New species of benthopelagic copepod Xantharus (Calanoida: Scolecitrichidae) from the upper slope,eastern central New Zealand

Xantharus Andronov, 1981 is reported, for the first time from New Zealand, from the upper slope (306 m) off the southeastern coast of North Island (41°04.10′S, 176°22.05′E). Xantharus cryeri n. sp. females differ from the three known species by a combination of characters: antennules that extend to the distal border of pedigerous somite 2; ancestral segment XVIII of the antennule with 1 seta; mandible basis with 3 setae; maxilla endite 1 with 5 setae; leg 1 basis with inner distal border lined with small spinules; and leg 5 is squat, with all segments as long as wide and the 2 terminal spine‐like extensions of the terminal segment approximately as long as the articulated, inner, subterminal spine.     

Uptake of palytoxin‐like compounds by shellfish fed Ostreopsis siamensis (Dinophyceae)

Abstract

Greenshell? mussels (Perna canaliculus Gmelin), scallops (Pecten novaezealandiae Reeve), and Pacific oysters (Crassostrea gigas Thunberg) were fed with a New Zealand strain of mass cultured Ostreopsis siamensis Schmidt (for 27 and 84 h and with 1.5 × 10⁶ or 8.6 × 10⁶ cells, respectively) under laboratory conditions. The microalgal cells contained 0.3 pg palytoxin equivalents cell^–1 (as determined by the haemolysis neutralisation assay (HNA) of Bignami (1993)) and extracts of these cells were toxic to mice after intraperitoneal injection. No palytoxin‐like material was detected either in the hepatopancreas or the muscle and roe of mussels fed O. siamensis. Oysters contained detectable amounts of toxin in hepatopancreas muscle, and roe while higher concentrations were present in the hepatopancreas of scallops. Extracts of control shellfish (tested biotoxin free and not fed O. siamensis) were toxic to mice, and there was no definitive evidence that feeding shellfish with O. siamensis at the levels employed in the present experiment increased the toxicity of shellfish tissue extracts to mice.     

Spectacular low- and mid-latitude electrical fields and neutral winds during a superstorm

In November 2004, a major magnetic storm occurred, a lengthy portion of which was recorded by the Upper Atmospheric Radar Chain. On the 9th and 10th, the Jicamarca Radar detected the highest magnitude penetrating electric fields (±3 mV/m) and vertical drifts (±120 m/s) ever seen at this premiere facility. These large and variable drifts were highly correlated with the interplanetary magnetic and electric fields and created a double F layer on the dayside and unusual TEC behavior throughout the low-latitude zone. These solar wind-induced drifts both suppressed and generated irregularities at the magnetic equator at different times. Large-scale thermospheric disturbances were generated by high-latitude heating and tracked through the middle- to low-latitude zones where both parallel and perpendicular plasma drifts created major ionospheric changes. The auroral oval was located at a magnetic L shell of about three for many hours.     

Aggregation of montmorillonite and organic matter in aqueous media containing artificial seawater

Background  

The dispersion-aggregation behaviors of suspended colloids in rivers and estuaries are affected by the compositions of suspended materials (i.e., clay minerals vs. organic macromolecules) and salinity. Laboratory experiments were conducted to investigate the dispersion and aggregation mechanisms of suspended particles under simulated river and estuarine conditions. The average hydrodynamic diameters of suspended particles (representing degree of aggregation) and zeta potential (representing the electrokinetic properties of suspended colloids and aggregates) were determined for systems containing suspended montmorillonite, humic acid, and/or chitin at the circumneutral pH over a range of salinity (0 – 7.2 psu).     

Interaction of adakitic melt-peridotite: Implications for the high-Mg# signature of Mesozoic adakitic rocks in the eastern North China Craton

