Cross sections from 5 to 35 MeV for the reactions natMg(3He,x)26Al, 27Al(3He,x)26Al,natCa(3He,x)41Ca,and natCa(3He,x)36Cl: Implications for early irradiation in the solar system

Abstract– Cross sections were measured for the nuclear reactions ^natMg(³He,x)²⁶Al, ²⁷Al(³He,x)²⁶Al, ^natCa(³He,x)⁴¹Ca, and ^natCa(³He,x)³⁶Cl in the energy region from approximately 5–35 MeV. The rates of these reactions are important for studies of early solar system irradiation scenarios. The ²⁶Al, ³⁶Cl, and ⁴¹Ca were separated chemically, and the numbers of atoms produced in each reaction channel were measured using accelerator mass spectrometry (AMS). From these results, 26 cross sections were determined and compared with predictions of the TALYS code. Agreement is within 40% for most cross sections. Our measurements were used to model the production of ⁷Be, ¹⁰Be, ²⁶Al, and ⁴¹Ca in the early solar system. For projectiles ¹H, ³He, and ⁴He, we assumed energy spectra of the general form E^?α. For a wide range of parameterizations, the modeled ratios of ⁷Be/Be and ¹⁰Be/Be on the one hand and of ²⁶Al/²⁷Al and ⁴¹Ca/Ca on the other are coupled because the excitation functions for the relevant nuclear reactions have similar shapes. Modeling of a closed system with the constraint that ¹⁰Be/⁹Be = 0.001 fails to reproduce simultaneously the range of ⁷Be/⁹Be, ²⁶Al/²⁷Al, and ⁴¹Ca/Ca ratios inferred for the early solar system from studies of meteorites.     

Silicon in iron meteorite metal

Abstract– We report Si concentrations in the metal phases of iron meteorites. Analyses were performed by secondary ion mass spectrometry using a CAMECA 1270 ion probe. The Si concentrations are low (0.09–0.46 μg g^?1), with no apparent difference in concentration between magmatic and nonmagmatic iron meteorites. Coexisting kamacite and Ni‐rich metal phases have similar Si contents. Thermodynamic calculations show that Fe,Ni‐metal in equilibrium with silicate melts at temperatures where metal crystallizes should contain approximately 100 times more Si than found in iron meteorites in this work. The missing Si may either occur as tiny silicate inclusions in metal or it may have diffused as Si‐metal into surrounding silicates at low temperatures. In both cases, extensive low‐temperature diffusion of Si in metal is required. It is therefore concluded that low Si in iron meteorites is a result of subsolidus reactions during slow cooling.     

Natural analogues: a potential approach for developing reliable monitoring methods to understand subsurface CO2 migration processes

One possible way of mitigating carbon dioxide (CO₂) emissions from fossil fuel combustion is using carbon dioxide capture and storage (CCS) technology. However, public perception concerning CO₂ storage in the geosphere is generally negative, being particularly motivated by perceived leakage risks. Therefore, a main issue when attempting to gain public acceptance is ensuring provision of appropriate monitoring practices, aimed at providing health, safety and environmental risk assessment, so that potential risks from CO₂ storage are minimized. Naturally occurring CO₂ deposits provide unique natural analogues for evaluating and validating methods used for the detection and monitoring of CO₂ spreading and degassing into the atmosphere. Geological and hydrological structures of the Cheb Basin (NW Bohemia, Czech Republic) represent such a natural analogue for investigating CO₂ leakage and offer a perfect location at which to verify monitoring tools used for direct investigation of processes along preferential migration paths. This shallow basin dating from the Tertiary age is characterized by up to 300?m thick Neogene sediment deposits and several tectonically active faults. The objectives of this paper are to introduce the CO₂ analogues concept to present the Eger Rift as a suitable location for a natural CO₂ analogue site and to demonstrate to what extent such an analogue site should be used (with a case study). The case study presents the results obtained from a joint application of geoelectrical measurements in combination with soil CO₂ concentration and flux determination methods, for the detection and characterization of natural CO₂ releases at gas seeps (as part of a hierarchic monitoring concept). To highlight discharge-controlling structural near surface features was the initial motivation for the application of geoelectrical measurements. Soil-gas concentration and flux measurement techniques are relatively simple to employ and are valuable methods that can be used to monitor seeping CO₂ along preferential pathways. Joint interpretation of both approaches yields a first insight into fluid paths and reveals that the thickness and permeability of site-specific near surface sedimentary deposits have a great influence upon the spatial distribution of the CO₂ degassing pattern at surface level.     

