Anomalous induction across Europe

Summary Using real induction vector data, collected at 958 European observation sites, together with our data from the Bohemian Massif and the West Carpathians, we have generated a contour map of the transfer function TF1 (corresponding to transfer function A in Wiese's relation). Only the zero contour is retained and shown on the map. It clearly marks the main anomalous induction zones, related to internal structural inhomogeneities, across Europe.     

Spatial Distribution of the Biotic Community in the Thermal Gradients of the Two Hot Springs

The runoff channels of two hot springs are investigated at seven and six stations with water temperatures of 64 … 34 or 44 … 35 °C, respectively. The temperatures are constant in the annual variation. With decreasing temperature, the pH-values and alkalinity decrease, whereas the hydrogen carbonate content and the orthophosphate concentration increase. In the range above 60 °C the mat consists of cyanophyceae and bacteria, and, unexpectedly, already from 60 °C also diatoms occur as dominant forms, below 40 °C the mat consisting of green algae and diatoms. With rotatoria, crustaceae and insects, herbivorous species occur only below 40 °C, fish species are regularly found below 38 °C.     

Application of integrated methods in mapping waste disposal areas

An integrated suite of environmental methods was used to characterize the hydrogeological, geological and tectonic regime of the largest waste disposal landfill of Crete Island, the Fodele municipal solid waste site (MSW), to determine the geometry of the landfill (depth and spatial extent of electrically conductive anomalies), to define the anisotropy caused by bedrock fabric fractures and to locate potential zones of electrically conductive contamination. A combination of geophysical methods and chemical analysis was implemented for the characterization and management of the landfill. Five different types of geophysical surveys were performed: (1) 2D electrical resistance tomography (ERT), (2) electromagnetic measurements using very low frequencies (VLF), (3) electromagnetic conductivity (EM31), (4) seismic refraction measurements (SR), and (5) ambient noise measurements (HVSR). The above geophysical methods were used with the aim of studying the subsurface properties of the landfill and to define the exact geometrical characteristics of the site under investigation.     

Aquifer development planning to supply a seaside resort: a case study in Goa,India

Using the hydrogeological and socio-economic data derived from a European Commission research project on the measurement, monitoring and sustainability of the coastal environment, two optimization models have been applied to satisfy the future water resources needs of the coastal zone of Bardez in Goa, India. The number of tourists visiting Goa since the 1970s has risen considerably, and roughly a third of them go to Bardez taluka, prompting growth in the tourist-related infrastructure in the region. The optimization models are non-linear mixed integer models that have been solved using GAMS/DICOPT++ commercial software. Optimization models were used, firstly, to indicate the most suitable zones for building seaside resorts and wells to supply the tourist industry with an adequate amount of water, and secondly, to indicate the best location for wells to adequately supply pre-existing hotels. The models presented will help to define the optimal locations for the wells and the hydraulic infrastructures needed to satisfy demand at minimum cost, taking into account environmental constraints such as the risk of saline intrusion.

---

Résumé A l’aide de données hydrogéologiques et socio-économiques, dérivées d’un projet de recherche de la Commission Européenne sur l’étude, la surveillance et la durabilité de l’environnement c?tier, deux modèles d’optimisation ont été appliqués en vue de satisfaire les besoins futurs en ressources en eau de la zone c?tière de Bardez au Goa en Inde. Le nombre de touristes qui visitent le Goa depuis les années 70 a considérablement augmenté et environ un tiers d’entre eux se rend à Bardez taluka, ce qui encourage la croissance des infrastructures liées au tourisme dans la région. Les modèles d’optimisation sont des modèles non linéaires mixtes en nombres entiers qui ont été résolus en utilisant le logiciel commercial GAMS/DICOPT++. Les modèles d’optimisation ont été utilisés pour indiquer premièrement les zones les plus appropriées pour construire des stations balnéaires et des puits pour approvisionner en quantité d’eau suffisante l’industrie touristique, et deuxièmement pour indiquer la meilleure localisation de puits pour l’alimentation des h?tels préexistants. Les modèles présentés aideront à définir les localisations optimales des puits et des infrastructures hydrauliques nécessaires à la satisfaction de la demande à un co?t minimum, tout en prenant en compte les contraintes environnementales, tel que le risque d’intrusion saline.

