Organic geochemical studies of a Messinian evaporitic basin,northern Apennines (Italy) I: Hydrocarbon biological markers for a hypersaline environment

This paper describes the occurrence and significance of hydrocarbons present in two bituminous marl layers and one distinct gypsum layer from a Messinian sedimentary basin, where hypersaline conditions prevailed. Several new compounds were detected and tentatively identified: of these 20R and 20S 4α, 24-dimethyl-5α(H),14β(H),17β(H) and 20R and 20S 4β,24-dimethyI-5α(H),14β(H),17β(H) cholestanes; 4-methylspirosterenes; 4,4-dimethyl-5α(H),14β(H),17β(H) pregnanes and homopregnanes are discussed in this paper. Several of these compounds might be considered as biological markers for a (hyper)saline environment. The short side chain 4-desmethylsteranes, 5α(H),14β(H),17β(H), 5α(H),14β(H),17α(H) and 5α(H),14α(H), 17α(H) pregnanes and homopregnanes, are the most abundant compounds in the extract from the gypsum sample. It is suggested that in this case these compounds do not reflect the stage of diagenesis but are related to certain organisms exclusively occurring in hypersaline environments. In addition the very low pristane/phytane ratio, often considered as an indicator for anoxicity, could also be interpreted as a useful indicator for hypersalinity.     

An57Fe mössbauer effect study of ankerite

A natural sample of ankerite has been characterized by chemical analysis, X-ray diffraction and differential thermal analysis. The composition was found to be (Ca_1.11Mg_0.50Fe_0.33Mn_0.09) [Co₃]_1.99.⁵⁷Fe Mössbauer effect measurements were performed at temperatures between 4.2 and 400 K. At low temperatures (T < 25 K) relaxation effects are clearly dominant. The temperature dependence of the center shift is remarkably well reproduced by a model based on the Debije approximation of the lattice vibrations. In contrast, the temperature dependence of the quadrupole splitting cannot be described by any reasonable crystal field model. It is argued that an orbit-lattice coupling might explain the observed quadrupole splittings. A spectrum recorded in an applied field of 6 T reveals a positive electric field gradient from which an orbital doublet ground state is concluded. Highly anisotropic field reductions are derived but cannot be quantitatively explained due to a lack of knowledge concerning the magnetic structure of ankerite. The line widths decrease significantly with increasing temperature which is only partly due to the decreasing Mössbauer fraction.     

Error analysis in hypocentral locations at Phlegraean Fields

The location reliability of the earthquakes occurred at Phlegraean Fields has been analyzed, and the theoretical errors, inferred from the diagonal elements of the covariance matrix, have been estimated. Using only first P-phase arrivals to the local network (22 stations) and assuming a reading error of 0.05 sec., the average error on the spatial coordinates is estimated to be of the order of 0.2 km.Shallow events (depth<1 km) are very poorly constrained in depth at the borders of the network. The use of both P and S arrival times, recorded by a smaller three component network (10 stations), improves the depth determination.Further analysis has been performed on a set of about 350 selected earthquakes, using two different velocity models.Differences in depth considerably greater than the theoretical errors, and showing highly different patterns have been found.Tests with artificial events, randomly distributed in space, indicate that the observed depth distribution is essentially due to the used velocity model.     

Hydraulics of runoff and loess loam deposition

On many more or less loamy soils, rill erosion is reported to start on slopes that are equal to or steeper than 2–3°; critical Froude numbers for the start of rill wash on these slopes vary between 2·0 and 3·0. This explains why colluvial deposition often occurs on slopes below 2–3°, when water spreads out at the downslope extremities of the rills. The critical hydraulic conditions for loess loam deposition were tested in the laboratory for slopes of 0·5° and 2°, applying unit-discharges (q) up to 10 cm²/s. It appeared from these experiments that for afterflow, without raindrop impact, deposition starts for critical load concentrations (c_cr) varying between several g/1 and about 60 g/l. Under rain c_cr amounts to a minimum value of 100–125 g/l and it increases when the runoff film becomes thinner. Nevertheless, deposition in pluvial runoff is also possible, as was the case during the Weichselian, according to data from quarries in Belgium and in The Netherlands. A modified Kalinske equation is proposed for c_cr prediction, with the introduction of a typical empirical coefficient C_r and considering such factors as shear stress and mean particle size. Massive sedimentation may occur when it stops raining and afterflow starts, since c_cr values are then much lower. It is shown from the Shields' diagram that loamy suspensions are more sensitive to sedimentation than sands in clear water.     

K-Ar ages of basic rocks in the Patia Valley, southwest Colombia

The Patia Valley situated between the Western and Central Cordilleras of the southwest Colombian Andes contains two areas in which Mesozoic basic and ultrabasic rocks crop out in abundance. Late Cretaceous Diabase Group pillow basalts which make up much of the Western Cordillera are at least 81 ± 5 Ma in the E1 Tambo-E1 Peñol area. 105-97 Ma hornblende and whole-rock dates from the ophiolitic Los Azules complex indicate an Albian age of formation, although many dates are lower (65-62 Ma) owing the low-grade ocean-floor metamorphism. The metamorphic age distribution here supports an end of Cretaceous emplacement for the complex rather than the Early-Mid Cretaceous emplacement suggested for North Colombian ophiolites similarly aligned along the Romeral fault system. Tertiary dacites intruding the Low Azules complex are 36-15 Ma.     

