Granulometric and mineral composition of the loess-paleosol formation in Moldova

The granulometric composition and sorting of loesses and interbedded soils are studied for stratigraphic subdivision and correlation of the loess-paleosol sequence in Moldova. Distinctive features of loess and paleosol horizons of different age are identified and general characteristics of the mineral composition are described that together with other lithological characteristics, including the visual ones, improve reliability of stratigraphic operations.     

A 50-year record of NO<Subscript>x</Subscript> and SO<Subscript>2</Subscript> sources in precipitation in the Northern Rocky Mountains,USA

Ice-core samples from Upper Fremont Glacier (UFG), Wyoming, were used as proxy records for the chemical composition of atmospheric deposition. Results of analysis of the ice-core samples for stable isotopes of nitrogen (δ¹⁵N, ) and sulfur (δ³⁴S, ), as well as and deposition rates from the late-1940s thru the early-1990s, were used to enhance and extend existing National Atmospheric Deposition Program/National Trends Network (NADP/NTN) data in western Wyoming. The most enriched δ³⁴S value in the UFG ice-core samples coincided with snow deposited during the 1980 eruption of Mt. St. Helens, Washington. The remaining δ³⁴S values were similar to the isotopic composition of coal from southern Wyoming. The δ¹⁵N values in ice-core samples representing a similar period of snow deposition were negative, ranging from -5.9 to -3.2 ‰ and all fall within the δ¹⁵N values expected from vehicle emissions. Ice-core nitrate and sulfate deposition data reflect the sharply increasing U.S. emissions data from 1950 to the mid-1970s.     

Two magmatic series with island arc affinities within the vourinos ophiolite

Within the Vourinos ophiolite evidence of two magmatic series has been preserved in cognate cumulates and in effusive and hypabyssal rocks, which constitute the earlier Krapa sequence and the younger Asprokambo sequence. The Asprokambo dyke basic magmas which are poor in incompatible elements and relatively Ni and Cr rich, bear some resemblance to very low Ti basalts (transitional to boninites) found in subduction related arcs or interarc basins. Krapa series magmas from sills, massive and pillow lavas are best equated with low-K tholeiites of island arc suites. Compositions of Al- and Ti- poor Cpx in lavas from both series are comparable to those in island arc basalts, the Asprokambo Cpx being richer in Ca and Cr than those from Krapa.The large volume of cumulates from the Krapa sequence displays the following crystallization order: Ol±Sp, Cpx, Pl±Opx, Mt. Periodic influx of fresh magma batches into the magma chamber occurred mainly during the formation of the lower cumulates (wehrlite, Ol-clinopyroxenite and melagabbro). The upper cumulates, gabbronorite and leucogabbronorite with minor Mt-bearing gabbronorite, crystallized in the upper levels of a magma chamber which became progressively smaller with time. In the Asprokambo sequence, Ol+Sp, Opx, Cpx, PI and Amph are the successively crystallizing phases. The ortho to heteradcumulates consist of websterite, Pl-websterite, gabbronorite, amphibole bearing leuconorite, diorite and granophyre. In cumulates, especially in the lower Krapa sequence, significant subsolidus reaction was probably induced by the persistence of high geothermal gradients linked to continuous magmatism. Petrological features indicate that the evolution of the Krapa series is more compatible with an intermediate fractional/equilibrium crystallization history in an initially open system, whereas nearly perfect fractional crystallization in closed system may have occurred in the small Asprokambo magma chambers. Chemical variations in the lavas of both series can be explained in terms of crystallization of the observed cumulates. Significantly, the Asprokambo intrusives have igneous Mg-hornblende and vanadium bearing, chromian, aluminous titaniferous magnetite, crystallization of which is responsible for the calcalkaline evolutionary trend of these rocks. Major and trace element modelling necessitates a two stage model for the petrogenesis of the Vourinos parental melts, involving high-degree remelting of previously depleted mantle sources favoured by the influx of subduction derived hydrous fluids. The primary magmas parental to the Krapa and Asprokambo series could have been derived respectively by 20 and 30% equilibrium partial fusion of variably depleted lherzolitic sources, leaving residua having a harzburgitic to dunitic composition.     

Modeling the natural degradation of earthworks

Stratigraphic, topographic, and ground‐penetrating radar data obtained from a ca. 1800‐year‐old embankment and adjacent ditch at the Hopewell Mound Group (Chillicothe, Ohio) are used to validate the archaeological application of a simple finite‐differences diffusion model employed frequently to assess geomorphic change in natural landscapes. Although diffusion models have been used to describe the topographic degradation of landforms in a variety of geomorphic terrains, the approach has not been applied to ancient earthworks in an archaeological context. The results of this study indicate that a variety of initial earthwork forms can result in the sinusoidal profile apparent on the current landscape. Using the model results to interpret the field data, we suggest that the initial embankment form was steeper and the adjacent ditch was deeper. As a result of natural degradation processes, the earthwork widened and flattened over time. These results have broad implications for any study aimed at: (1) assessing the function of original earthwork forms, (2) determining the formation processes of complicated stratigraphies or artifact assemblages, (3) estimating the time and labor investment required for construction, or (4) identifying the socio‐political structures necessary to build earthworks. © 2005 Wiley Periodicals, Inc.     

