Least Square Finite Element Method for Viscous Splitting of Unsteady Incompressible Navier–Stokes Equations

In order to solve unsteady incompressible Navier–Stokes(N–S) equations, a new stabilized finite element method,called the viscous-splitting least square FEM, is proposed. In the model, the N–S equations are split into diffusive and convective parts in each time step. The diffusive part is discretized by the backward difference method in time and discretized by the standard Galerkin method in space. The convective part is a first-order nonlinear equation.After the linearization of the nonlinear part by Newton's method, the convective part is also discretized by the backward difference method in time and discretized by least square scheme in space. C~0-type element can be used for interpolation of the velocity and pressure in the present model. Driven cavity flow and flow past a circular cylinder are conducted to validate the present model. Numerical results agree with previous numerical results, and the model has high accuracy and can be used to simulate problems with complex geometry.     

High-precision repeat-groundtrack orbit design and maintenance for Earth observation missions

The focus of this paper is the design and station keeping of repeat-groundtrack orbits for Sun-synchronous satellites. A method to compute the semimajor axis of the orbit is presented together with a station-keeping strategy to compensate for the perturbation due to the atmospheric drag. The results show that the nodal period converges gradually with the increase of the order used in the zonal perturbations up to \(J_{15}\). A differential correction algorithm is performed to obtain the nominal semimajor axis of the reference orbit from the inputs of the desired nodal period, eccentricity, inclination and argument of perigee. To keep the satellite in the proximity of the repeat-groundtrack condition, a practical orbit maintenance strategy is proposed in the presence of errors in the orbital measurements and control, as well as in the estimation of the semimajor axis decay rate. The performance of the maintenance strategy is assessed via the Monte Carlo simulation and the validation in a high fidelity model. Numerical simulations substantiate the validity of proposed mean-elements-based orbit maintenance strategy for repeat-groundtrack orbits.     

局域椭圆偏振光束强聚焦性质的研究

数值计算了局域椭圆偏振光束强聚焦时在焦平面上的横向场强分布、纵向场强分布、横向能流以及纵向角动量分布.结果显示在焦平面上光束总的纵向角动量为零,但在不同象限光束具有不同方向的纵向角动量.当相位延迟角度在0到π之间变化时横向场强分布基本不变,但纵向场强分布有很明显的变化.液晶相位延迟器由外部电压控制,使其相位延迟角度能在0到π之间可以连续取值.因而液晶相位延迟器的外接电压可以实现对焦平面上的纵向场强以及纵向角动量的实时调控.     

Simplified traditional bubble-motion equation and air-gun wavelet simulation based on a Van der Waals gas model

An air-gun source is the most commonly used excitation method in offshore seismic exploration.The excitation characteristics of an air-gun source affect seismic...     

大陆解体与被动陆缘的演化

火山型被动陆缘是大陆解体过程中形成的一类陆缘类型,其演化过程与活动陆缘一样复杂多变。随着近年来对大陆解体过程与被动陆缘演化的深入研究,对其沉积过程、岩浆活动以及变质作用研究都有了很大的进展。陆壳减薄解体的过程有许多不同的模式,不对称的简单剪切模式可能是火山型被动陆缘的成因,其机制是软流圈隆起的最大位置从剖面上看与地壳减薄最大位置不在一条垂线上,造成软流圈上升的岩浆在解体的大陆一侧形成火山型被动陆缘。被动陆缘的沉积建造由两套沉积物组成,一套是大陆解体的裂谷阶段所形成的陆相沉积物和双模式火山岩组合,另一套是稳定陆缘的复理石组合;岩浆作用中基性岩类反应了物质直接源于上地幔的主要特点,并有部分受到地壳混染的特征;变质作用中高温低压环境主要发生在裂谷作用阶段,其特点反映了大陆解体过程中随着时间的增温和减压过程,而拆离伸展阶段则被脆性变形所代替。     

一种能大量消耗粉煤灰的多孔材料的初步研究

以武汉青山热电厂的粉煤灰为原料制作多孔材料.其中的两种样品的孔隙率分别为45.8%和61%.该材料可作为一种消音和隔热材料用于高速公路和城乡建设, 从而大量消耗粉煤灰以达到保护环境的目的      

中子活化分析在铼—锇法年龄测定中的应用

同位素稀释中子活化分析铼与感耦等离子体质谱法测定锇相结合，应用于辉钼矿及铜＿镍硫化物矿物的铼＿锇年龄测定，取得了满意的结果，扩大了铼＿锇测年法的应用范围。     

若尔盖铀矿床含矿热液性质的热力学研究

作者利用热力学方法研究了若尔盖铀矿床含矿热液的特性。研究结果表明，初始含矿热液具有高温高压性质，来源于深部，而不是大气降水或由大气降水成因的地下水，随着含矿热液的演化，从早阶段到晚阶段，其温度、压力、碱度及氧逸度降低，而氧化还原电位升高，说明铀在相对还原条件下迁移，而在相对氧化的成矿环境中被还原。     

广西资源县车田湾热泉水化学和同位素特征研究

本文通过多种方法对车田湾热泉的水、热来源和循环途径进行了探索性的研究,除采用综合地质及同位素分析方法外,还引入了近年发展起来的碳循环研究方法。结果显示: 该区热泉(群)的水来源于大气降雨;碳同位素分析结果则显示,热水中碳的来源与深部关系不密切;钻孔测井资料显示,水、热的强循环深度在60m 和80～ 100m。由于各泉或钻孔所处的岩性、地质构造和水文地质条件不同,因此它们在水化学及其动态特征、同位素特征等方面具有一定差异。      

基于GIS的岩溶地区水土流失遥感定量监测研究——以贵州省(原)安顺市为例

本文主要介绍了基于GIS的水土流失定量评价模型的组成、各参数因子的算式算法 ,以及该模型在贵州省 (原 )安顺市的应用结果。模型是以修正的通用土壤流失方程 (RUSLE)为核心 ,在GIS中建立模型各因子空间数据 ,并通过PAMAP对它们进行综合分析。定量评价结果表明 ,(原 )安顺市年平均土壤流失总量为 86777吨 ,平均侵蚀模数为 4 0 9.4t/km2 ·a;轻度以上侵蚀面积 72 .7km2 ,强度以上侵蚀面积 53 .2km2 (含剧烈侵蚀面积 3 0 .9km2 )。其平均侵蚀模数与以往实测调查结果相比有 97.5%的一致性 ,表明该方法在贵州省岩溶地区的水土流失监测中具有较高的可靠性。