Horizontal spatial and temporal distribution patterns of nearshore larval fish assemblages at a temperate rocky shore

There have been no previous studies of the composition of nearshore larval fish assemblages along the coast of Portugal. We aimed to describe the composition and horizontal distribution patterns of larval fish assemblages and their temporal dynamics near a rocky reef at depths shallower than 13 m (inshore) and at two miles (3.70 km) from shore (offshore), as well as along transects perpendicular to the shoreline, from the reef to 10 miles offshore (18.52 km). Samples were taken using 5 min sub-surface trawls at the rocky shore of the Arrábida Marine Park (W Portugal). A total of 1021 larvae were collected, belonging to 61 taxa inshore and to 29 taxa offshore. Along transects, 626 larvae of 52 taxa were collected. Most larvae belonged to coastal species associated with rocky reefs. Total larval abundance and diversity were higher from May to July, which is consistent with the spawning activity of adults. Diversity and total larval abundance decreased significantly with increasing distance from shore, both in the inshore/offshore comparison and in the transects, where this decrease was evident at a very small spatial scale (within the first mile from the reef). Species assemblages differed in the pattern of distribution, with most species clearly associated to the extreme nearshore. The distribution patterns obtained were independent of the spawning mode of species. Results are discussed in the light of the possible physical mechanisms that can potentially act at the Arrábida Marine Park to facilitate larvae retention and the role of larval behaviour.     

On the relevance of iron adsorption to container materials in small-volume experiments on iron marine chemistry: Fe-aided assessment of capacity, affinity and kinetics

Iron chemistry in seawater has been extensively studied in the laboratory, mostly in small-volume sample bottles. However, little has been reported about iron wall sorption in these bottles. In this paper, radio-iron ⁵⁵Fe was used to assess iron wall adsorption, both in terms of capacity, affinity and kinetics. Various bottle materials were tested. Iron sorption increased from polyethylene/polycarbonate to polymethylmetacrylate (PMMA)/high-density polyethylene/polytetrafluoroethylene to glass/quartz, reaching equilibrium in a 25–70 h period. PMMA was studied in more detail: ferric iron (Fe(III)) adsorbed on the walls of the bottles, whereas ferrous iron (Fe(II)) did not. Considering that in seawater the inorganic iron pool mostly consists of ferric iron, the wall will be a factor that needs to be considered in bottle experiments.The present data indicate that for PMMA with specific surface (S)-to-volume (V) ratio S/V, both iron capacity (42 ± 16 × 10^− 9 mol/m² or 1.7 × 10^− 9 mol/L recalculated for the S/V-specific PMMA bottles used) and affinity (log K_Fe'W = 11.0 ± 0.3 m²/mol or 12.4 ± 0.3 L/mol, recalculated for the S/V-specific PMMA bottles used) are of similar magnitude as the iron capacity and -affinity of the natural ligands in the presently used seawater and thus cannot be ignored.Calculation of rate constants for association and dissociation of both Fe'L (iron bound to natural occurring organic ligands) and Fe'W (iron adsorbed on the wall of vessels) suggests that the two iron complexes are also of rather similar kinetics, with rate constants for dissociation in the order of 10 ⁻⁴–10^− 5 L/s and rate constants for association in the order of 10⁸ L/(mol s). This makes that iron wall sorption should be seriously considered in small-volume experiments, both in assessments of shorter-term dynamics and in end-point observations in equilibrium conditions. Therefore, the present data strongly advocate making use of iron mass balances throughout in experiments in smaller volume set-ups on marine iron (bio) chemistry.     

