Vegetation Cover and Elevation in Long-Term Experimental Nutrient-Enrichment Plots in Great Sippewissett Salt Marsh,Cape Cod,Massachusetts: Implications for Eutrophication and Sea Level rise

Nitrogen inputs restructure ecosystems and can interact with other agents of ecological change and potentially intensify them. To examine the effects of nitrogen combined with those of elevation and competition, in 2005 we mapped vegetation and elevation within experimental plots that have been fertilized since 1970 in Great Sippewissett salt marsh, Cape Cod, MA, USA and compared the resulting effects on marsh vegetation. Decadal-scale chronic nutrient enrichment forced changes in cover and spatial distribution of different species. With increasing enrichment, there was a shift in species cover primarily involving loss of Spartina alterniflora and an increase in Distichlis spicata. Percent cover of near monocultures increased with nitrogen fertilization, owing mainly to the proliferation of D. spicata. The experimental fertilization prompted a shift from the short form of S. alterniflora to taller forms, hence increasing above-ground biomass, where this species managed to remain. Chronic enrichment increased upper and lower limits of the elevation range within which certain species occurred. The shift to increased cover of D. spicata was also associated with faster accretion of the marsh surface where this species was dominant, but not where S. alterniflora was dominant. Interactions among nutrient supply, elevation, and competition altered the direction of competitive success among different species of marsh plants, and forced changes in the spatial distribution and composition of the salt marsh plant communities. The results imply that there will be parallel changes in New England salt marshes owing to the widespread eutrophication of coastal waters and the increasing sea level rise. Knowing the mechanisms structuring marsh vegetative cover, and their role in modification of salt marsh accretion, may provide background with which to manage maintenance of affected coastal wetlands.     

The densest meteorite collection area in hot deserts: The San Juan meteorite field (Atacama Desert,Chile)

Abstract– We describe the geological, morphological, and climatic setting of the San Juan meteorite collection area in the Central Depression of the Atacama Desert (Chile). Our recovery activities yielded 48 meteorites corresponding to a minimum of 36 different falls within a 3.88 km² area. The recovery density is in the range 9–12 falls km^?2 depending on pairing, making it the densest among meteorite collection areas in hot deserts. This high meteorite concentration is linked to the long‐standing hyperaridity of the area, the stability of the surface pebbles (> Ma), and very low erosion rates of surface pebbles (approximately 30 cm Ma^?1 maximum). The San Juan meteorite population is characterized by old terrestrial ages that range from zero to beyond 40 ka, and limited weathering compared with other dense collection areas in hot desert. Chemical weathering in San Juan is slow and mainly controlled by the initial porosity of meteorites. As in the Antarctic and other hot deserts, there is an overabundance of H chondrites and a shortage of LL chondrites compared with the modern falls population, suggesting a recent (< few ka) change in the composition of the meteorite flux to Earth.     

http://www.sciencedirect.com/science/article/pii/S1674987113000327

The Panzhihua intrusion in southwest China is part of the Emeishan large igneous province and host of a large Fe-Ti-V ore deposit.In previous interpretations it was considered to be a layered,differentiated sill with the ore deposits at its base.New structural and petrological data suggest instead that the intrusion has an open S-shape,with two near-concordant segments joined by a discordant dyke-like segment. During emplacement of the main intrusion,multiple generations of mafic dykes invaded carbonate wall rocks,producing a large contact aureole.In the central segment,magmatic layering is oriented oblique to the walls of the intrusion.This layering cannot have formed by crystal settling or in-situ growth on the floor of the intrusion;instead we propose that it resulted from inward solidification of multiple,individually operating,convection cells.Ore formation was triggered by interaction of magma with carbonate wall rocks.     

Stratigraphy and depositional environments of the Mamfe Formation and its implication on the tectonosedimentary evolution of the Ikom-Mamfe Embayment, West Africa

A 42 m thick outcropping portion of the Mamfe Formation is subdivided into Manyu (31 m thick) and Kesham (11m thick) Members on the basis of textural, mineralogical and structural differences. The Manyu Member (Albian) consists of folded and indurated, medium to coarse grained arkosic sandstones and thickly laminated organic-rich shales deposited in a lacustrine environment. The Kesham Member (Cenomanian) consists of subarkoses intercalated with massive green shale and mudstone deposited in a fluvial environment. The change in depositional environment was tectonically controlled. The mid Cretaceous paleogeography of the embayment was governed by the NE-SW trending “Ikom ridge” which prevented marine incursion from adjacent the Benue Sea. Evaporites found within the basin were precipitated from ocean water that was periodically spilled by strong tides and storms across the ridge into the embayment. The filling-up of the embayment to base level in the Cenomanian resulted in a shift in the depositional center downstream to adjoining lower Benue Trough. Similarity in heavy mineral composition and maturity of the Cenomanian sandstones with recent clastics in the embayment indicates their derivation from the same source terrain and relatively stable tectonic and climatic conditions at the source area since the Cenomanian time.     