Evolution of polycyclic alkanes in the Espirito Santo Basin

The distributions of polycyclic alkanes were monitored in a Neocomian sequence (well 1-ESS-34) from the Espirito Santo Basin, southeast Brazil. The profiles included, apart from regular hopanes, significant concentrations of 18α(H), 28,30-bisnorhopane and subordinate amounts of gammacerane. Sterane concentrations, normally with hopane/sterane <5, were compatible with other geochemical data indicating a predominantly planktonic/microbial source of the deposited organic matter. Sample maturities ranged from very immature to the onset of oil generation, allowing biomarker distributions to be followed along a broad maturation range. The ability of certain molecular ratios (e.g. C₂₇ 17α(H)/17β(H)hopanes) to reflect a maturity sequence with depth in the closely-spaced strata of the immature upper levels (Jiquiá Stage) showed the value of molecular techniques over classical geochemical methods (e.g. vitrinite reflectance) for the study of immature sequences. The presence in the oils of southern Espirito Santo of 28,30-bisnorhopane, gammacerane and methyl steranes in similar concentrations as in extracts of the deepest levels of the 1-ESS-34 well qualify the Jiquia Stage as the probable source rock of oils accumulated in the basin.     

Bacterial contribution to sedimentary organic matter; a comparative study of lipid moieties in bacteria and Recent sediments

A systematic study of the lipid composition of thirteen bacterial species and three Recent sediments (methanogenic sediment, cyanobacterial mat and evaporative gypsum crust) was undertaken in an attempt to recognize bacterial organic matter in sediments. A sequential method, which distinguishes between three different modes of occurrence of lipid moieties (free, OH⁻- and H⁺-labile), was applied. The acid-labile fractions are discussed.The three main groups of bacteria, archaebacteria, gram-positive eubacteria and gram-negative eubacteria, are easily distinguished. Methanogenic and extremely halophilic archaebacteria are characterized by the presence of diphytanyl glyceryl ether and the absence of fatty acids. The gram-positive eubacteria contain primarily iso- and anteiso-branched fatty acids whereas the gram-negative bacteria and sediments are dominated by β- and α-hydroxy fatty acids. A wide variety of H⁺-labile hydroxy fatty acids was observed which included several, as yet unknown, structures.β-Hydroxy fatty acids in this H⁺-labile mode of occurrence are exclusively present in bacteria. Their distribution patterns in sediments are considered “fingerprints” of past and present bacterial populations. The specific differences in β -hydroxy fatty acid compositions observed in the different bacteria and the three sediments investigated, suggest that amide-linked β-hydroxy fatty acid patterns are useful as markers of bacterial populations and therefore of environmental conditions.     

Coastal slope terracing and relative sea-level changes: Deductions based on computer simulations

Although a traditional geological survey of terraced coastal slopes is an essential part of studies aimed to reconstruct relative sea-level changes, the stratigraphic and chronological data so obtained frequently prove inadequate to completely unravel the sometimes very complex history of sea-level fluctuation, especially where erosion has prevailed over deposition and/or deposits are difficult to date. On the basis of our experience we think that much additional information can be gained through geomorphological interpretation of the profiles of those slopes. In order to facilitate such interpretation, a computer simulation model is developed that is able to predict the morphogenic response to a variety of possible relative-sea-level histories. The results can be used to envisage some new interpretation keys for the analysis of real situations and, hopefully, as bases for the conception of general models of coastal slope evolution under the action of a variable sea level. Though preliminary, the results so far obtained permit identification of the geomorphological consequences (in terms of resulting slope profile) of ordered successions of transgressions and regressions of different amplitude, rate, order and style. Moreover they provide interesting insights into the role that different styles of tectonic uplift may play in the phenomenon of multiple terracing of coastal slopes.     

Effects of soil moisture dynamics on slope failure at Hyrum Reservior,Utah

Field observations of shoreline conditions at Hyrum Reservoir, Utah, were conducted during the summers of 1991 to 1993. A process of bluff retreat is described for a multiple-layered bluff environment of sand and clay layers. Failure is initiated by wetting and drying of clay sediments, which produces horizontal cracks within bluff material. These cracks appear to penetrate to a depth of approximately 100-150 mm before initiating vertical cracking in the sediments. The vertical cracks are propagated by continued drying of the surface sediment, ultimately leading to failure of the bluff material. The physical dimensions of sediment blocks succumbing to this mechanism range from a few hundred millimetres up to 3 m on a side, with a depth of approximately 100-150 mm. The mechanism described here appears to operate optimally when the supply of subsurface moisture is abundant and nearly continuous throughout the spring and early summer. Reservoir draw-down, large capillary fringe effects in the bluff and periodic wetting from upslope undrained hollows are the dominant moisture controls at this site. Moisture delivery to the face is strongly influenced by anisotropy of saturated hydraulic conductivity in the alternating clay and sand layers and related differences in sediment texture.     

Understanding the inelastic seismic behaviour of asymmetric-plan buildings

Studied in this paper is the inelastic seismic behaviour of asymmetric-plan buildings using the histories of base shear and torque. The first step in understanding this behaviour is to construct the base shear and torque surface (BST) for the building, which represents all combinations of shear and torque that applied statically lead to collapse of the structure. Several factors controlling the shape of this surface, such as strength eccentricity and bidirectional ground motion, are identified. Also, their effects on the building responses are studied considering several structural configurations. The results obtained show that the BST surface, in conjunction with the base-shear and torque histories, provides a useful conceptual framework for understanding the behaviour of asymmetric systems. Furthermore, using these surfaces, relevant aspects of the behaviour and design of such buildings become apparent even before dynamic analysis of the structure.