On the recent warming of the southeastern Bering Sea shelf

During the last decade, the southeastern Bering Sea shelf has undergone a warming of 3 °C that is closely associated with a marked decrease of sea ice over the area. This shift in the physical environment of the shelf can be attributed to a combination of mechanisms, including the presence over the eastern Bering Sea shelf of a relatively mild air mass during the winter, especially from 2000 to 2005; a shorter ice season caused by a later fall transition and/or an earlier spring transition; increased flow through Unimak Pass during winter, which introduces warm Gulf of Alaska water onto the southeastern shelf; and the feedback mechanism whereby warmer ocean temperatures during the summer delay the southward advection of sea ice during winter. While the relative importance of these four mechanisms is difficult to quantify, it is evident that for sea ice to form, cold arctic winds must cool the water column. Sea ice is then formed in the polynyas during periods of cold north winds, and this ice is advected southward over the eastern shelf. The other three mechanisms can modify ice formation and melt, and hence its extent. In combination, these four mechanisms have served to temporally and spatially limit ice during the 5-year period (2001–2005). Warming of the eastern Bering Sea shelf could have profound influences on the ecosystem of the Bering Sea—from modification of the timing of the spring phytoplankton bloom to the northward advance of subarctic species and the northward retreat of arctic species.     

Algorithm for non-hydrostatic dynamics in the Regional Oceanic Modeling System

A non-hydrostatic algorithm for the Regional Oceanic Modeling System (ROMS) is proposed. It is based on a decomposition technique for hydrostatic and non-hydrostatic pressure. The algorithm has a pressure-correction scheme with split-explicit time-stepping for baroclinic and barotropic vertical modes with a free surface. The algorithm implementation requires solving a Poisson equation for a non-hydrostatic pressure that has a non-symmetric matrix in discrete form. The efficiency of a different class of solvers and preconditioners were tested. The algorithm is successfully implemented with several examples where non-hydrostatic effects are important. These include standing external gravity waves; strongly nonlinear internal wave generation and transformation; stratified shear instability and its associated mixing; and nonlinear internal tidal generation over a ridge. The corresponding changes in the pre-processing and post-processing infrastructure in the existing hydrostatic ROMS code were performed to implement parallel elliptic solvers and a new set of dynamical equations.     

Population dynamics of Callichirus major (Say, 1818) (Crustacea, Thalassinidea) on a beach in northeastern Brazil

We describe the structure, reproductive cycle, fecundity, growth, and mortality of a harvested population of the ghost shrimp Callichirus major. Samples were collected at monthly intervals from September 1999 to October 2000 on an urban sandy beach (08°11′S 34°55′W) in northeastern Brazil. During this period the sex ratio did not differ significantly from 1:1 (0.98 M: 1 F). Minimum and maximum sizes of the Dorsal Oval were 2.59 and 12.19 mm for males and 4.46 and 12.62 mm for females, respectively. Ovigerous females were found throughout the period, except between August and September 2000. Maximum lifespan was estimated as 3.3 and 3.4 years for females and males, respectively. This northeastern population differed from others previously studied in southern and southeastern Brazil, in regard to sex ratio, maximum attained size, maturation size, period and duration of the reproductive cycle, and fecundity. We interpret these regional differences as evidence for over-fishing at the study site, and suggest that large-scale management plans for callianassid populations should use regional population parameters.     

Bathymetric segregation of sea urchins on reefs of the Canarian Archipelago: Role of flow-induced forces

We examined whether adults of three species of sea urchins species (Diadema antillarum, Arbacia lixula, and Paracentrotus lividus) exhibit a consistent depth-dependent partitioning pattern on rocky reefs of the Canarian Archipelago (eastern Atlantic). Hydrodynamic experiments were carried out to quantify the resistance to flow-induced dislodgement in these three species. We tested the model that different morphology can result in habitat partitioning among these sea urchins. Abundances of D. antillarum increased with depth. In contrast, A. lixula and P. lividus showed the opposite zonation pattern, coexisting in high abundances in the shallowest depths (<5 m), and occurring in low densities in the deepest part of reefs (>7 m). Both A. lixula and P. lividus had greater adhesion-surface to body-height ratios than D. antillarum. Similarly, A. lixula and P. lividus showed a greater ability to resist flow-induced dislodgement compared with D. antillarum. The mean “velocity of dislodgement” was 300% and 50% greater for A. lixula and P. lividus, respectively, relative to D. antillarum, for any particular size. As a result, A. lixula and P. lividus are better fitted to life in high-flow environments than D. antillarum. We conclude that the risk of dislodgement by water motion likely play a relevant role in the vertical distribution patterns of these sea urchins in the eastern Atlantic.     

