气相色谱法测定岩矿试样中有机碳的研究

本文研究了化学氧化、气相色谱法测定岩矿试样中有机碳的转化机理、转化温度、转化时间以及试样中能产生二氧化碳气体的碳酸盐成分的消除等条件，解决了化学处理与仪器测定的衔接问题。所建立的方法具有灵敏度高、准确度好、操作简单、快速等优点，适用于岩矿、水系沉积物等试样中有机碳的测定。     

模糊对象粗糙表达及其空间关系研究

空间数据的模糊性是当前GIS领域研究的难点之一。现有的GIS数据模型基本上还不具备对模糊性进行描述、处理和分析的功能 ,使得GIS对数据的处理容易造成信息损失。把粗糙集和模糊集对空间数据的模糊性和不确定性处理的优势结合起来表达模糊对象 ,即利用粗糙集处理由于知识的粒度性所造成的模糊性和不精确性 ;利用模糊集处理模糊对象原始数据所具有的不确定性 ,从而扩展了空间数据模型对模糊数据的表达能力 ,并详细研究了模糊面与模糊面以及模糊线与模糊面之间的拓扑关系     

天山乌鲁木齐河源区大西沟表土花粉散布特征

在天山乌鲁木齐河源区大西沟垂直植被带表土孢粉分析及植被调查的基础上，对大西沟垂直带的植被与表土孢粉的关系进行了探讨。从表土孢粉百分比含量可划分出4个孢粉带，其对应的植被带分别为高山垫状植被、高山草甸、亚高山草甸和云杉(Picea)林带。孢粉百分含量基本上反映了大西沟地区垂直植被带分布的特征。云杉、麻黄(Ephedra)、藜科(Chenopodiaceae)和蒿属(Artemisia)等植物花粉明显表现为超代表性。山谷上升气流在天山山地垂直植被带的表土孢粉散布中起着重要的作用。     

浅谈新的地质资料汇交内容及其制度

在学习国务院《地质资料管理条例》的基础上，就新的地质资料管理制度方面，重点在地质资料的汇交人、汇交内容、汇交时间、汇交要求、汇交管理机关、汇交管理工作中的法律责任等几方面做了较详细介绍。意在我省进一步贯彻实施《地质资料管理条例》工作中，坚持规范，加深管理。     

新疆伽师强震区余震序列的地震台阵定位

1998年中国地震局地质研究所在伽师强震群区布设了 30台流动宽频带地震台 ,记录到比纳木及龙口两个强震 (M≥ 6 0 )的主震及余震序列。我们利用Geiger法和JHD方法对这两个地震序列进行了台阵定位。结果表明 :1)利用地震台阵数据的JHD定位结果可以较好地确定地震序列的相对空间位置 ,并且比Geiger法有更高的精度 ;2 )比纳木、龙口地震序列勾画出了两条不平行的SWW向断层 ,其走向及产状与相应主震的矩张量研究结果基本吻合 ,此地震序列可作为确定伽师强震群震源断层面的重要参考依据 ;3)比纳木和龙口地震序列发生在壳幔界面的梯度带上及壳内高、低速介质交界部位 ,这表明地震的形成与地壳深部构造环境密切相关 ;4 )伽师强震群具有张性破裂特征 ,其主要原因是塔里木盆地北缘的横向非均匀变形     

首都圈数字地震台网的微震定位实验

新建成的首都圈数字地震台网由 10 7个数字地震台站组成 ,其地震监测和定位能力需要检验。此文主要目的是为评估首都圈数字地震台网的地震活动监测能力提供参考依据。在地震定位中 ,应充分发挥数字地震记录的优势 ,采用相应的数字地震记录处理技术 ,提高地震定位的可靠性和精度。采用滤波、偏振及台站扫描、震相追踪等数字技术 ,提高了震相识别的可靠性和精度 ,并用Geiger方法对 2 0 0 1年首都圈数字地震台网记录到的 7个网内及网缘微震 (ML<2 .0 )进行了精确定位 ,还通过对爆破的定位来检验程序和方法的可靠性和精度。结果表明 ,震中定位误差估计小于2km ,震源深度误差估计小于 3km     