---

Resumen Se han aplicado dos modelos de optimización en base a datos socio-económicos e hidrogeológicos derivados de un proyecto de investigación de la Comisión Europea sobre medición, monitoreo y sostenibilidad del ambiente costero para satisfacer las necesidades futuras de recursos hídricos de la zona costera de Bardez en Goa, India. El número de turistas que visita Goa desde la década de 1970′s ha subido considerablemente y cerca de un tercio de ellos van a Bardez taluka impulsando el crecimiento en la infraestructura turística de la región. Los modelos de optimización son modelos de números enteros mixtos no-lineales que se han resuelto usando el programa comercial GAMS/DICOPT++. Los modelos de optimización se usaron, primero para indicar las zonas más adecuadas para la construcción de centros de diversión en las márgenes del océano y pozos para abastecer la industria turística con una adecuada cantidad de agua, y segundo, para indicar la mejor localización de pozos para el abastecimiento de hoteles pre-existentes. Los modelos que se presentan ayudarán a definir las localizaciones óptimas para los pozos y las infraestructuras hidráulicas necesarias para satisfacer la demanda al mínimo costo, tomando en consideración restricciones ambientales tal como el riesgo de intrusión salina.

     

Investigation of waste disposal areas using electrical methods: a case study from Chania,Crete, Greece

A geophysical investigation of a landfill area was conducted as inextricable phase of a preliminary geotechnical, geological and hydrogeological study of the area under investigation. Electrical resistivity tomography (ERT), one of the most promising prospecting techniques mainly concerning its effective contribution to resolve several environmental problems, was applied for the geophysical modeling. ERT is a robust imaging method the theory and implementation of which are well documented in geophysical research literature. The survey site is located in Akrotirion Peninsula, about 7 km east of Chania city in Crete I. The geological setting comprises Trypalion limestones, marly limestones and a clayed weathered layer. Cavities are also identified at various scales which are recent tectono-karstic voids. Due to the above-mentioned geological singularity and in the light of the requirement for an environmentally safe construction of the landfill, an ERT survey was carried out. Specifically, seven geoelectrical tomographies were conducted reaching the prospecting depth of 36 m. The resulted images conduced, to overcome geotechnical problems since the spatial distribution of karstic voids was determined, to plan the future sites for waste disposal as the geological conditions were studied in detail and to reliably estimate the thickness of the already deposited wastes. The resulted images were confirmed using available borehole logs and ambient noise measurements.     

Analysis of Physical and Chemical Parameters for Discrimination of Water Origin in a Hydroelectric Reservoir

Seventeen physical and chemical parameters were obtained from a hydroelectric reservoir located in a tropical region in the south of Brazil. Multivariate Principal Component Analysis (PCA) and Hierarchical Group Analysis (HGA) were used to identify the parameters discriminating the origin of water from the Tibagi and the Primeiro de Maio River, after it has passed the mixing region. The study was conducted during the dry and rainy seasons in July 2002 and February 2003 at three depths and three sampling sites located 0, 5, and 10 km away from the mixing region. The statistical methods showed to be appropriate for identifying the contribution of each tributary in the water mixing site of a complex water system. The most important discriminating parameter was the absorbance relation A(253 nm)/A(203 nm), followed by the concentrations of Fe(III), Mn(III), and Ni(II). An anthropogenic interference was found in the reservoir due to high Ni(II) and orthophosphate concentrations caused by a nearby town sewage discharge. The interference was more important during the dry periods due to the lower dispersion of the pollutants. Urgent initiatives should be taken from the state government to build treatment stations for the wastewater of the small cities around the Capivara hydroelectric reservoir to prevent the drinking water quality from deteriorating.