中资企业研发国际化研究——基于华为WIPO专利分析

近年来,中资企业的研发国际化倾向日益明显,海外专利申请数量激增。中资跨国公司的海外R&D中心区位与空间组织结构,以及对企业创新能力提升的影响成为国内外经济地理学研究的热点问题之一。以深圳华为技术有限公司为案例,基于世界知识产权组织专利数据与企业访谈资料,分析了华为研发国际化的途径和成效。研究发现：华为通过在全球卓越中心建立海外R&D中心以及与国际一流企业、大学与科研机构的跨境合作获得领先的研发资源,并通过总部协调实现知识由海外卓越中心向中国的流动。这种主动技术获取途径既保障华为获得全球领先的技术资源,又保障了知识商业化的成果归华为所有,是华为成长为全球领先企业的主要途径。     

Inversion of Scholte wave dispersion and waveform modeling for shallow structure of the Ninetyeast Ridge

The construction of S-wave velocity models of marine sediments down to hundreds of meters below the seafloor is important in a number of disciplines. One of the most significant trends in marine geophysics is to use interface waves to estimate shallow shear velocities which play an important role in determining the shallow crustal structure. In marine settings, the waves trapped near the fluid–solid interface are called Scholte waves, and this is the subject of the study. In 1998, there were experiments on the Ninetyeast Ridge (Central Indian Ocean) to study the shallow seismic structure at the drilled site. The data were acquired by both ocean bottom seismometer and ocean bottom hydrophone. A new type of seafloor implosion sources has been used in this experiment, which successfully excited fast and high frequency (>500 Hz) body waves and slow, intermediate frequency (<20 Hz) Scholte waves. The fundamental and first higher mode Scholte waves have both been excited by the implosion source. Here, the Scholte waves are investigated with a full waveform modeling and a group velocity inversion approach. Shear wave velocities for the uppermost layers of the region are inferred and results from the different methods are compared. We find that the full waveform modeling is important to understand the intrinsic attenuation of the Scholte waves between 1 and 20 Hz. The modeling shows that the S-wave velocity varies from 195 to 350 m/s in the first 16 m of the uppermost layer. Depths levels of high S-wave impedance contrasts compare well to the layer depth derived from a P-wave analysis as well as from drilling data. As expected, the P- to S-wave velocity ratio is very high in the uppermost 16 m of the seafloor and the Poisson ratio is nearly 0.5. Depth levels of high S-wave impedance contrasts are comparable to the layer depth derived from drilling data.     

Vegetation and hydraulic-morphological interactions at the individual plant, patch and channel scale

Interactions between vegetation, flow and sediment are a key ingredient for the development of vegetated islands in highly dynamic, fluvial alpine ecosystems such as the Tagliamento River, north-east Italy. There has been substantial research on factors influencing the establishment of vegetation and feedback mechanisms between vegetation, hydraulic, and geomorphological processes in such environments. This has yielded the development of conceptual models identifying different trajectories of vegetation and landform development from bare gravel to established floodplain forest. Nevertheless, some of the finer-scale processes underpinning such interactions are not well understood and parameterisation concepts that augment our knowledge from process understanding to quantified data and prediction models are not available until now. This paper identifies mechanisms and parameters of vegetation-flow interaction at the individual scale that are reflected at a patch or even at the channel scale. These mechanisms are reviewed from a multi-disciplinary perspective and concepts and analogies are proposed that provide ideas to progress research towards the development of predictive vegetation-flow models. Such models must incorporate both hydraulic and ecological components and this is demonstrated for a simplified force-bending model of Salicaceae seedlings. The development of such models demands advances in the individual disciplines of hydraulics, morphology, plant ecology and biomechanics, which offers many possibilities for multidisciplinary research between these disciplines.     

