provides fast estimates of the objective function) based on cluster analysis is introduced into the optimization process. This proxy provides an estimate of the cumulative distribution function (CDF) of the scenario performance, which enables the quantification of proxy uncertainty. Knowledge of the proxy-based performance estimate in conjunction with the proxy CDF enables the systematic selection of the most appropriate scenarios for full simulation. Application of the overall method for the optimization of monobore and dual-lateral well placement demonstrates the performance of the hybrid optimization procedure. Specifically, it is shown that by simulating only 10% or 20% of the scenarios (as determined by application of the proxy), optimization results very close to those achieved by simulating all cases are obtained.     

The effect of thermal treatment on the 57Fe Mössbauer spectrum of beryl

Mössbauer spectra (MS) of blue, green and yellow beryl (ideally Be₃Al₂Si₆O₁₈) containing approximately 1% of iron were obtained at 295 and 500 K. Room temperature (RT) spectra of both blue and green samples showed the presence of an asymmetric Fe²⁺ doublet (ΔE _Q~2.7 mm/s, δ~1.1 mm/s), with a very broad low-velocity peak. There is no clear evidence for the presence of a ferric component. The MS of the yellow sample at RT consists of an intense central absorption with parameters typical for Fe³⁺ (ΔE _Q~0.4 mm/s, δ~0.29 mm/s), plus an apparently symmetrical Fe²⁺ doublet. This sample acquires a light-blue shade upon heating in air at about 620 K. Thermal treatments at high temperatures caused no significant changes in the MS, but the green and yellow beryl acquire a blue colour. All these results are interpreted in relation to the existence of channel water and the distribution of iron among the available crystallographic sites.     

Magnetic properties of a freshly fallen LL ordinary chondrite: the Bensour meteorite

A comprehensive rock magnetic, magnetic anisotropy and paleomagnetic study has been undertaken in the brecciated LL6 Bensour ordinary chondrite, a few months only after its fall on Earth. Microscopic observations and electronic microprobe analyses indicate the presence of Ni-rich taenite, tetrataenite and rare Co-rich kamacite. Tetrataenite is the main carrier of remanence. Magnetization and anisotropy measurements were performed on mutually oriented 125 mm³ sub-samples. A very strong coherent susceptibility and remanence anisotropy is evidenced and interpreted as due to the large impact responsible for the post-metamorphic compaction of this brecciated material and disruption of the parent body. We show that the acquisition of remanent magnetization postdates metamorphism on the parent body and predates the entering of the meteorite in Earth’s atmosphere. Three components of magnetization could be isolated. A soft coherent component is closely related to the anisotropy of the meteorite and is interpreted as a shock remanent magnetization acquired during the same large impact on the parent body. Two harder components show random directions at a few mm scale. This randomness is attributed either to the formation mechanism of tetrataenite or to post-metamorphic brecciation. All components are likely acquired in very low (≈μT) to null ambient magnetic field, as demonstrated by comparison with demagnetization behavior of isothermal remanent magnetization. Two other LL6 meteorites, Kilabo and St-Mesmin, have also been studied for comparison with Bensour.     

Indoor Radon Radioactivity at the University of Brunei Darussalam

— Indoor radon radioactivity in the rooms on the ground floor and first floor of the Physics Department, Faculty of Science, Universiti Brunei Darussalam was measured using a system that consists of an air filter pump, ZnS detector, photomultiplier tube and counter. Ground floor rooms' radon radioactivity was found to be about three times higher than that of the first floor. The maximum ground floor indoor radioactivity is only 0.39 Bqm^?3, a value relatively low and safe compared to the mean outdoor radon concentration of 1.41 Bqm^?3 measured (HU and TAN, 2000). The main source of radon emanation originates from the ground soil rather than the building materials.     

Rivers, chemical weathering and Earth's climate

We detail the results of recent studies describing and quantifying the large-scale chemical weathering of the main types of continental silicate rocks: granites and basalts. These studies aim at establishing chemical weathering laws for these two lithologies, describing the dependence of chemical weathering on environmental parameters, such as climate and mechanical erosion. As shown within this contribution, such mathematical laws are of primary importance for numerical models calculating the evolution of the partial pressure of atmospheric CO₂ and the Earth climate at geological timescales. The major results can be summarized as follow: (1) weathering of continental basaltic lithologies accounts for about 30% of the total consumption of atmospheric CO₂ through weathering of continental silicate rocks. This is related to their high weatherability (about eight times greater than the granite weatherability); (2) a simple weathering law has been established for basaltic lithologies, giving the consumption of atmospheric CO₂ as a function of regional continental runoff, and mean annual regional temperature; (3) no such simple weathering law can be proposed for granitic lithologies, since the effect of temperature can only be identified for regions displaying high continental runoff; (4) a general law relating mechanical erosion and chemical weathering has been validated on small and large catchments. The consequences of these major advances on the climatic evolution of the Earth are discussed. Particularly, the impacts of the onset of the Deccan trapps and the Himalayan orogeny on the global carbon cycle are reinvestigated. To cite this article: B. Dupré et al., C. R. Geoscience 335 (2003).     

