Aquifer Storage Recovery (ASR) of chlorinated municipal drinking water in a confined aquifer

About 1.02 × 10⁶ m³ of chlorinated municipal drinking water was injected into a confined aquifer, 94–137 m below Roseville, California, between December 2005 and April 2006. The water was stored in the aquifer for 438 days, and 2.64 × 10⁶ m³ of water were extracted between July 2007 and February 2008. On the basis of Cl⁻ data, 35% of the injected water was recovered and 65% of the injected water and associated disinfection by-products (DBPs) remained in the aquifer at the end of extraction. About 46.3 kg of total trihalomethanes (TTHM) entered the aquifer with the injected water and 37.6 kg of TTHM were extracted. As much as 44 kg of TTHMs remained in the aquifer at the end of extraction because of incomplete recovery of injected water and formation of THMs within the aquifer by reactions with free-chlorine in the injected water. Well-bore velocity log data collected from the Aquifer Storage Recovery (ASR) well show as much as 60% of the injected water entered the aquifer through a 9 m thick, high-permeability layer within the confined aquifer near the top of the screened interval. Model simulations of ground-water flow near the ASR well indicate that (1) aquifer heterogeneity allowed injected water to move rapidly through the aquifer to nearby monitoring wells, (2) aquifer heterogeneity caused injected water to move further than expected assuming uniform aquifer properties, and (3) physical clogging of high-permeability layers is the probable cause for the observed change in the distribution of borehole flow. Aquifer heterogeneity also enhanced mixing of native anoxic ground water with oxic injected water, promoting removal of THMs primarily through sorption. A 3 to 4-fold reduction in TTHM concentrations was observed in the furthest monitoring well 427 m downgradient from the ASR well, and similar magnitude reductions were observed in depth-dependent water samples collected from the upper part of the screened interval in the ASR well near the end of the extraction phase. Haloacetic acids (HAAs) were completely sorbed or degraded within 10 months of injection.     

A critical evaluation of oxidation versus reduction during metamorphism of L and LL group chondrites,and implications for asteroid spectroscopy

Abstract— Modal mineralogies of individual, equilibrated (petrologic type 4–6 L and LL chondrites have been measured using an electron microprobe mapping technique, and the chemical compositions of coexisting silicate minerals have been analyzed. Progressive changes in the relative abundances and in the molar Fe/Mn and Fe/Mg ratios of olivine, low‐Ca pyroxene, and diopside occur with increasing metamorphic grade. Variations in olivine/low‐Ca pyroxene ratios (Ol/Px) and in metal abundances and compositions with petrologic type support the hypothesis that oxidation of metallic iron accompanied thermal metamorphism in ordinary chondrites. Modal Ol/Px ratios are systematically lower than normative Ol/Px ratios for the same meteorites, suggesting that the commonly used C.I.P.W. norm calculation procedure may not adequately estimate silicate mineral abundances in reduced chondrites. Ol/Px ratios calculated from visible and near‐infrared (VISNIR) reflectance spectra of the same meteorites are not in agreement with other Ol/Px determinations, possibly because of spectral complexities arising from other minerals in chondrites. Characteristic features in VISNIR spectra are sensitive to the proportions and compositions of olivine and pyroxenes, the minerals most affected by oxidative metamorphism. This work may allow spectral calibration for the determination of mineralogy and petrologic type, and thus may be useful for spectroscopic studies of asteroids.     

High-temperature emplacement of the Cerro Galán and Toconquis Group ignimbrites (Puna plateau,NW Argentina) determined by TRM analyses

Estimates of pyroclastic flow emplacement temperatures in the Cerro Galán ignimbrite and Toconquis Group ignimbrites were determined using thermal remanent magnetization of lithic clasts embedded within the deposits. These ignimbrites belong to the Cerro Galán volcanic system, one of the largest calderas in the world, in the Puna plateau, NW Argentina. Temperature estimates for the 2.08-Ma Cerro Galán ignimbrite are retrieved from 40 sites in 14 localities (176 measured clasts), distributed at different distances from the caldera and different stratigraphic heights. Additionally, temperature estimates were obtained from 27 sample sites (125 measured clasts) from seven ignimbrite units forming the older Toconquis Group (5.60–4.51 Ma), mainly outcropping along a type section at Rio Las Pitas, Vega Real Grande. The paleomagnetic data obtained by progressive thermal demagnetization show that the clasts of the Cerro Galán ignimbrite have one single magnetic component, oriented close to the expected geomagnetic field at the time of emplacement. Results show therefore that most of the clasts acquired a new magnetization oriented parallel to the magnetic field at the moment of the ignimbrite deposition, suggesting that the clasts were heated up to or above the highest blocking temperature (T _b) of the magnetic minerals (T _b = 580°C for magnetite; T _b = 600–630°C for hematite). We obtained similar emplacement temperature estimations for six out of the seven volcanic units belonging to the Toconquis Group, with the exception of one unit (Lower Merihuaca), where we found two distinct magnetic components. The estimation of emplacement temperatures in this latter case is constrained at 580–610°C, which are lower than the other ignimbrites. These estimations are also in agreement with the lowest pre-eruptive magma temperatures calculated for the same unit (i.e., 790°C; hornblende–plagioclase thermometer; Folkes et al. 2011b). We conclude that the Cerro Galán ignimbrite and Toconquis Group ignimbrites were emplaced at temperatures equal to or higher than 620°C, except for Lower Merihuaca unit emplaced at lower temperatures. The homogeneity of high temperatures from proximal to distal facies in the Cerro Galán ignimbrite provides constraints for the emplacement model, marked by a relatively low eruption column, low levels of turbulence, air entrainment, surface–water interaction, and a high level of topographic confinement, all ensuring minimal heat loss.     