Loading protocols for European regions of low to moderate seismicity

Existing loading protocols for quasi-static cyclic testing of structures are based on recordings from regions of high seismicity. For regions of low to moderate seismicity they overestimate imposed cumulative damage demands. Since structural capacities are a function of demand, existing loading protocols applied to specimens representative of structures in low to moderate seismicity regions might underestimate structural strength and deformation capacity. To overcome this problem, this paper deals with the development of cyclic loading protocols for European regions of low to moderate seismicity. Cumulative damage demands imposed by a set of 60 ground motion records are evaluated for a wide variety of SDOF systems that reflect the fundamental properties of a large portion of the existing building stock. The ground motions are representative of the seismic hazard level corresponding to a 2 % probability of exceedance in 50 years in a European moderate seismicity region. To meet the calculated cumulative damage demands, loading protocols for different structural types and vibration periods are developed. For comparison, cumulative seismic demands are also calculated for existing protocols and a set of records that was used in a previous study on loading protocols for regions of high seismicity. The median cumulative demands for regions of low to moderate seismicity are significantly less than those of existing protocols and records of high seismicity regions. For regions of low to moderate seismicity the new protocols might therefore result in larger strength and deformation capacities and hence in more cost-effective structural configurations or less expensive retrofit measures.     

On the potential for climate change impacts on marine anthropogenic radioactivity in the Arctic regions

Current predictions as to the impacts of climate change in general and Arctic climate change in particular are such that a wide range of processes relevant to Arctic contaminants are potentially vulnerable. Of these, radioactive contaminants and the processes that govern their transport and fate may be particularly susceptible to the effects of a changing Arctic climate. This paper explores the potential changes in the physical system of the Arctic climate system as they are deducible from present day knowledge and model projections. As a contribution to a better preparedness regarding Arctic marine contamination with radioactivity we present and discuss how a changing marine physical environment may play a role in altering the current understanding pertaining to behavior of contaminant radionuclides in the marine environment of the Arctic region.     

Accumulation and effects of benzo(a)pyrene on cytochrome P450 1A in waterborne exposed and intraperitoneal injected juvenile turbot (Scophthalmus maximus)

Juvenile turbot (Scophthalmus maximus) were exposed to benzo(a)pyrene (BaP) for 14 d using a glass bead generator flow-through system. Exposure was followed by a recovery period of 16 d. The highest BaP concentration in the edible portion of the fish, 16.5 ± 4.3 μg BaP/kg, was observed on the first day. Then concentrations dropped following first-order kinetics. BaP was below detection level at the end of the experiment. A statistically significant increase in bile fluorescence was observed from day 9 until the end of the experiment, suggesting the elimination of BaP metabolites by this route. No significant differences between control and exposed fish in EROD activity and CYP1A concentration, measured by immunodetection method, were observed. Intraperitoneal injection of 2.5 mg BaP/kg in juvenile turbot induced EROD activity. Under waterborne experimental conditions, bile fluorescence was observed to be a more sensitive biomarker of BaP exposure than EROD activity and CYP1A measurement.     

Factors Controlling Total Concentration and Aqueous Speciation of Aluminium in an Acidic Headwater Stream of the Bavarian Forest National Park: a Modelling Approach

The purpose of the present paper is to analyse factors controlling total concentration and aqueous speciation of aluminium in the Große Ohe River, using a thermodynamic equilibrium model and a mixing approach. A model compound for humic substances is derived on the basis of the relation between anion deficit and the organic carbon content in the river as well as literature data. An equilibrium speciation model for aluminium is set up, considering this model compound and relevant inorganic solutes. Although the model cannot be verified directly, its results may be viewed as qualitatively correct. Applying the model to measured stream water samples highlights that aqueous speciation of aluminium is mainly controlled by the pH value and discharge and that free aluminium concentrations reach clearly toxic levels during acidic episodes. Comparing measured concentrations of sulfate and H⁺ and calculated concentrations of Al³⁺ with solubility curves of gibbsite like minerals and jurbanite clearly shows that total aluminium concentrations are not controlled by equilibria with these mineral phases alone. The observed relationship can be better explained from a mixture of two distinct waters, representing lowflow and highflow chemistry, and the resulting equilibrium concentrations. This indicates that total aluminium concentration, in particular during high discharge events, is mainly controlled by the mixture of waters with differing chemistry and flowpaths.