Drainage spacing regularity on a fault-block: A case study from the eastern Ruahine Range

Abstract:  Recent research has indicated river basin outlets draining linear sections of large, uplifting mountain belts often show a regularity of spacing, transverse to the main structural trend. A morphometric analysis of part of the Ruahine Range, on the North Island was undertaken to test whether drainage regularity may exist in smaller, younger mountain ranges. The ratio, R , of the half-width of the mountain belt, W , and the outlet spacing, S , was used to characterize drainage networks on the eastern side of the range. The spacing ratio for the range of 1.31 is lower than R results from studies of larger mountain belts ( R  = 1.91–2.23). We suggest the cause of this lower ratio is related to eastward migration of the Ruahine drainage divide.     

Freshwater inundation effects on emergent vegetation of a hypersaline salt marsh

The coastal marshlands of the Nueces estuary, Texas depend upon periodic freshwater inundation to support current community structure and promote further establishment and expansion of emergent halophytes. Decades of watershed modifications have dramatically decreased freshwater discharge into the upper estuary resulting in hypersaline and dry conditions. In an attempt to partially restore inflow, the U.S. Bureau of Reclamation excavated two overflow channels re-connecting the Nueces River to the marshlands. Freshwater-mediated (precipitation and inflow) changes in tidal creek and porewater salinity and emergent marsh vegetation were examined over a 5-yr period at three stations in the upper Nueces Marsh with the aid of a Geographical Information System (GIS). Two stations were potentially subjected to freshwater inflow through the channels, while one station experienced only precipitation. Decreased tidal creek and porewater salinity were significantly correlated with increased freshwater at all stations (R²=0.37 to 0.56), although porewater salinities remained hypersaline. GIS analyses indicated the most considerable vegetation change following freshwater inundation was increased cover of the annual succulentSalicornia bigelovii. Fall inundation allowed seed germination and rapid expansion of this species into previously bare areas during the subsequent winter and following spring. The station affected by both inflow and precipitation exhibited greaterS. bigelovii cover than the station affected solely by precipitation in both spring 1999 (58. 7% compared to 27.9%) and 2000 (48.6% compared to 1.9%). Percent cover of the perennialBatis maritima temporarily increased after periods of consistent rainfall. The response was short term, and cover quickly returned to pre-inundation conditions within 3 mo. Prolonged inundation led to longterm (>2yr) decreases in percent cover ofB. maritima. Our results suggest that the timing and quantity of freshwater inundation strongly dictate halophyte response to precipitation and inflow. Brief periods of freshwater inundation that occur at specific times of year alleviate stress and promote seed germination and growth, but extended soil saturation can act as a disturbance that has a negative impact on species adapted to hypersaline conditions.     

Can flat-ramp-flat fault geometry be inferred from fold shape?: A comparison of kinematic and mechanical folds

The inference of fault geometry from suprajacent fold shape relies on consistent and verified forward models of fault-cored folds, e.g. suites of models with differing fault boundary conditions demonstrate the range of possible folding. Results of kinematic (fault-parallel flow) and mechanical (boundary element method) models are compared to ascertain differences in the way the two methods simulate flexure associated with slip along flat-ramp-flat geometry. These differences are assessed by systematically altering fault parameters in each model and observing subsequent changes in the suprajacent fold shapes. Differences between the kinematic and mechanical fault-fold relationships highlight the differences between the methods. Additionally, a laboratory fold is simulated to determine which method might best predict fault parameters from fold shape. Although kinematic folds do not fully capture the three-dimensional nature of geologic folds, mechanical models have non-unique fold-fault relationships. Predicting fault geometry from fold shape is best accomplished by a combination of the two methods.     

Oxygen isotope systematics in Diploastrea heliopora: new coral archive of tropical paleoclimate

