Exploring Placer Gold Deposits through Integrated Geophysical and Geochemical Techniques at the Confluence of the Indus and Kabul Rivers, NW Pakistan

Analysis of the anomalous magnetic mineral intensities and geochemistry for placer gold deposits are presented for those of the Attock area at the confluence of the Indus and Kabul rivers in northwestern Pakistan. Two grids covering an area of 10x18 m2 and 8x10 m2 were analyzed using a G-858 Cesium Vapor Magnetometer. The anomalous zones obtained were plotted on contour maps, 2D and 3D magnetic intensity maps. Based on the magnetic anomalies, grid-1 of the study area was sampled at three different anomalous zones for geochemical analysis. These zones contain gold concentrations, ranging from 2.11 ppm to 6.109 ppm with an average of 4.01 ppm. Increase in gold concentration in the subsurface within the anomalous zones indicates that magnetometer survey followed by a geochemical analysis can potentially narrow down the gold-bearing anomalous zones.     

Geochemistry and mineralogical composition of the airborne particles of sand dunes and dust storms settled in Iraq and their environmental impacts

Five dust storms that occurred in 2008 (15 March, 11 April, 28 April, 25, May and 26 June) in addition to the many sand dunes disseminated in the Western Desert of Iraq are sampled. The worse dust storm that occurred in Iraq in 11 April, 2008 covered 75% of the Iraq area and deposited 6.9?million tons approximately as a total weight of fallout during just 8?h, declining temperature 6°C. During the episodes of dust storms, visibility decreased enormously, no more than 30?m. Many people were taken to hospitals after sustaining breathing problems. Some of them died. Clay fraction is the dominant part in the dust storms forming 70% besides a little silt (20.6%) and sand (9.4%), then classified as mature arkose of clay to sandy clay, whereas sand dunes are formed from 72.7% sand, 25.1% silt and 2.19% clay, then classified as mature arkose of silty sand. Sand dunes have much maturity. Mineralogical composition of dust storms and sand dunes are Quartz (49.2%, 67.1%), feldspar (4.9%, 20.9%), calcite (38%, 5%), gypsum (4.8%, 0.4%), dolomite (0.8%, 1%) and heavy minerals (3.2%, 6.6%), respectively. Heavy mineral suites in the dust storms are represented by zircon, pyroxene, hornblende, chlorite and magnetite; whereas the sand dunes are represented by zircon, tourmaline, garnet and pyroxene, concentrated within sand fraction. Heavy minerals according to satellite images revealed the dry land of Sahara Desert in North Africa and the Arabian Peninsula as well as Syria and Jordan were a major source of the dust storms that have occurred in Asia, including Iraq.     

Mineralogy, geochemistry, and reserve estimation of the Euphrates limestone for Portland cement industry at Al-Najaf area, South Iraq

This study deals with the mineralogical and geochemistry of the Euphrates Formation (Lower Miocene) in Bahr Al-Najaf area in order to assess the lithofacies of the Euphrates Formation for Portland cement manufacturing. Petrographic and mineralogical studies were carried out on 210 core samples, collected from 21 boreholes, and showed that calcite is the dominant mineral with few amounts of quartz, gypsum, feldspar, and a rare amount of dolomite. Clay mineral suites (palygorskite, kaolinite, montmorillonite, and illite) formed about 5% from the total mineral composition. Palygorskite precipitated directly in alkali shallow water rich with Si and Mg ions. Chemical weathering of feldspar under acidic conditions participated in formation of Kaolinite. Geochemistry showed that there is no high variation in chemical constituents with depth, and the average of CaO (51.5), MgO (0.83), SO₃ (0.54), SiO₂ (4.3), Fe₂O₃ (0.45), Al₂O₃ (0.93), L.O.I (40.7), Na₂O₃ (0.08), K₂O (0.14), and Cl^- (0.1) qualified the lithofacies of Euphrates Formation to be raw materials suitable for manufacturing the Portland cement. Triangle Block method is applied to estimate the reserve on square area (2?×?2 km²) which is computed to be 63 million tons of medium-tough limestone as potential probable reserve.     

Influence of rainfall infiltration on the stability of unsaturated coal gangue accumulated slope

The slope instability is associated with increasing rate of rainfall infiltration which cause shear strength reduction and suction loss and the slope tend to fa...     

影响三大洲的北非强沙尘暴动力机制WRF-chem模拟与分析北大核心

基于WRF-chem模式对北非2018年3月下旬的典型强沙尘暴过程进行模拟,分析了此次强沙尘发生季节、持续时间、局地特征以及传输路径的关键动力系统与动力机制。鉴于起沙是沙尘暴发生的关键点之一,并且起沙主要取决于风力和下垫面沙源性质,本文测试了三种起沙参数化方案的影响,并将模拟结果与卫星MODIS监测及其再分析资料MERRA-2进行了对比,又经系列统计方法检验。结果显示,宏观思路的起沙方案GOCART比AFWA和UoC两种起沙方案更适合此次大尺度强沙尘暴数值模拟(锋面跨度接近60个经度)。综合沙尘暴关键系统的动力机制分析和数值模拟结果显示,强沙尘暴关键系统为深厚的西风槽、沙尘冷锋锋面和锋后的地面高压反气旋。北非中部深厚的西风槽为后倾槽,该系统稳定,造成沙尘暴持续时间长。沙尘暴锋后反气旋中的下沉气流抑制了扬沙向高层扩散,造成低层能见度恶劣。沙尘锋区结合了动力、热动力以及湿热动力不稳定,因此锋区风力大,地面沙尘驱动力强。而西风槽和强大反气旋依托环流形势,提供了沙尘传输到三大洲的长途输送力。