Understanding Effectiveness in its Broader Context: Assessing Case Study Methodologies for Evaluating Collaborative Conservation Governance

Abstract

Collaborative forms of governance are increasingly favored in conservation and potentially offer a range of practical and outcome-based benefits. However, tools for critically assessing whether and how collaboration enhances the attainment of conservation objectives are lagging behind the enthusiasm. We use a framework that considers effectiveness in relation to capacity of key actors and institutions to achieve outcomes and respond to emergent problems, robustness over time (i.e. adapting to changes while still achieving objectives), context-specific drivers of change, and the structure of networks and institutions to assess common approaches for evaluating effectiveness. Network analysis performs well in terms of structure, while action research and the diagnostic method offer deep insights into capacity and context. Scenario planning performs well in understanding robustness and context but performs better when combined with a diagnostic. The evaluation reveals important insights for approaching and standardizing investigations of collaborative governance regimes and their effectiveness.     

Role of dynamic vegetation in regional climate predictions over western Africa

This study examines the role of vegetation dynamics in regional predictions of future climate change in western Africa using a dynamic vegetation model asynchronously coupled to a regional climate model. Two experiments, one for present day and one for future, are conducted with the linked regional climate-vegetation model, and the third with the regional climate model standing alone that predicts future climate based on present-day vegetation. These simulations are so designed in order to tease out the impact of structural vegetation feedback on simulated climate and hydrological processes. According to future predictions by the regional climate-vegetation model, increase in LAI is widespread, with significant shift in vegetation type. Over the Guinean Coast in 2084–2093, evergreen tree coverage decreases by 49% compared to 1984–1993, while drought deciduous tree coverage increases by 56%. Over the Sahel region in the same period, grass cover increases by 31%. Such vegetation changes are accompanied by a decrease of JJA rainfall by 2% over the Guinean Coast and an increase by 23% over the Sahel. This rather small decrease or large increase of precipitation is largely attributable to the role of vegetation feedback. Without the feedback effect from vegetation, the regional climate model would have predicted a 5% decrease of JJA rainfall in both the Guinean Coast and the Sahel as a result of the radiative and physiological effects of higher atmospheric CO₂ concentration. These results demonstrate that climate- and CO₂-induced changes in vegetation structure modify hydrological processes and climate at magnitudes comparable to or even higher than the radiative and physiological effects, thus evincing the importance of including vegetation feedback in future climate predictions.     

Spectrum of climate change and streamflow alteration at a watershed scale

Worldwide, evidences of water cycle alteration and fresh water resources depletion are frequently reported with various magnitudes. This alteration in the hydrologic cycle is often regarded as a signal of the actual climate change. However, the debate on climate change seems to have preferentially focused on global-scale patterns such that the rich knowledge gathered in the domain is virtually less integrated to decision making at the watershed level. Indeed, the watershed apprehension of climate change is probably an imperative for sustainable water resources planning. The scope of the present study aligns with that imperative as it aims at conciliating patterns of climate change with observations of hydrologic alterations at the watershed level. Specifically, the paper describes the interplay between land-cover changes and the terrestrial water cycle disturbances under climate change at the global level. Thereafter, it reports a watershed-level analysis of streamflow, land-cover, PET and precipitation alteration. Specially, the case study focused on the Brazos River basin, located in the USA and shared by the states of Texas and New Mexico. From both regional and watershed prospects, signals of hydrologic alteration during the time period 1955–2014 are highlighted and then implications of climate change are discussed. The results show an overall longitudinal gradient of precipitation changes and a latitudinal gradient of PET changes across the Brazos watershed. However, these gradients of changes seem to be driven by regional climate components which extend beyond the physical boundary of the Brazos watershed. Mann–Kendall’s analysis of discharge time series (annual average, minimum and maximum) at 10 different stations exhibits meaningful contrasts from upstream to downstream. An assessment of land-cover changes shows critical patterns of landscape change across the watershed. The analyses depicted signals of urbanization sprawl and land-cover degradation. Specially, the significant statistical relationships observed between the time series of maximum green vegetation fraction (MGVF) and streamflow also indicate that the origin of the observed hydrologic alteration is anthropogenic. Ultimately, the results are discussed within the scope of climate change.     