Nickel speciation in Sebertia acuminata,a plant growing on a lateritic soil of New Caledonia

Nickel speciation in a nickel hyperaccumulating plant (Sebertia acuminata) and its associated soil of southern New Caledonia was studied using various analytical methods. The soil is formed of iron oxides (goethite, hematite), which contain almost all the nickel. The available nickel is probably linked to the organic matter in the litter. Sebertia acuminata, acts as a nickel pump, and concentrates the metal in its leaves. It partitions nickel and silica; nickel is concentrated in the cells (probably in the vacuoles) as organometallic complexes, whereas silica forms the framework of the cells, and the phytolithes. A thorough study of these plants seems essential in order to define the soil–plant relations, and to propose appropriate ways for ecological restoration. To cite this article: N. Perrier et al., C. R. Geoscience 336 (2004).     

The Okavango giant mafic dyke swarm (NE Botswana): its structural significance within the Karoo Large Igneous Province

The structural organization of a giant mafic dyke swarm, the Okavango complex, in the northern Karoo Large Igneous Province (LIP) of NE Botswana is detailed. This N110°E-oriented dyke swarm extends for 1500 km with a maximum width of 100 km through Archaean basement terranes and Permo-Jurassic sedimentary sequences. The cornerstone of the study is the quantitative analysis of N>170 (exposed) and N>420 (detected by ground magnetics) dykes evidenced on a ca. 80-km-long section lying in crystalline host-rocks, at high-angle to the densest zone of the swarm (Shashe area). Individual dykes are generally sub-vertical and parallel to the entire swarm. Statistical analysis of width data indicates anomalous dyke frequency (few data <5.0 m) and mean dyke thickness (high value of 17 m) with respect to values classically obtained from other giant swarms. Variations of mean dyke thicknesses from 17 (N110°E swarm) to 27 m (adjoining and coeval N70°E giant swarm) are assigned to the conditions hosting fracture networks dilated as either shear or pure extensional structures, respectively, in response to an inferred NNW–SSE extension. Both fracture patterns are regarded as inherited brittle basement fabrics associated with a previous (Proterozoic) dyking event. The Okavango N110°E dyke swarm is thus a polyphase intrusive system in which total dilation caused by Karoo dykes (estimated frequency of 87%) is 12.2% (6315 m of cumulative dyke width) throughout the 52-km-long projected Shashe section. Assuming that Karoo mafic dyke swarms in NE Botswana follow inherited Proterozoic fractures, as similarly applied for most of the nearly synchronous giant dyke complexes converging towards the Nuanetsi area, leads us to consider that the resulting triple junction-like dyke/fracture pattern is not a definitive proof for a deep mantle plume in the Karoo LIP.     

Thallium diagenesis in lacustrine sediments

Dated sediment cores and porewaters from two Canadian Shield lakes, located 40 km from Québec City (L. Tantaré) and 25 km downwind from an important smelter in northwestern Québec (L. Vose), were analyzed for thallium and other geochemical variables. Atmospheric deposition is the only source of anthropogenic Tl to these lakes. The porewater Tl concentration profiles in L. Tantaré display a peak below the sediment-water interface that suggests post-depositional Tl remobilization and transport to the overlying water and deeper sediments; such a dissolved Tl peak occurs just above the sediment-water interface in L. Vose. Modeling the porewater Tl profiles with a diagenetic reaction-transport equation reveals a zone of dissolved Tl production lying above a zone of Tl consumption in L. Tantaré sediments. In contrast, in L. Vose, Tl diffuses across the sediment-water interface from the anoxic hypolimnion and is fixed to the surficial sediments. The localization of the consumption zones, the shape of the dissolved Tl, sulfide and iron profiles, as well as calculations of saturation states are all consistent with the removal of Tl from porewater by co-precipitation with and/or adsorption to Fe sulfides. The concentrations of Tl removed from or added to sediments after their deposition (i.e., diagenetic Tl) amount to up to 36% of measured sediment Tl concentrations. Comparison of the reconstructed historical Tl records with those of polycyclic aromatic hydrocarbons (PAHs) and of Pb originating from coal burning or from smelting activities indicate that coal combustion is the major source of atmospheric Tl to L. Tantaré and that an additional important Tl source to L. Vose is the nearby smelter.