Geochemistry of coral from Papua New Guinea as a proxy for ENSO ocean–atmosphere interactions in the Pacific Warm Pool

A Porites sp. coral growing offshore from the Sepik and Ramu Rivers in equatorial northern Papua New Guinea has yielded an accurate 20-year history (1977–1996) of sea surface temperature (SST), river discharge, and wind-induced mixing of the upper water column. Depressions in average SSTs of about 0.5–1.0 °C (indicated by coral Sr/Ca) and markedly diminished freshwater runoff to the coastal ocean (indicated by coral δ¹⁸O, δ¹³C and UV fluorescence) are evident during the El Niño – Southern Oscillation (ENSO) events of 1982–1983, 1987 and 1991-1993. The perturbations recorded by the coral are in good agreement with changes in instrumental SST and river discharge/precipitation records, which are known to be diagnostic of the response of the Pacific Warm Pool ocean–atmosphere system to El Niño. Consideration of coastal ocean dynamics indicates that the establishment of northwest monsoon winds promotes mixing of near-surface waters to greater depths in the first quarter of most years, making the coral record sensitive to changes in the Asian–Australian monsoon cycle. Sudden cooling of SSTs by 1°C following westerly wind episodes, as indicated by the coral Sr/Ca, is consistent with greater mixing in the upper water column at these times. Furthermore, the coral UV fluorescence and oxygen isotope data indicate minimal contribution of river runoff to surface ocean waters at the beginning of most years, during the time of maximum discharge. This abrupt shift in flood-plume behaviour appears to reflect the duration and magnitude of northwest monsoon winds, which tend to disperse flood plume waters to a greater extent in the water column when wind-mixing is enhanced. Our results suggest that a multi-proxy geochemical approach to the production of long coral records should provide comprehensive reconstructions of tropical paleoclimate processes operating on interannual timescales.     

Using the geologic setting of talc deposits as an indicator of amphibole asbestos content

This study examined commercial talc deposits in the U.S. and their amphibole-asbestos content. The study found that the talc-forming environment directly influenced the amphibole and amphibole-asbestos content of the talc deposit. Large talc districts in the U.S. have mined hydrothermal talcs that replaced dolostone. Hydrothermal talcs, created by siliceous fluids heated by magmas at depth, consistently lack amphiboles as accessory minerals. In contrast, mineable talc deposits that formed by contact or regional metamorphism consistently contain amphiboles, locally as asbestiform varieties. Examples of contact metamorphic deposits occur in Death Valley, California; these talc-tremolite deposits contain accessory amphibole-asbestos. Talc bodies formed by regional metamorphism always contain amphiboles, which display a variety of compositions and habits, including asbestiform. Some industrial mineral deposits are under scrutiny as potential sources of accessory asbestos minerals. Recognizing consistent relations between the talc-forming environment and amphibole-asbestos content may be used in prioritizing remediation or monitoring of abandoned and active talc mines.     

A comparison of unsupervised segmentation parameter optimization approaches using moderate- and high-resolution imagery

Unsupervised segmentation optimization methods have been proposed to aid in selecting an “optimal” set of scale parameters quickly and objectively for object-based image analysis. The goal of this study was to qualitatively assess three unsupervised approaches using both moderate-resolution Landsat and high-resolution Ikonos imagery from two study sites with different landscape characteristics to demonstrate the continued need for analyst intervention during the segmentation process. The results demonstrate that these methods selected parameters that were optimal for the scene which varied with method, image type, and site complexity. Several takeaways from this exercise are as follows: (1) some methods do not work as intended, (2) single-scale unsupervised optimization procedures cannot be expected to properly segment all the features of interest in the image every time, and (3) many multi-scale approaches require subjectively chosen weights or thresholds or additional testing to determine those values that meet the objective. Visual inspection of segmentation results is still required in order to assess over and under-segmentation as no method can be expected to select the best parameters for land cover classifications every time. These approaches should instead be used to narrow down parameter values in order to save time.     

