Structural and tectonothermal evolution of the ultrahigh-temperature Bakhuis Granulite Belt,Guiana Shield,Surinam:Palaeoproterozoic to recent

We constrain the multistage tectonic evolution of the Palaeoproterozoic UHT metamorphic(P=0.9–1.0 GPa,T>1000℃,t=2088–2031 Ma)Bakhuis Granulite Belt(BGB)in Surinam on the Guiana Shield,using large-to small-scale structures,Al-in-hornblende thermobarometry and published fluid inclusion and zircon geochronological data.The BGB forms a narrow,NE–SW striking belt between two formerly connected,~E–W oriented granite-greenstone belts,formed between converging Amazonian and West African continental masses prior to collision and Transamazonian orogeny.Inherited detrital zircon in BGB metasediments conforms agewise to Birimian zircon of West Africa and suggests derivation from the subsequently subducted African passive margin.Ultrahigh-temperature metamorphism may have followed slab break-off and asthenospheric heat advection.Peak metamorphic structures result from layer-parallel shearing and folding,reflecting initial transtensional exhumation of the subducted African margin after slab break-off.A second HT event involves intrusion,at ca.0.49 GPa,of charnockites and metagabbros at 1993–1984 Ma and a layered anorthosite at 1980 Ma,after the BGB had already cooled to<400℃.The event is related to northward subduction under the greenstone belts,along a new active margin to their south.A pronounced syntaxial bend in the new margin points northward towards the BGB and is likely the result of indentation by an anticlinorial flexural bulge of the subducting plate.Tearing of the subducting oceanic plate along this bulge explains why the charnockites are restricted to the BGB.The BGB subsequently experienced doming under an extensional detachment exposed in its southwestern border zone.Exhumation was focused in the BGB as a result of the flexural bulge in the subducting plate and localised heating of the overriding plate by charnockite magmatism.The present,straight NE–SW long-side boundaries of the BGB are superimposed mylonite zones,overprinted by pseudotachylites,previously dated at ca.1200 Ma and 950 Ma,respectively.The 1200 Ma mylonites reflect transpressional popping-up of the BGB,caused by EW-directed intraplate principal compressive stresses from Grenvillian collision preserved under the eastern Andes.Further exhumation of the BGB involved the 950 Ma pseudotachylite decorated faulting,and Phanerozoic faulting along reactivated Meso-and Neoproterozoic lineaments.     

New results concerning the pedo- and chronostratigraphy of the loess–palaeosol sequence Attenfeld (Bavaria,Germany) derived from a multi-methodological approach

Loess–palaeosol sequences (LPS) represent important records of palaeoenvironmental dynamics throughout the Quaternary. During the Pleistocene's dry and cold phases, the Danube's riverbed was one of the major sources for loess sediments that built up LPS in southern Germany and southeastern Europe. Surprisingly, studies addressing Bavarian LPS along the Danube River often lack actuality. The Attenfeld site was one of them and is often cited as a typical LPS. Nevertheless, the site's previous interpretations are based on a few empirical data and field observations. Considering the site's closeness to the sediment's source area, the Alps, and the region's importance in Middle and Upper Palaeolithic migrational movements, those former renditions needed an evaluation. Therefore, we applied a multi-proxy approach (including analyses of grain-size distribution, element composition, and sediment colour attributes) combined with optically stimulated luminescence. Based on our findings, we conclude that the Attenfeld site's former interpretations might be too generalised. We identified units that were not mentioned by previous studies (e.g. Early Glacial dark greyish horizon). Field observations, sediment characteristics, and age estimates indicate sediment deposition of the dated units partly before MIS 4, which contrasts with previous interpretations. The results further demonstrate how sensitive LPS are to environmental settings and dynamics.     