Abundant dunite and harzbugite xenoliths are preserved in Early Cretaceous high-Mg# [63–67, where Mg# = molar 100 × Mg/(Mg + Fe_tot)] diorite intrusions from western Shandong in the North China Craton (NCC). Dunite and some harzburgite xenoliths typically preserve areas of orthopyroxenite (sometimes accompanied by phlogopite) either as veins or as zones surrounding chromite grains. Harzburgite is chiefly composed of olivine, orthopyroxene, minor clinopyroxene and chromian-spinel. High Mg#'s (averaging 91.4) and depletions in Al₂O₃ and CaO (averaging 0.52 wt.% and 0.29 wt.%, respectively) in harzburgite and dunite xenoliths suggest that they are residues formed by large degrees of polybaric melting. However, olivines and orthopyroxenes from dunite xenoliths spatially associated with orthopyroxenite display lower Mg#'s (i.e., 82–87 and 83–89, respectively), suggesting that an adakitic melt–peridotite reaction has taken place. This is consistent with the production of veined orthopyroxene or orthopyroxene + phlogopite in dunite and some harzburgite xenoliths in response to the introduction of adakitic melt into the previously depleted lithospheric mantle (i.e., harzburgite and dunite xenoliths). The presence of orthopyroxene in veins or as a zones surrounding chromite in peridotite xenoliths is thought to be representative of adakitic melt metasomatism. The dunite and harzbugite xenoliths are relatively rich in light rare earth elements (LREEs) and large ion lithophile elements (LILEs), poor in heavy rare earth elements (HREEs) and high field strength elements (HFSEs), and lack Eu anomalies on chondrite normalized trace element diagrams. The initial ⁸⁷Sr/⁸⁶Sr ratios and εNd(t) values for the xenoliths range from 0.7058 to 0.7212 and + 0.18 to ? 19.59, respectively. Taken together, these features, combined with the strong depletion in HFSE and the existence of Archean inherited zircons in the host rocks, suggest that the adakitic melt was derived from the partial melting of early Mesozoic delaminated lower continental crust. The interaction of the adakitic melt with peridotite is responsible for the high-Mg# character of the early Cretaceous diorites in western Shandong.     

Partial melting of the Indarch (EH4) meteorite: A textural,chemical, and phase relations view of melting and melt migration

Abstract— To test whether aubrites can be formed by melting of enstatite chondrites and to understand igneous processes at very low O fugacities, we have conducted partial melting experiments on the Indarch (EH4) chondrite at 1000–1500 °C. Silicate melting begins at 1000 °C, and Indarch is completely melted by 1500 °C. The metal-sulfide component melts completely at 1000 °C. Substantial melt migration occurs at 1300–1400 °C, and metal migrates out of the silicate charge at 1450 °C and ～50% silicate partial melting. As a group, our experiments contain three immiscible metallic melts (Si-, P-, and C-rich), two immiscible sulfide melts (Fe- and FeMgMnCa-rich), and silicate melt. Our partial melting experiments on the Indarch (EH4) enstatite chondrite suggest that igneous processes at low fO₂ exhibit several unique features. The complete melting of sulfides at 1000 °C suggests that aubritic sulfides are not relics. Aubritic oldhamite may have crystallized from Ca and S complexed in the silicate melt. Significant metal-sulfide melt migration might occur at relatively low degrees of silicate partial melting. Substantial elemental exchange occurred between different melts (e.g., S between sulfide and silicate, Si between silicate and metal), a feature not observed during experiments at higher fO₂. This exchange may help explain the formation of aubrites from known enstatite chondrites.     

Exploring landscape and geologic controls on spatial patterning of streambank groundwater discharge in a mixed land use watershed

Preferential groundwater discharge features along stream corridors are ecologically important at local and stream network scales, yet we lack quantification of the multiscale controls on the spatial patterning of groundwater discharge. Here we identify physical attributes that best explain variation in the presence and lateral extent of preferential groundwater discharges along two 5th order streams, the Housatonic and Farmington Rivers, and 32 1st to 4th order reaches across the Farmington River network. We mapped locations of preferential groundwater discharge exposed along streambanks using handheld thermal infrared cameras paired with high-resolution topographic and land use land cover datasets, surficial soil characteristic maps, and depth-to-bedrock geophysical measurements. The unconfined Housatonic River, MA, USA (12 km) had fewer discharge locations and less lateral extent (41 discharge locations with 38 m of active discharge/km of river) compared to the partially confined Farmington River, CT, USA (26 km; 169 discharge locations with 129 m of active discharge/km of river). Using a moving window analysis, we found along both rivers that discharge was more likely to occur where bank slopes were steeper, floodplain extent was narrower, and degree of confinement was higher. Along the Farmington River, groundwater discharge was more likely to occur where saturated hydraulic conductivity was higher and depth-to-bedrock was shallower. Among the 32 stream reaches surveyed (33.2 km of total stream length) within the Farmington River watershed, preferential discharge was observed in all but two stream reaches, varied from 0 to 25% of lateral extent along stream banks (mean = 6%), and was more likely to occur where stream reach slopes were steep, saturated hydraulic conductivity was high, and watershed urbanization was low. Our results show that, though both surface (e.g., topographic, land use land cover) and subsurface (e.g., soil characteristics, bedrock depth) factors control the prevalence of streambank preferential groundwater discharge, the dominant controls vary across valley settings and stream sizes.     