“Extreme boiling” model for variable salinity of the Hokko low-sulfidation epithermal Au prospect, southwestern Hokkaido, Japan

The Hokko prospect is located in the Minamikayabe area southwestern Hokkaido, Japan, where gold-bearing quartz veins of Pliocene age are exposed at the surface. The alteration mineral assemblage is typical of low-sulfidation epithermal systems, with the quartz veins associated with adularia alteration overprinted on Late Miocene propylitic alteration. Fluid inclusion studies of the vein quartz reveal mean homogenization temperatures of approximately 220 °C, and the co-existence of low-salinity (<2 wt.% NaCl equivalent) and moderate salinity (2 to 12 wt.% NaCl equivalent) fluid inclusions within the same veins. The moderate salinity fluid inclusions (2–12 wt.% NaCl equivalent) typically have relatively low homogenization temperatures between 150° to 200 °C. The results obtained from stable isotope analysis of  δ¹⁸O in quartz vein material showed a gradual decrease in  δ¹⁸O signatures with increasing depth. The majority of the samples have calculated fluid source signatures (δ¹⁸O_H2O) between −8.0 and −10.0‰, but there is a significant change in the composition above 185 m drill depth. The shallower samples in particular show a wide range of oxygen isotope signatures that are associated with the moderate salinity fluid inclusions. We interpret that low-salinity inclusions within the Hokko system represent the composition of the liquid phase of the fluid, before boiling, and that the moderate-salinity inclusions are representative of the residual liquid phase, after extensive non-adiabatic boiling and vapor loss in an open system. This mechanism resulted in the entrapment of fluids with variable salinities at the same time, and in close proximity to each other. This is also reflected in the  δ¹⁸O_H2O values which become more variable and heavier where the moderate-salinity inclusions occur. Deposition of ore minerals within the Hokko vein system also occurred at this time as a result of boiling and gas loss. Received: 30 May 1997 / Accepted: 6 January 1998     

A comparative study of the modelling of cement hydration and cement-rock laboratory experiments

The use of cement and concrete as fracture grouting or as tunnel seals in a geological disposal facility for radioactive wastes creates potential issues concerning chemical reactivity. From a long-term safety perspective, it is desirable to be able model these interactions and changes quantitatively. The ‘Long-term Cement Studies’ (LCS) project was formulated with an emphasis on in situ field experiments with more realistic boundary conditions and longer time scales compared with former experiments. As part of the project programme, a modelling inter-comparison has been conducted, involving the modelling of two experiments describing cement hydration on one hand and cement-rock reaction on the other, with teams representing the NDA (UK), Posiva (Finland), and JAEA (Japan).This modelling exercise showed that the dominant reaction pathways in the two experiments are fairly well understood and are consistent between the different modelling teams, although significant differences existed amongst the precise parameterisation (e.g. reactive surface areas, dependences of rate upon pH, types of secondary minerals), and in some instances, processes (e.g. partition of alkali elements between solids and liquid during cement hydration; kinetic models of cement hydration). It was not conclusive if certain processes such as surface complexation (preferred by some modellers, but not by others) played a role in the cement-rock experiment or not. These processes appear to be more relevant at early times in the experiment and the evolution at longer timescales was not affected. The observed permeability profile with time could not be matched. The fact that no secondary minerals could be observed and that the precipitated mass calculated during the simulations is minor might suggest that the permeability reduction does not have a chemical origin, although a small amount of precipitates at pore throats could have a large impact on permeability.The modelling exercises showed that there is an interest in keeping the numerical models as simple as possible and trying to obtain a reasonable fit with a minimum of processes, minerals and parameters. However, up-scaling processes and model parameterisation to the timescales appropriate to repository safety assessment are of considerable concern. Future modelling exercises of this type should focus on a suitable natural or industrial analogue that might aid assessing mineral-fluid reactions at these longer timescales.     

Assessment of cement’s dust impact on the soil using principal component analysis and GIS

To evaluate the impact of the cement’s dust emitted by the eastern Moroccan cement factory (Oujda Holcim) and deposited on the soil of the Ain Lahjar commune, 58 samples of soil were collected around the factory on a radius of 3 km approximately. The physicochemical analyses of the upper 3 cm of the soil surface samples correspond to the pH, electrical conductivity, the chlorides and the oxides of Ca, Al, Fe, K, Mn, S and Si which were analyzed by the fluorescence of X-rays. The preliminary results demonstrate that this dust are especially basic and contain a high free lime (43% CaO). The principal component analysis (applied on the 58 samples of soil) allows deducting that the free lime and the sulfur oxide are the tracer elements of this form of pollution. Furthermore, the spatial projection of the factor scores of the principal component analysis using the geographical information system permits to determine the spatial distribution of more polluted areas of soils as well as to estimate their surface (63.3% of the survey zone).     

Geology, geochemistry, and age of volcanites of the Tunguda Volcanic Formation: The problem of the Archean-Proterozoic boundary in North Karelia

The geological, geochemical, and isotopic-geochronological data obtained for Sumian moderate-basic metavolcanites of Shombozero and Lekhta structures of the Panayarvi-Vygozero belt shows that the Tunguda Formation is confined to the Paleoproterozoic structural and material complex. This formation is represented by the complex of weakly differentiated andesitobasalts and andesites of calc-alkaline series with higher contents of MgO and moderate contents of Al₂O₃ and rare earth elements. The rocks of the Tunguda Formation are different from the Late Archean basic rocks of the Hiziyarvi Formation represented mainly by tholeiitic basalts with low REE contents and undifferentiated spectrum of REE distribution. The age of volcanites of the Tunguda Formation was determined to be 2439 ± 21 Ma. The xenogenic zircons from metaandesites of the Tunguda Formation have Neoarchean age according to the ²⁰⁷Pb/²⁰⁶Pb ratio (from 2536 ± 4 to 2825 ± 7 Ma). The Neoarchean zircons, a negative value of ?_Nd (?3.8), and indicative geochemical parameters are evidence that the crustal component took part in formation of the protolith of the studied rocks.