The Monagas Fold-Thrust Belt of Eastern Venezuela. Part I: Structural and thermal modeling

The Eastern Venezuelan Basin (EVB) contains one of the largest hydrocarbon accumulations in the world. Main petroleum targets are buried structures of the Monagas Fold-Thrust Belt (MFTB) which forms the northeastern edge of the EVB. The objective of this study is to integrate the seismic and well data that has been acquired over the last 10 years across the MFTB and EVB, to create an updated structural model. Three regional cross sections 60-75 km long are presented across an area of 4000 km².Five structural domains are described: Amarilis, Furrial, Jusepín, Cotoperí and Pirital. They are characterized by thrusts and high-angle reverse faults. Structural style changes along strike are related to variations in depth of detachment levels and to the strike-slip component of the deformation. We have estimated a shortening between 43 and 59 km that increases eastward over a distance of 40 km.The evolution of the MFTB is divided in four episodes based on stratigraphic, structural and thermal maturity evidences: (1) Oligocene-early Miocene initial movement of Pirital thrust. (2) Early Miocene simultaneous movement on Pirital, Furrial and Cotoperí thrusts. (3) Middle Miocene increases in velocity and change in geometry of Pirital thrust, during an out of sequence period of thrusting. (4) Late Miocene to Holocene minor thrust activity. This evolution is consistent with the oblique convergence between the Caribbean and South American plates and the convergence between North and South America that affected Eastern Venezuela during the Cenozoic.By analyzing the along-strike variations in structural style, new exploratory opportunities have been identified. Under the Orocual and Santa Bárbara fields two untested duplex structures are proposed; they were developed during the middle Miocene. Other prospective hydrocarbon traps are associated to oblique transpressive faults that create anticline structures.     

The Monagas Fold-Thrust belt of Eastern Venezuela. Part II: Structural and palaeo-geographic controls on the turbidite reservoir potential of the middle Miocene foreland sequence

This paper presents a new structural-stratigraphic approach to constrain the reservoir potential of the middle Miocene turbidite systems within the Monagas Fold-Thrust Belt (MFTB) and Maturín Sub-Basin (MSB) of eastern Venezuela. In the frontal anticline structures of the MFTB (Amarilis Area) light hydrocarbons have been produced from these turbidite systems which were deposited in a foreland basin with a complex tectonostratigraphic evolution.In order to predict the location of other analogous reservoirs we used the structural model presented in Part I (Parra et al., 2010) to developed a palaeo-topographic reconstruction at early-middle Miocene. We have then used this reconstruction to constrain the palaeogeography of the middle Miocene foredeep where the turbidites were deposited. The area considered has 5000 km².By middle Miocene four regions are identified: 1) The southern basin margin dipped 1.5-2.5° north; 2) The foredeep axis had a southwest-northeast orientation. Within the foredeep the proto-structures of the MFTB created submerged highs that control the distribution of sediments; 3) The northern basin margin dipped 3-4° south; the coastline was controlled by the Pirital thrust sheet; 4) The main source of sediments was located towards the northwest on the Pirital thrust sheet and Serranía del Interior.Variations in shortening across the strike of the Pirital thrust were accommodated by a lateral ramp which controlled the location of a valley that acted as the main sediment pathway for the sediments that fed the turbidite system. This relationship between the thrust belt geomorphology and the location of turbidite sediment within the foredeep must be considered in order to assess the distribution of the Miocene turbidite reservoirs.     