Diploastrea heliopora forms dense, robust, dome-shaped coral colonies throughout the reef ecosystems of the tropical Pacific and Indian Oceans. This slow-growing (2 to 6 mm/yr) coral has the potential to yield continuous paleoclimate records spanning up to 1000 yr for the warmest waters on Earth, the Indo-Pacific Warm Pool, and has a long fossil history as a single recognizable species. Despite the potential of Diploastrea to be an important new paleoclimate archive, little is known about the systematics of geochemical tracers incorporated into its skeleton. To fill this knowledge gap, we compared skeletal δ¹⁸O signatures in live Diploastrea and Porites colonies from Southwest Lagoon, near Amédée Lighthouse, New Caledonia (at the southern latitudinal limit for Diploastrea) and Alor, Indonesia (in the core area of the Indo-Pacific Warm Pool). We designed a new microsampling technique to minimize smoothing and distortion of the isotopic records due to the complex calyx architecture and slow growth of Diploastrea. High-resolution isotope profiles from the septal portion of the Diploastrea corallite are attenuated, whereas those restricted to the central columella are similar in quality to those extracted from the well-established Porites coral archive. The δ¹⁸O-temperature relationship for the columellar portion of Diploastrea (−0.18‰/°C) is in good agreement with that derived for a nearby Porites (−0.19‰/°C; Quinn et al., 1996), on the basis of comparison with an in situ sea surface temperature record from Amédée Lighthouse. There is a measurable difference of 0.3 ± 0.1‰ between the kinetic/biological disequilibrium offsets from seawater δ¹⁸O composition for Diploastrea and Porites. Despite this offset in mean δ¹⁸O, Diploastrea accurately records the regional differences in mean temperature and salinity between New Caledonia and the Indo-Pacific Warm Pool. Additional tests show that Diploastrea records El Niño-Southern Oscillation (ENSO) interannual variability in sea surface temperature and salinity across the southwestern Pacific, indicating that it should yield dependable paleo-ENSO records. Based on these results, we propose that D. heliopora has the potential to provide an important new coral archive of tropical paleoclimate.     

New palaeogeographic and lake-level reconstructions of Lake Tanganyika: implications for tectonic, climatic and biological evolution in a rift lake

Palaeogeographic and lake-level reconstructions provide powerful tools for evaluating competing scenarios of biotic, climatic and geological evolution within a lake basin. Here we present new reconstructions for the northern Lake Tanganyika subbasins, based on reflection seismic, core and outcrop data. Reflection seismic radiocarbon method (RSRM) age estimates provide a chronological model for these reconstructions, against which yet to be obtained age dates based on core samples can be compared. A complex history of hydrological connections and changes in shoreline configuration in northern Lake Tanganyika has resulted from a combination of volcanic doming, border fault evolution and climatically induced lake-level fluctuations. The stratigraphic expression of lake-level highstands and lowstands in Lake Tanganyika is predictable and cyclic (referred to here as Capart Cycles), but in a pattern that differs profoundly from the classic Van Houten cycles of some Newark Supergroup rift basins. This difference results from the extraordinary topographic relief of the Western Rift lakes, coupled with the rapidity of large-scale lake-level fluctuations. Major unconformity surfaces associated with Lake Tanganyika lowstands may have corresponded with high-latitude glacial maxima throughout much of the mid- to late Pleistocene.
Rocky shorelines along the eastern side of the present-day Ubwari Peninsula (Zaire) appear to have had a much more continuous existence as littoral rock habitats than similar areas along the north-western coastline of the lake (adjacent to the Uvira Border Fault System), which in turn are older than the rocky shorelines of the north-east coast of Burundi. This model of palaeogeographic history will be of great help to biologists trying to clarify the evolution of endemic invertebrates and fish in the northern basin of Lake Tanganyika.
     

An experimental study of the formation of metallic iron in chondrules

The abundance of metallic iron is highly variable in different kinds of chondrites. The precise mechanism by which metal fractionation occurred and its place in time relative to chondrule formation are unknown. As metallic iron is abundant in most Type I (FeO-poor) chondrules, determining under what conditions metal could form in chondrules is of great interest. Assuming chondrules were formed from low temperature nebular condensate, we heated an anhydrous CI-like material at 1580°C in conditions similar to those of the canonical nebula (P_H2 = 1.3 × 10⁻⁵ atm). We reproduced many of the characteristics of Type IA and IIA chondrules but none of them contained any iron metal. In these experiments FeO was abundant in charges that were heated for as long as 6 h. At a lower temperature, 1350°C, dendritic/cellular metal crystallized from Fe-FeS melts during the evaporation of S. However, the silicate portion consisted of many relict grains and vesicles, not typical of chondrules.Evaporation experiments conducted at P_H2 = 1 atm and 1565°C produced charges containing metallic iron both as melt droplets and inclusions in olivine, similar to those found in chondrules. Formation of iron in these experiments was primarily the result of desulfurization of FeS. With long heating times Fe° was lost by evaporation. Apart from some reduction of FeO by kerogen to make metal inclusions within olivine grains, reduction of FeO to make Fe° in these charges was not observed.This study shows that under canonical nebular conditions FeS and iron-metal are extremely volatile so that metal-rich Type I chondrules could not form by melting “CI.” Under these conditions FeO is lost predominantly by hydrogen stripping and, due to the relative low abundance of hydrogen at low pressures, remains in the melt for as long as 6 h. Conversely, at higher total pressures (1-atm H₂) iron metal (produced mainly by the desulfurization of troilite) is less volatile and remains in the melt for longer times (at least 6 h). In addition, due to elevated pressures of hydrogen, FeO is stripped away much faster. These results suggest that chondrule formation occurred in environments with elevated pressures relative to the canonical nebula for iron metal to be present.     