Modeling Bedload Transport of Juvenile Bivalves: Predicted Changes in Distribution and Scale of Postlarval Dispersal

The potential consequences of bedload transport of postlarvae for patterns of distribution of marine invertebrates were explored by developing a bedload transport model for juvenile bivalves in a small estuary in New Jersey, USA. A simple numerical model of tidal current hydrodynamics was developed based on field measurements of shear stresses near the bottom. Burrowing behavior of bivalves was incorporated into the model of bedload transport by using estimates of entrainment rates of Gemma gemma and Mya arenaria in a laboratory flume, and jump lengths of the bivalves were estimated by methods previously developed for noncohesive particles. Based on the flood domination and strong gradient of shear stresses in the Navesink estuary, our model predicted that juvenile bivalves would accumulate in the center of the estuary, traveling up to several kilometers over 30 days. Field distributions of juvenile bivalves were consistent with the model predictions for other species of bivalves but not for G. gemma, for which field distributions of both <500- and >500-μm individuals were concentrated in the eastern end of the estuary. Differences between the bedload model and G. gemma distributions suggest that spatial variation in burrowing behavior or biological interactions are playing an important role in maintaining distribution patterns of this species in spite of high levels of bedload transport. This modeling approach is applicable to other juvenile benthic invertebrates that disperse as bedload and is a useful model against which to compare field observations of rates of transport and patterns of distribution and abundance.     

Paragenesis and geochemistry of ore minerals in the epizonal gold deposits of the Yangshan gold belt,West Qinling,China

Six epizonal gold deposits in the 30-km-long Yangshan gold belt, Gansu Province are estimated to contain more than 300 t of gold at an average grade of 4.76 g/t and thus define one of China's largest gold resources. Detailed paragenetic studies have recognized five stages of sulfide mineral precipitation in the deposits of the belt. Syngenetic/diagenetic pyrite (Py₀) has a framboidal or colloform texture and is disseminated in the metasedimentary host rocks. Early hydrothermal pyrite (Py₁) in quartz veins is disseminated in metasedimentary rocks and dikes and also occurs as semi-massive pyrite aggregates or bedding-parallel pyrite bands in phyllite. The main ore stage pyrite (Py₂) commonly overgrows Py₁ and is typically associated with main ore stage arsenopyrite (Apy₂). Late ore stage pyrite (Py₃), arsenopyrite (Apy₃), and stibnite occur in quartz ± calcite veins or are disseminated in country rocks. Post-ore stage pyrite (Py₄) occurs in quartz ± calcite veins that cut all earlier formed mineralization. Electron probe microanalyses and laser ablation-inductively coupled plasma mass spectrometry analyses reveal that different generations of sulfides have characteristic of major and trace element patterns, which can be used as a proxy for the distinct hydrothermal events. Syngenetic/diagenetic pyrite has high concentrations of As, Au, Bi, Co, Cu, Mn, Ni, Pb, Sb, and Zn. The Py₀ also retains a sedimentary Co/Ni ratio, which is distinct from hydrothermal ore-related pyrite. Early hydrothermal Py₁ has high contents of Ag, As, Au, Bi, Cu, Fe, Sb, and V, and it reflects elevated levels of these elements in the earliest mineralizing metamorphic fluids. The main ore stage Py₂ has a very high content of As (median value of 2.96 wt%) and Au (median value of 47.5 ppm) and slightly elevated Cu, but relatively low values for other trace elements. Arsenic in the main ore stage Py₂ occurs in solid solution. Late ore stage Py₃, formed coevally with stibnite, contains relatively high As (median value of 1.44 wt%), Au, Fe, Mn, Mo, Sb, and Zn and low Bi, Co, Ni, and Pb. The main ore stage Apy₂, compared to late ore stage arsenopyrite, is relatively enriched in As, whereas the later Apy₃ has high concentrations of S, Fe, and Sb, which is consistent with element patterns in associated main and late ore stage pyrite generations. Compared with pyrite from other stages, the post-ore stage Py₄ has relatively low concentrations of Fe and S, whereas As remains elevated (2.05～3.20 wt%), which could be interpreted by the substitution of As^? for S in the pyrite structure. These results suggest that syngenetic/diagenetic pyrite is the main metal source for the Yangshan gold deposits where such pyrite was metamorphosed at depth below presently exposed levels. The ore-forming elements were concentrated into the hydrothermal fluids during metamorphic devolatilization, and subsequently, during extensive fluid–rock interaction at shallower levels, these elements were precipitated via widespread sulfidation during the main ore stage.     

Settlement and Recruitment Patterns of the Soft-Shell Clam, <Emphasis Type="Italic">Mya arenaria</Emphasis>, on the Northern Shore of the Bay of Fundy,Canada

To examine the roles of settlement and early postsettlement processes in the recruitment of the soft-shell clam, Mya arenaria, abundance of recent settlers and juveniles was monitored over two field seasons at four locations on the northern shore of the Bay of Fundy in New Brunswick, Canada. Results showed great spatial and temporal variability in patterns of settlement. M. arenaria appeared to become highly vulnerable to postsettlement processes at a shell length of approximately 2 mm. Postsettlement processes drastically altered patterns of settlement less than 1 year after they were established. Results suggest that local factors at specific sites within the Bay of Fundy, such as hydrodynamics, larval behavior, and early postsettlement events, likely control the abundance of juvenile clams. Additionally, postsettlement events are extremely important in shaping M. arenaria populations in this area. Very few mature adult clams greater than 50 mm in shell length were found at any sampling sites, and no relationship was found between abundance of setters and density of juveniles and adults.