Multivariate Analysis of an LA-ICP-MS Trace Element Dataset for Pyrite

Application of multivariate statistics to trace element datasets is reviewed using 164 multi-element LA-ICP-MS spot analyses of pyrite from the Moonlight epithermal gold prospect, Queensland, Australia. Multivariate analysis of variance (MANOVA) is used to demonstrate that classification of pyrite on morphological and other non-numeric factors is geochemically valid. Parallel coordinate plots and correlation cluster analysis using Spearman??s coefficients are used to discover unexpected elemental relationships without making assumptions a priori. Finally, principal component analysis and factor analysis are used to demonstrate the presence of sub-classes of pyrite. Corroborated with geological data, statistical analysis provides evidence for successive generations of hydrothermal fluids, each introducing specific metals, and for partial or complete replacement of different minerals. The data permit reinterpretation of Moonlight as a telescoped system where epithermal-Au (± base metals) is superposed onto early porphyry-Mo mineralization.     

Comparative study of methods for WHPA delineation

Human activities, whether agricultural, industrial, commercial, or domestic, can contribute to ground water quality deterioration. In order to protect the ground water exploited by a production well, it is essential to develop a good knowledge of the flow system and to adequately delineate the area surrounding the well within which potential contamination sources should be managed. Many methods have been developed to delineate such a wellhead protection area (WHPA). The integration of more information on the geologic and hydrogeologic characteristics of the study area increases the precision of any given WHPA delineation method. From a practical point of view, the WHPA delineation methods allowing the simplest and least expensive integration of the available information should be favored. This paper presents a comparative study in which nine different WHPA delineation methods were applied to a well and a spring in an unconfined granular aquifer and to a well in a confined highly fractured rock aquifer. These methods range from simple approaches to complex computer models. Hydrogeological mapping and numerical modeling with MODFLOW-MODPATH were used as reference methods to respectively compare the delineation of the zone of contribution and the zone of travel obtained from the various WHPA methods. Although applied to simple ground water flow systems, these methods provided a relatively wide range of results. To allow a realistic delineation of the WHPA in aquifers of variable geometry, a WHPA delineation method should ensure a water balance and include observed or calculated regional flow characteristics.     

Oceanic influences on recent continental warming

Evidence is presented that the recent worldwide land warming has occurred largely in response to a worldwide warming of the oceans rather than as a direct response to increasing greenhouse gases (GHGs) over land. Atmospheric model simulations of the last half-century with prescribed observed ocean temperature changes, but without prescribed GHG changes, account for most of the land warming. The oceanic influence has occurred through hydrodynamic-radiative teleconnections, primarily by moistening and warming the air over land and increasing the downward longwave radiation at the surface. The oceans may themselves have warmed from a combination of natural and anthropogenic influences.     

FeO*-Al2O3-TiO2-Rich Rocks of the Tertiary Bana Igneous Complex, West Cameroon

FeO*‐Al₂O₃‐TiO₂‐rich rocks are found associated with transitional tholeiitic lava flows in the Tertiary Bana plutono‐volcanic complex in the continental sector of the Cameroon Line. These peculiar rocks consist principally of iron‐titanium oxides, aluminosilicates and phosphates, and occur as layers 1–3 m thick occupying the upper part of lava flows on the southwest (site 1) and northwest (site 2) sites of the complex. Mineral constituents of the rocks include magnetite, ilmenite, hematite, rutile, corundum, andalusite, sillimanite, cordierite, quartz, plagioclase, alkali feldspar, apatite, Fe‐Mn phosphate, Al phosphate, micas and fine mixtures of sericite and silica. Texturally and compositionally, the rocks can be subdivided into globular type, banded type, and Al‐rich fine‐gained massive type. The first two types consist of dark globule or band enriched in Fe‐Ti oxides and apatite and lighter colored groundmass or bands enriched in aluminosilicates and quartz, respectively. The occurrence of andalusite and sillimanite and the compositional relations of magnetite and ilmenite in the FeO*‐Al₂O₃‐TiO₂‐rich rocks suggest temperatures of crystallization in a range of 690–830°C at low pressures. The Bana FeO*‐Al₂O₃‐TiO₂‐rich rocks are characterized by low concentrations of SiO₂ (25–54.2 wt%), Na₂O + K₂O (0–1%), CaO (0–2%) and MgO (0–0.5%), and high concentrations of FeO* (total iron as FeO, 20–42%), Al₂O₃ (20–42%), TiO₂ (3–9.2%), and P₂O₅ (0.26–1.30%). TiO₂ is positively correlated with Al₂O₃ and inversely correlated with FeO*. The bulk rock compositions cannot be derived from the associated basaltic magma by crystal fractionation or by partial melting of the mantle or lower crustal materials. In ternary diagrams of (Al₂O₃)?(CaO + Na₂O + K₂O)?(FeO*+ MnO + MgO) and (SiO₂)?(FeO*)?(Al₂O₃), the compositional field of the rocks is close to that of laterite and is distinct from the common volcanic rocks, suggesting that the rocks are derived from lateritic materials by recrystallization when the materials are heated by the basaltic magmas. A hydrothermal origin is discounted because the rocks contain high‐temperature mineral assemblages and lack sulfide minerals. It is proposed that the FeO*‐Al₂O₃‐TiO₂‐rich rocks of the Bana complex were formed by pyrometamorphism of laterite by the heat of basaltic magmas.     