Laboratory and numerical investigation of flow and transport near a seepage-face boundary

Laboratory and numerical modeling investigations were completed to study the unconfined ground water flow and transport processes near a seepage-face boundary. The laboratory observations were made in a radial sand tank and included measurements of the height of the seepage face, flow velocity near the seepage face, travel time distribution of multiple tracer slugs, and streamlines. All the observations were reliably reproduced with a three-dimensional, axi-symmetric, variably saturated ground water flow model. Physical data presented in this work demonstrate and quantify the importance of three-dimensional transport patterns within a seepage-face zone. The results imply that vertically averaged flow models that employ Dupuit approximations might introduce error in the analysis of localized solute transport near a seepage-face boundary. The experimental dataset reported in this work will also be of interest for those who are attempting to validate a numerical algorithm for solving ground water and contaminant discharge patterns near a surface-water boundary.     

Evolution of Hawaiian basalts: a hotspot melting model

Melt generation and extraction along the Hawaiian volcanic chain should be largely controlled by the thermal structure of the Hawaiian swell and the heat source underneath it. We simulate numerically the time- and space-dependent evolution of Hawaiian volcanism in the framework of thermal evolution of the Hawaiian swell, constrained by residual topography, geoid anomalies, and anomalous heat flow along the Hawaiian volcanic chain. The transient heat transfer problem with melting relationships and variable boundary conditions is solved in cylindrical coordinates using a finite difference method. The model requires the lithosphere to be thinned mechanically by mantle plume flow. Melting starts quickly near the base of the plate when the hotspot is encountered. Thermal perturbation and partial melting are largely concentrated in the region where the original lithosphere is thinned and replaced by the mantle flow. The pre-shield Loihi alkalic and tholeiitic basalts are from similar sources, which are a mixture of at least three mantle components: the mantle plume, asthenosphere, and the lower lithosphere. The degree of partial melting averages 10–20%, with a peak value of 30% near the plume center. As a result of continuous compaction, melts are extracted from an active partial melting zone of about 10–20 km thickness, which moves upwards and laterally as the heating and compaction proceed. The rate of melt extraction from the swell increases rapidly to a maximum value of 1 × 10⁵ km³/m.y. over the center of the heat source, corresponding to eruption of large amounts of tholeiitic lavas during the shield-building stage. This volume rate is adequate to account for the observed thickness of the Hawaiian volcanic ridge. Melts from direct partial melting of the mantle plume at depth may be important or even dominant at this stage, although the amount is uncertain. At the waning stage, mixing of melts from the mantle flow pattern with those from low-degree partial melting of the lithosphere may produce postshield alkalic basalts. After the plate moves off the heat source, continuous conductive heating can cause very low degree partial melting (less than 1%) of the lithosphere at shallow depths for about one million years. This process may be responsible for producing post-erosional alkalic basalts. The extraction time for removing such small amount of melts is about 0.4–2 m.y., similar to the time gap between the eruption of post-erosional alkalic lavas and the shield-building stage. Our results show that multi-stage Hawaiian volcanism and the general geochemical characteristics of Hawaiian basalts can be explained by a model of plume-plate interaction.     

Beitrag zur feinstmahlung von industriemineralen

Industrial minerals of a high degree of fineness such as kaolinite, calcite and barite are used to an increasing extent in the chemical industries as filling material in the manu-facturing of paper, paints and plastics or as ingredients of ceramic products. Grains smaller than 5 μm can be produced by dry grinding in a jet mill or by wet grinding in drum mills. To avoid impurities due to wear, these mills are lined with rubber or plastic and ceramic balls are used as grinding bodies.Our investigations in a jet mill show that the fineness of the ground product depends on the feed rate and on the air volume. The grain sizes received in the drum mill are influenced by feed rate, pulp density, speed of rotation and by the grinding bodies (density, size).REM-photographs of mill discharge in the grain-size ranges 10-5 μm and below 5 μm indicate that in both the grains mainly show crystal planes as boundaries. After dry grinding the grains show smooth and clean faces; thus is traced back to the impact effect of the air streams. In wet grinding the fine grains are very prone to form agglomerates.