Hydrological changes in the climate system from leaf responses to increasing CO2

Vegetation is a major component of the climate system because of its controls on the energy and water balance over land. This functioning changes because of the physiological response of leaves to increased CO₂. A climate model is used to compare these changes with the climate changes from radiative forcing by greenhouse gases. For this purpose, we use the Community Earth System Model coupled to a slab ocean. Ensemble integrations are done for current and doubled CO₂. The consequent reduction of transpiration and net increase of surface radiative heating from reduction in cloudiness increases the temperature over land by a significant fraction of that directly from the radiative warming by CO₂. Large-scale atmospheric circulation adjustments result. In particular, over the tropics, a low-level westerly wind anomaly develops associated with reduced geopotential height over land, enhancing moisture transport and convergence, and precipitation increases over the western Amazon, the Congo basin, South Africa, and Indonesia, while over mid-latitudes, land precipitation decreases from reduced evapotranspiration. On average, land precipitation is enhanced by 0.03 mm day^?1 (about 19 % of the CO₂ radiative forcing induced increase). This increase of land precipitation with decreased ET is an apparent negative feedback, i.e., less ET makes more precipitation. Global precipitation is slightly reduced. Runoff increases associated with both the increased land precipitation and reduced evapotranspiration. Examining the consistency of the variations among ensemble members shows that vegetation feedbacks on precipitation are more robust over the tropics and in mid to high latitudes than over the subtropics where vegetation is sparse and the internal climate variability has a larger influence.     

Wind-tunnel Modelling of Dispersion from a Scalar Area Source in Urban-Like Roughness

A wind-tunnel study was conducted to investigate ventilation of scalars from urban-like geometries at neighbourhood scale by exploring two different geometries a uniform height roughness and a non-uniform height roughness, both with an equal plan and frontal density of λ _p = λ _f = 25%. In both configurations a sub-unit of the idealized urban surface was coated with a thin layer of naphthalene to represent area sources. The naphthalene sublimation method was used to measure directly total area-averaged transport of scalars out of the complex geometries. At the same time, naphthalene vapour concentrations controlled by the turbulent fluxes were detected using a fast Flame Ionisation Detection (FID) technique. This paper describes the novel use of a naphthalene coated surface as an area source in dispersion studies. Particular emphasis was also given to testing whether the concentration measurements were independent of Reynolds number. For low wind speeds, transfer from the naphthalene surface is determined by a combination of forced and natural convection. Compared with a propane point source release, a 25% higher free stream velocity was needed for the naphthalene area source to yield Reynolds-number-independent concentration fields. Ventilation transfer coefficients w _T /U derived from the naphthalene sublimation method showed that, whilst there was enhanced vertical momentum exchange due to obstacle height variability, advection was reduced and dispersion from the source area was not enhanced. Thus, the height variability of a canopy is an important parameter when generalising urban dispersion. Fine resolution concentration measurements in the canopy showed the effect of height variability on dispersion at street scale. Rapid vertical transport in the wake of individual high-rise obstacles was found to generate elevated point-like sources. A Gaussian plume model was used to analyse differences in the downstream plumes. Intensified lateral and vertical plume spread and plume dilution with height was found for the non-uniform height roughness.     

Interpretation of tensor gravity data using an adaptive tilt angle method

Full Tensor Gravity Gradiometry (FTG) data are routinely used in exploration programmes to evaluate and explore geological complexities hosting hydrocarbon and mineral resources. FTG data are typically used to map a host structure and locate target responses of interest using a myriad of imaging techniques. Identified anomalies of interest are then examined using 2D and 3D forward and inverse modelling methods for depth estimation. However, such methods tend to be time consuming and reliant on an independent constraint for clarification. This paper presents a semi‐automatic method to interpret FTG data using an adaptive tilt angle approach. The present method uses only the three vertical tensor components of the FTG data (T_zx, T_zy and T_zz) with a scale value that is related to the nature of the source (point anomaly or linear anomaly). With this adaptation, it is possible to estimate the location and depth of simple buried gravity sources such as point masses, line masses and vertical and horizontal thin sheets, provided that these sources exist in isolation and that the FTG data have been sufficiently filtered to minimize the influence of noise. Computation times are fast, producing plausible results of single solution depth estimates t hat relate directly to anomalies. For thick sheets, the method can resolve the thickness of these layers assuming the depth to the top is known from drilling or other independent geophysical data. We demonstrate the practical utility of the method using examples of FTG data acquired over the Vinton Salt Dome, Louisiana, USA and basalt flows in the Faeroe‐Shetland Basin, UK. A major benefit of the method is the ability to quickly construct depth maps. Such results are used to produce best estimate initial depth to source maps that can act as initial models for any detailed quantitative modelling exercises using 2D/3D forward/inverse modelling techniques.