Feldspathic clast populations in polymict ureilites: Stalking the missing basalts from the ureilite parent body

Polymict ureilites DaG 164/165, DaG 319, DaG 665, and EET 83309 are regolith breccias composed mainly of monomict ureilite-like material, but containing ∼2 vol% of feldspathic components. We characterized 171 feldspathic clasts in these meteorites in terms of texture, mineralogy, and mineral compositions. Based on this characterization we identified three populations of clasts, each of which appears to represent a common igneous (generally basaltic) lithology and whose mafic minerals show a normal igneous fractionation trend of near-constant Fe/Mn ratio over a range of Fe/Mg ratios that extend to much higher values than those in monomict ureilites. The melts represented by these populations are unlikely to be impact melts, because the ubiquitous presence of carbon in polymict ureilites (the regolith of the ureilite parent body) implies that impact melts would have crystallized under conditions of carbon redox control and therefore have highly magnesian mafic mineral compositions with constant Mn/Mg ratio. Therefore, these melts appear to be indigenous products of igneous differentiation on the ureilite parent body (UPB), complementary to the olivine-pigeonite residues represented by the majority of monomict ureilites.The most abundant population is characterized by albitic plagioclase in association with pyroxenes, phosphates, ilmenite, silica, and incompatible-element enriched glass. Model calculations suggest that it formed by extensive fractional crystallization of the earliest melt(s) of precursor materials from which the most magnesian (shallowest) olivine-pigeonite ureilites formed. A less abundant population, characterized by labradoritic plagioclase, may have formed from melts complementary to more ferroan olivine-pigeonite ureilites, and derived from deeper in the UPB. The third population, characterized by the presence of olivine and augite, could only have formed from melts produced at greater depths in the UPB than the olivine-pigeonite ureilites. Many other feldspathic clasts cannot be positively associated with any of these three populations, because their mafic mineral compositions exhibit carbon redox control. However, they may be products of early crystallization of basaltic melts produced on the UPB, before carbon was exhausted by reduction.Partial melting on the ureilite parent body was a fractional (or incremental) process. Melts were produced early in UPB history, and most likely extracted rapidly, thus preserving primitive chemical and oxygen isotopic signatures in the residues.     

Fractally Invariant Distributions and an Application in Geochemical Exploration

Fractal modelling has been applied extensively as a means of characterizing the spatial distribution of geological phenomena that display self-similarity at differing scales of measurement. A fractal distribution exists where the number of objects exhibiting values larger than a specified magnitude displays a power-law dependence on that magnitude, and where this relationship is scale-invariant. This paper shows that a number of distributions, including power-function, Pareto, log-normal and Zipf, display fractal properties under certain conditions and that this may be used as the mathematical basis for developing fractal models for data exhibiting such distributions. Population limits, derived from fractal modelling using a summation method, are compared with those derived from more conventional probability plot modelling of stream sediment geochemical data from north-eastern New South Wales. Despite some degree of subjectivity in determining the number of populations to use in the models, both the fractal and probability plot modelling have assisted in isolating anomalous observations in the geochemical data related to the occurrence of mineralisation or lithological differences between sub-catchments. Thresholds for the main background populations determined by the fractal model are similar to those established using probability plot modelling, however the summation method displays less capacity to separate out anomalous populations, especially where such populations display extensive overlap. This suggests, in the geochemical data example provided, that subtle differences in the population parameters may not significantly alter the fractal dimension.