Evolution of deep-water stratigraphic architecture, Magallanes Basin, Chile

The ˜4000 m thick and ∼20 Myr deep-water sedimentary fill of the Upper Cretaceous Magallanes Basin was deposited in three major phases, each with contrasting stratigraphic architecture: (1) the oldest deep-water formation (Punta Barrosa Formation) comprises tabular to slightly lenticular packages of interbedded sandy turbidites, slurry-flow deposits, and siltstone that are interpreted to record lobe deposition in an unconfined to weakly ponded setting; (2) the overlying, 2500 m thick and shale-dominated Cerro Toro Formation includes a succession of stacked conglomeratic and sandstone channel-fill deposits with associated finer-grained overbank deposits interpreted to record deposition in a foredeep-axial channel-levee system; (3) the final phase of deep-water sedimentation is characterized by sandstone-rich successions of highly variable thickness and cross-sectional geometry and mudstone-rich mass transport deposits (MTDs) that are interpreted to record deposition at the base-of-slope and lower slope segments of a prograding delta-fed slope system. The deep-water formations are capped by shallow-marine and deltaic deposits of the Dorotea Formation.These architectural changes are associated with the combined influences of tectonically driven changes and intrinsic evolution, including: (1) the variability of amount and type of source material, (2) variations in basin shape through time, and (3) evolution of the fill as a function of prograding systems filling the deep-water accommodation. While the expression of these controls in the stratigraphic architecture of other deep-water successions might differ in detail, the controls themselves are common to all deep-water basins. Information about source material and basin shape is contained within the detrital record and, when integrated and analyzed within the context of stratigraphic patterns, attains a more robust linkage of processes to products than stratigraphic characterization alone.     

Depositional architecture and sequence stratigraphy of the Karoo basin floor to shelf edge succession, Laingsburg depocentre, South Africa

The Laingsburg depocentre of the SW Karoo Basin, South Africa preserves a well-exposed 1200 m thick succession of upper Permian strata that record the early filling of a basin during an icehouse climate. Uniformly fine-grained sandstones were derived from far-field granitic sources, possibly in Patagonia, although the coeval staging and delivery systems are not preserved. Early condensed shallow marine deposits are overlain by distal basin plain siltstone-prone turbidites and volcanic ashes. An order of magnitude increase in siliciclastic input to the basin plain is represented by up to 270 m of siltstone with thin sandstone turbidites (Vischkuil Formation). The upper Vischkuil Formation comprises three depositional sequences, each bounded by a regionally developed zone of soft sediment deformation and associated 20-45 m thick debrite that represent the initiation of a major sand delivery system. The overlying 300 m thick sandy basin-floor fan system (Unit A) is divisible into three composite sequences arranged in a progradational-aggradational-retrogradational stacking pattern, followed by up to 40 m of basin-wide hemipelagic claystone. This claystone contains Interfan A/B, a distributive lobe system that lies 10 m beneath Unit B, a sandstone-dominated succession that averages 150 m thickness and is interpreted to represent a toe of slope channelized lobe system. Unit B and the A/B interfan together comprise 4 depositional sequences in a composite sequence with an overall basinward-stepping stacking pattern, overlain by 30 m of hemipelagic claystone. The overlying 400 m thick submarine slope succession (Fort Brown Formation) is characterized by 10-120 m thick sand-prone to heterolithic packages separated by 30-70 m thick claystone units. On the largest scale the slope stratigraphy is defined by two major cycles interpreted as composite sequence sets. The lower cycle comprises lithostratigraphic Units B/C, C and D while the upper cycle includes lithostratigraphic Units D/E, E and F. In each case a sandy basal composite sequence is represented by an intraslope lobe (Units B/C and D/E respectively). The second composite sequence in each cycle (Units C and E respectively) is characterized by slope channel-levee systems with distributive lobes 20-30 km down dip. The uppermost composite sequence in each cycle (Units D and F respectively) are characterised by deeply entrenched slope valley systems. Most composite sequences comprise three sequences separated by thin (<5 m thick) claystones. Architectural style is similar at individual sequence scale for comparable positions within each composite sequence set and each composite sequence. The main control on stratigraphic development is interpreted as late icehouse glacio-eustasy but along-strike changes associated with changing shelf edge delivery systems and variable bathymetry due to differential substrate compaction complicate the resultant stratigraphy.