Interaction Between Wind and Snow Surface

The horizontal and vertical wind velocity fluctuations were measured using two sonic anemometers at a height of 135 cm above a snow surface under a transverse snow wave-forming condition. A snow-wave was formed when the wind at a height of 1 m blew at a speed of more than 7 m s⁻¹ after an approximate accumulation of from 10 to 20 cm of new snow on a snowfield. For example, when a snow-wave had a wavelength of 10 m and a wave height of 15 to 20 cm, the measured horizontal and vertical velocity components showed that they had a frequency peak of 0.7 Hz in coherence and co-spectrum corresponding to this wavelength. The results suggest that wind turbulence and snow-wave formation interact with each other.     

Characteristic Features of Tin–iron–copper Mineralization in the Anle-Huanggangliang Mining Area, Inner Mongolia, China

Abstract: The Anle Sn‐Cu and Huanggangliang Fe‐Sn deposits have been exploited in the Linxi district, which is located 165 km northwest of Chifeng City in northern China. In this study the formation mechanisms of the tin deposits in the Anle and Huanggangliang mining area were investigated to understand the mechanisms of tin mineralization in northern China. The veins of the Anle deposit are divided into cassiterite–quartz–chlorite veins, chalcopyrite‐bearing quartz veins, cassi–terite–chalcopyrite–bearing quartz veins and sphalerite‐quartz veins. The sequence of mineralization is tin mineralization (stage I), copper mineralization (stage II), and lead‐zinc mineralization (stage III). The Huanggangliang tin deposit consists of magnetite skarn orebodies and many cassiterite‐bearing feldspar–fluorite veins and veinlets cutting the magnetite orebodies. The fluid inclusions in quartz and fluorite in ores from the Anle and Huanggangliang tin deposits are divided into two‐phase fluid inclusions, vapor‐rich fluid inclusions and poly‐phase fluid inclusions. The final homogenization temperatures of fluid inclusions of quartz in the ores of the Anle deposit and fluorite of tin‐bearing feldspar veins in the Huanggangliang tin deposit range from 195 to 425C and from 215 to 450C, respectively. The fluids responsible for the Anle and Huanggangliang tin deposits were of very high temperature and NaCl‐rich ones containing K, Ca, Al, Si, Ti, Fe and Cl in addition to ore metals such as Sn and Cu. The temperature and chemical composition of fluid in fluid inclusions of igneous rocks in the mining area are very similar to those of fluid in fluid inclusions in the ores of these deposits. The fluid for these ore deposits had a close relation with the fluid coexisting with melt of Late Jurassic granitic rocks in this mining area. Salinities of fluid inclusions from these ore deposits and granitic rocks in the mining area were estimated to range from 35 to 50 wt % NaCl equivalent. Based on arsenopy‐rite geothermometry and fluid inclusion studies, a fluid containing 40 wt% NaCl (eq.) could be formed by phase separation of fluid having 6 wt% NaCl (eq.) at a temperature of 420 to 500C and a pressure of 0.3 to 0.4 kb. The temperatures and pressures presented above indicate an NaCl‐rich magmatic fluid derived from granitic melt that had intruded into a shallow level of crust caused the Sn–Fe–Cu mineralization of the mining area. The geological relationship between these ore deposits and granitic bodies around the ore deposits, and the similarity of fluids forming these ore deposits and coexisting with granitic melt, suggest that these ore deposits were formed by the activity of fluid derived from granitic melt in Late Jurassic age.     

西藏南迦巴瓦峰地区第四纪环境探讨

本文根据西藏南迦巴瓦峰地区第四纪沉积物特征和孢粉分析结果,讨论了环境变化问题。指出,中更新世以来南峰地区抬升约2000—3000米,全新世抬升约600米,并对气候变化作了论述。     

地震走时CT波前追踪

把走时CT结果作为地震衍射CT(DCT)的背景场可以改善DCT之成像质量。本文由Radon变换、泛函分析变分原理和微分几何导出程函方程后,采取有限差分法求解,实行波前追踪。通过对反射地震勘探和VSP 结构的源——接收系统编程实际运算,表明该波前追踪程序输入简单,适合于多层介质模型,各网格点的走时能迅速确定。