Multi-angle backscatter classification and sub-bottom profiling for improved seafloor characterization

This study applies three classification methods exploiting the angular dependence of acoustic seafloor backscatter along with high resolution sub-bottom profiling for seafloor sediment characterization in the Eckernförde Bay, Baltic Sea Germany. This area is well suited for acoustic backscatter studies due to its shallowness, its smooth bathymetry and the presence of a wide range of sediment types. Backscatter data were acquired using a Seabeam1180 (180 kHz) multibeam echosounder and sub-bottom profiler data were recorded using a SES-2000 parametric sonar transmitting 6 and 12 kHz. The high density of seafloor soundings allowed extracting backscatter layers for five beam angles over a large part of the surveyed area. A Bayesian probability method was employed for sediment classification based on the backscatter variability at a single incidence angle, whereas Maximum Likelihood Classification (MLC) and Principal Components Analysis (PCA) were applied to the multi-angle layers. The Bayesian approach was used for identifying the optimum number of acoustic classes because cluster validation is carried out prior to class assignment and class outputs are ordinal categorical values. The method is based on the principle that backscatter values from a single incidence angle express a normal distribution for a particular sediment type. The resulting Bayesian classes were well correlated to median grain sizes and the percentage of coarse material. The MLC method uses angular response information from five layers of training areas extracted from the Bayesian classification map. The subsequent PCA analysis is based on the transformation of these five layers into two principal components that comprise most of the data variability. These principal components were clustered in five classes after running an external cluster validation test. In general both methods MLC and PCA, separated the various sediment types effectively, showing good agreement (kappa >0.7) with the Bayesian approach which also correlates well with ground truth data (r²?>?0.7). In addition, sub-bottom data were used in conjunction with the Bayesian classification results to characterize acoustic classes with respect to their geological and stratigraphic interpretation. The joined interpretation of seafloor and sub-seafloor data sets proved to be an efficient approach for a better understanding of seafloor backscatter patchiness and to discriminate acoustically similar classes in different geological/bathymetric settings.     

Carbon Dioxide in igneous petrogenesis: I

A number of experimental CO₂ solubility data for silicate and aluminosilicate melts at a variety of P- T conditions are consistent with solution of CO₂ in the melt by polymer condensation reactions such as SiO _4(m ^4? +CO_2(v)+Si _n O _3n+1(m) ⁽²ⁿ⁺¹⁾ ?Si _n+1O _3n+4(m) ^(2n+4)? +CO _3(m ^)2? . For various metalsilicate systems the relative solubility of CO₂ should depend markedly on the relative Gibbs free change of reaction. Experimental solubility data for the systems Li₂O-SiO₂, Na₂O-SiO₂, K₂O-SiO₂, CaO-SiO₂, MgO-SiO₂ and other aluminosilicate melts are in complete accord with predictions based on Gibbs Free energies of model polycondesation reactions. A rigorous thermodynamic treatment of published P- T-wt.% CO₂ solubility data for a number of mineral and natural melts suggests that for the reaction CO_2(m) ? CO_2(v)

1. CO₂-melt mixing may be considered ideal (i.e., { \(a_{{\text{CO}}_{\text{2}} }^m = X_{{\text{CO}}_{\text{2}} }^m \) );
2. \(\bar V_{{\text{CO}}_{\text{2}} }^m \) , the partial molal volume of CO₂ in the melt, is approximately equal to 30 cm³ mole^?1 and independent of P and T;
3. Δ C _p ⁰ is approximately equal to zero in the T range 1,400° to 1,650 °C and
4. enthalpies and entropies of the dissolution reaction depend on the ratio of network modifiers to network builders in the melt. Analytic expressions which relate the CO₂ content of a melt to P, T, and \(f_{{\text{CO}}_{\text{2}} } \) for andesite, tholeiite and olivine melilite melts of the form

$$\ln X_{{\text{CO}}_{\text{2}} }^m = \ln f_{{\text{CO}}_{\text{2}} } - \frac{A}{T} - B - \frac{C}{T}(P - 1)$$ have been determined. Regression parameters are (A, B, C): andesite (3.419, 11.164, 0.408), tholeiite (14.040, 5.440,0.393), melilite (9.226, 7.860, 0.352). The solubility equations are believed to be accurate in the range 3<P<30 kbar and 1,100°<T<1,650 °C. A series of CO₂ isopleth diagrams for a wide range of T and P are drawn for andesitic, tholeiitic and alkalic melts.     

Relations between metamorphism and orogeny in a typical section of the Indian Himalayas

Summary A comprehensive geological and petrological investigation has been undertaken in an area of about 10 000 km² in the Indian Himalaya (S-Lahul, Himachal Pradesh). The development of mineral assemblages in metamorphic rocks of medium grade is considered to be a dominant Alpine event, although almost exclusively Paleozoic and Precambrian rocks have been involved. The Barrowian type of this metamorphism, ranging from the anchi- to the sillimanite zone, took place under the elavated T-gradient of about 4°C/100 m. It is suggested that normal geothermal conditions prevailed only in the outermost zone of this orogenic belt. In the Late Tertiary this metamorphic series has been moved as a huge nappe upon the Lower Himalaya. During this process a unique feature of reverse metamorphism has been formed. It can be shown that this feature was caused by a combination of metamorphism and very rapid tectonic movements.