Prediction of the effects of size and morphology on the structure of water around hematite nanoparticles

Compared with macroscopic surfaces, the structure of water around nanoparticles is difficult to probe directly. We used molecular dynamics simulations to investigate the effects of particle size and morphology on the time-averaged structure and the dynamics of water molecules around two sizes of hematite (α-Fe₂O₃) nanoparticles. Interrogation of the simulations via atomic density maps, radial distribution functions and bound water residence times provide insight into the relationships between particle size and morphology and the behavior of interfacial water. Both 1.6 and 2.7 nm particles are predicted to cause the formation of ordered water regions close to the nanoparticle surface, but the extent of localization and ordering, the connectivity between regions of bound water, and the rates of molecular exchange between inner and outer regions are all affected by particle size and morphology. These findings are anticipated to be relevant to understanding the rates of interfacial processes involving water exchange and the transport of aqueous ions to surface sites.     

Two‐dimensional lower bound analysis of offshore pile foundation systems

The objective of this paper is to present a simplified method to determine the pile foundation system capacity based on the lower bound theorem of plasticity. The motivations for determining the lower bound capacity are the following: (1) to evaluate the accuracy of solutions based on the upper bound method; (2) to provide a conservative and efficient solution to the system capacity; and (3) to provide information about load distribution among individual piles at the verge of failure for the pile system. The failure mechanisms for a single pile and for the pile system are assumed to be two‐dimensional. For a typical long offshore pile, the upper and lower bound analyses produce identical lateral capacities. A simplified failure surface for loads at the single pile head is proposed and verified through analysis of 16 case study piles. With this proposed failure surface for a single pile, the lower bound failure load of the pile foundation system is obtained using the elastic compensation method enhanced with the linear matching method. Comparing with the existing upper bound and finite element solutions, the proposed lower bound method is capable of accurately and efficiently predicting the ultimate capacity of a pile foundation system. Copyright © 2015 John Wiley & Sons, Ltd.     

Ceres lightcurve analysis—Period determination

The sidereal period of Ceres is refined from 9.075 h to 9.074170±0.000002, making use of recent and historical lightcurves spanning almost 50 years. An observed increase in the amplitude of the lightcurve with solar phase angle is consistent with bright, discrete albedo features contributing a greater fraction of light as the defect of illumination increases. Observations near the same phase angle over this time span show no evidence of changes that would indicate active surface processes.     

Testing Nano-Powder and Fused-Glass Mineral Reference Materials for In Situ Rb-Sr Dating of Glauconite,Phlogopite, Biotite and Feldspar via LA-ICP-MS/MS

Reference materials (RMs) with well-characterised composition are necessary for reliable quantification and quality control of isotopic analyses of geological samples. For in situ Rb-Sr analysis of silicate minerals via laser ablation inductively coupled plasma tandem mass spectrometry (LA-ICP-MS/MS) with a collision/reaction cell, there is a general lack of mineral-specific and matrix-matched RMs, which limits wider application of this new laser-based dating technique to certain minerals. In this work, pressed nano-powder pellets (NP) of four RMs, GL-O (glauconite), Mica-Mg (phlogopite), Mica-Fe (biotite) and FK-N (K-feldspar), were analysed and tested for in situ Rb-Sr dating, complemented by isotope dilution (ID) MC-ICP-MS Rb-Sr analyses of GL-O and Mica-Mg. In addition, we attempted to develop alternative flux-free and fused ‘mineral glasses’ from the above RMs for in situ Rb-Sr dating applications. Overall, the results of this study showed that among the above RMs only two NP (Mica-Mg-NP and GL-O-NP) were suitable and robust for in situ dating applications. These two nano-powder reference materials, Mica-Mg-NP and GL-O-NP, were thus used as primary RMs to normalise and determine Rb-Sr ages for three natural minerals: MDC phlogopite and GL-O glauconite grains, and also Mica-Fe-NP (biotite). Our in situ analyses of the above RMs yielded Rb-Sr ages that are in good agreement (within 8%) of published ages, which suggests that both Mica-Mg-NP and GL-O-NP are suitable RMs for in situ Rb-Sr dating of phlogopite, glauconite and biotite. However, using secondary RMs is recommended to monitor the quality of the obtained ages.     

Modelling two‐dimensional steady‐state groundwater flow and flow sensitivity to boundary conditions in blanket peat complexes

This study used a two‐dimensional steady‐state finite‐element groundwater flow model to simulate groundwater flow in two Newfoundland blanket peat complexes and to examine flow system sensitivity to changes in water table recharge and aquifer properties. The modelling results were examined within the context of peat‐forming processes in the two complexes. Modelled flow compared favourably with observed flow. The sensitivity analyses suggested that more highly decomposed bog peat along bog margins probably has/had a positive impact on net peat accumulation within bog interiors. Peat with lower hydraulic conductivity along bog margins effectively impedes lateral drainage, localizes water table drawdown to extreme bog margins, and elevates water tables along bog interiors. Peat formation and elevated water tables in adjacent poor fens/laggs currently rely on placic and ortstein horizons impeding vertical drainage and water flow inputs from adjacent bogs. Modest reductions in atmospheric recharge were found to govern bog‐flow‐system geometries in a way that would adversely affect paludification processes in adjacent fens/laggs. Copyright © 2004 John Wiley & Sons, Ltd.