---

Beziehungen zwischen Metamorphose und Orogenese in einem typischen Querschnitt des Indischen Himalaya

Zusammenfassung Ein etwa 10 000 km² großes Gebiet des Indischen Himalaya (S-Lahul, Himachal Pradesh) wurde einer umfassenden geologischen und petrographischen Bearbeitung unterzogen. Die Ausbildung der in den mittelgradig metamorphen Gesteinen vorliegenden Mineralparagenesen wird als ein dominant alpines Ereignis betrachtet, obwohl fast nur paläozoische und präkambrische Gesteine einbezogen wurden. Die Metamorphose selbst ist von Barrow-Typus und reicht von der Anchi- bis zur Sillimanitzone. Sie fand unter einem erhöhten Temperaturgradienten von etwa 4°C/100 m statt. Nur in der äußersten Zone des Orogens entsprach der Gradient etwa normalen geothermischen Verhältnissen. Im Spättertiär wurde diese alpin-metamorphe Serie in Form einer mächtigen Kristallindecke dem Niedrigen Himalaya aufgeschoben. Dabei wurde eine einzigartige Zone inverser Metamorphose ausgebildet. Es konnte gezeigt werden, daß diese inverse Metamorphose durch das Zusammenwirken von Metamorphose und sehr rasch ablaufender Tektonik entstand.

---

---

With 13 Figures

---

Dedicated to Prof. Dr. Dr. h. c.B. Sander on the occasion of his 90th birthday.     

Gold partitioning in melt-vapor-brine systems

We used laser-ablation inductively coupled plasma mass spectrometry to measure the solubility of gold in synthetic sulfur-free vapor and brine fluid inclusions in a vapor + brine + haplogranite + magnetite + gold metal assemblage. Experiments were conducted at 800°C, oxygen fugacity buffered at Ni-NiO (NNO), and pressures ranging from 110 to 145 MPa. The wt% NaCl eq. of vapor increases from 2.3 to 19 and that of brine decreases from 57 to 35 with increasing pressure. The composition of the vapors and brines are dominated by NaCl + KCl + FeCl₂ + H₂O. Gold concentrations in vapor and brine decrease from 36 to 5 and 50 to 28 μg/g, respectively, and the calculated vapor:brine partition coefficients for gold decrease from 0.72 to 0.17 as pressure decreases from 145 to 110 MPa. These data are consistent with the thermodynamic boundary condition that the concentration of gold in the vapor and brine must approach a common value as the critical pressure is approached along the 800°C isotherm in the NaCl-KCl-FeCl₂-HCl-H₂O system.We use the equilibrium constant for gold dissolution as AuOH⁰, extrapolated from lower temperature and overlapping pressure range, to calculate expected concentrations of AuOH⁰ in our experimental vapors. These calculations suggest that a significant quantity of gold in our experimental vapors is present as a non-hydroxide species. Possible chloridogold(I) species are hypothesized based on the positively correlated gold and chloride concentrations in our experimental vapors. The absolute concentration of gold in our synthetic vapor, brine, and melt and calculated mass partition coefficients for gold between these physicochemically distinct magmatic phases suggests that gold solubility in aqueous fluids is a function of aqueous phase salinity, specifically total chloride concentration, at magmatic conditions. However, though we highlight here the effect of salinity, the combination of our data with data sets from lower temperatures evinces a significant decrease in gold solubility as temperature drops from 800°C to 600°C. This decrease in solubility has implications for gold deposition from ascending magmatic fluids.     

Blue amphibole-albite-chlorite assemblages from Fuscaldo (S Italy) and the role of glaucophane in metamorphism

The Fuscaldo assemblages show that in metabasites suitable for the production of glaucophane at higher pressures, amphibole poor(er) in Gl-molecule + albite + Al-rich chlorite is formed at lower pressure. Blue amphibole formed together with albite, chlorite and a Ca-silicate appears to have a fixed content of the Gl-molecule and of Ca²⁺, apart from the Fe²⁺/ R²⁺ ratio, which varies with host rock chemistry. The constant Gl-content indicates attainment of equilibrium, and is a function of T and especially P, so it may be used as a geobarometer. Glaucophane generally forms at the cost of albite+chlorite. In a P-T diagram the reaction is probably situated somewhat below the reaction albitejadeite+quartz, and has a smaller slope than the latter. The concomitant high-pressure character of glaucophane justifies reintroduction of Eskola's glaucophane-schist facies, of which glaucophane is critical.     

Submarine hydrothermal activity and gold-rich mineralization at Brothers Volcano, Kermadec Arc, New Zealand

Brothers volcano, of the Kermadec intraoceanic arc, is host to a hydrothermal system unique among seafloor hydrothermal systems known anywhere in the world. It has two distinct vent fields, known as the NW Caldera and Cone sites, whose geology, permeability, vent fluid compositions, mineralogy, and ore-forming conditions are in stark contrast to each other. The NW Caldera site strikes for ??600?m in a SW?CNE direction with chimneys occurring over a ??145-m depth interval, between ??1,690 and 1,545?m. At least 100 dead and active sulfide chimney spires occur in this field and are typically 2?C3?m in height, with some reaching 6?C7?m. Their ages (at time of sampling) fall broadly into three groups: <4, 23, and 35?years old. The chimneys typically occur near the base of individual fault-controlled benches on the caldera wall, striking in lines orthogonal to the slopes. Rarer are massive sulfide crusts 2?C3?m thick. Two main types of chimney predominate: Cu-rich (up to 28.5?wt.% Cu) and, more commonly, Zn-rich (up to 43.8?wt.% Zn). Geochemical results show that Mo, Bi, Co, Se, Sn, and Au (up to 91?ppm) are correlated with the Cu mineralization, whereas Cd, Hg, Sb, Ag, and As are associated with the dominant Zn-rich mineralization. The Cone site comprises the Upper Cone site atop the summit of the recent (main) dacite cone and the Lower Cone site that straddles the summit of an older, smaller, more degraded dacite cone on the NE flank of the main cone. Huge volumes of diffuse venting are seen at the Lower Cone site, in contrast to venting at both the Upper Cone and NW Caldera sites. Individual vents are marked by low-relief (??0.5?m) mounds comprising predominately native sulfur with bacterial mats. Vent fluids of the NW Caldera field are focused, hot (??300°C), acidic (pH????2.8), metal-rich, and gas-poor. Calculated end-member fluids from NW Caldera vents indicate that phase separation has occurred, with Cl values ranging from 93% to 137% of seawater values. By contrast, vent fluids at the Cone site are diffuse, noticeably cooler (??122°C), more acidic (pH?1.9), metal-poor, and gas-rich. Higher-than-seawater values of SO₄ and Mg in the Cone vent fluids show that these ions are being added to the hydrothermal fluid and are not being depleted via normal water/rock interactions. Iron oxide crusts 3?years in age cover the main cone summit and appear to have formed from Fe-rich brines. Evidence for magmatic contributions to the hydrothermal system at Brothers includes: high concentrations of dissolved CO₂ (e.g., 206?mM/kg at the Cone site); high CO₂/³He; negative ??D and ??¹⁸O_H2O for vent fluids; negative ??³⁴S for sulfides (to ?4.6??), sulfur (to ?10.2??), and ??¹⁵N₂ (to ?3.5??); vent fluid pH values to 1.9; and mineral assemblages common to high-sulfidation systems. Changing physicochemical conditions at the Brothers hydrothermal system, and especially the Cone site, occur over periods of months to hundreds of years, as shown by interlayered Cu?+?Au- and Zn-rich zones in chimneys, variable fluid and isotopic compositions, similar shifts in ³He/⁴He values for both Cone and NW Caldera sites, and overprinting of ??magmatic?? mineral assemblages by water/rock-dominated assemblages. Metals, especially Cu and possibly Au, may be entering the hydrothermal system via the dissolution of metal-rich glasses. They are then transported rapidly up into the system via magmatic volatiles utilizing vertical (??2.5?km long), narrow (??300-m diameter) ??pipes,?? consistent with evidence of vent fluids forming at relatively shallow depths. The NW Caldera and Cone sites are considered to represent stages along a continuum between water/rock- and magmatic/hydrothermal-dominated end-members.