Direct displacement measurements of submerged objects

The direct measurement of displacement time histories, obtained by tracking illuminated targets located on the exterior surface of submerged objects, has significant advantages for large-scale model tests. Many problems of interest require the simultaneous measurement of three-dimensional motions at several elevations on the same body or on several bodies in close proximity. Thus, optical tracking of targets in air or water or some combination of the two required the development of a general analytical formulation capable of converting local data measured from multiple camera locations to a global coordinate system for further analysis. The formulation presented is quite general and allows one to study the displacement behavior of single or multiple targets located on the same object or on different moving objects. As part of the analysis, calibration issues, possible sources of error and the optimal choice of camera location are discussed in detail. Data obtained from a large-scale model test of deepwater platform TLP tendons subjected to random design seas is used to illustrate the methodology. In the example, four different cameras were used to record the tendon displacements. To illustrate the methodology, five different camera combinations were used to compute the target location. The results indicate that the formulation is quite robust and that, although only a two-camera system is required to resolve the three-dimensional global coordinates of a single target, the use of a third camera can enhance the accuracy of the results. Guidelines for using cameras to track target motion were developed and are presented.     

Full scale decay test of a tanker: field data and theoretical analysis

This paper presents results from a full scale decay test made with a tanker in a relatively protected area in the Brazilian coast. In at least two tests the environmental loads (wind, waves and current) were very small and the time history of the surge motion was well behaved, making it possible to check some proposed models for the damping in the hull and mooring lines. Field data seem to confirm that the damping is indeed of the fluid viscosity type and the theoretical models are able to recover roughly 75% of the observed damping, the energy dissipation in the mooring lines being, by far, the major contribution. The remaining 25% are likely due to non modeled effects, such as the environment influence, which although small and not measured certainly exists, and to the friction between the mooring lines and the seabed.     

Molluscan lysosomal responses as a diagnostic tool for the detection of a pollution gradient in Tolo Harbour, Hong Kong

Sub-cellular perturbations in the lysosomal compartment of molluscan haemocytes were examined in mussels (Perna viridis), collected along a pollution gradient. The neutral red technique was validated using a well defined contamination gradient among indigenous populations from five stations along Tolo Harbour, Hong Kong. Condition indices (shell length:dry tissue wt) and tissue metal concentrations were also measured in an attempt to identify a relationship between contamination level and adverse physiological effects. Correlations were found between lysosomal retention time and condition along the pollution gradient. There were significant differences between mussels collected from stations on offshore islands and those collected from inner harbour sites (p < 0.05). There was, however, little correlation between metal concentrations and retention time or condition (p > 0.05).     

Historical record of heavy metals in a highly contaminated Mediterranean deposit: The Besòs prodelta

The Besòs prodelta, located around a highly populated area, receives the discharge of the Besòs River, one of the most contaminated rivers discharging into the Mediterranean sea. The record of heavy metals accumulated in this prodelta is studied to assess the sedimentary behaviour and the history of the anthropogenic heavy metals in the area.

Full-size image

dated sediments have allowed the identification of the sedimentation patterns and the elaboration of dated heavy metals and cenospheres profiles, which reflected the evolution of the anthropogenic impact in this marine environment. Sediments accumulated during the 18th and 19th centuries were already affected by a moderate heavy metal contamination. This contamination increased drastically in the sediments accumulated during the last decades. This data is well correlated with the increase in industrialisation, population and energy consumption in the Besòs drainage basin during the last century.     

Biogeographic characterization of Mediterranean and Black Seas faunal provinces using GIS procedures

To identify Mediterranean and Black Seas areas where similar marine faunal provinces occur, geographical distribution maps of 536 species of actual or potential interest to fisheries have been digitized, using GIS software, and three different ecological areas have been delimited by depth, separated by the 200 and 1000 m isobaths. Information on the species ranges was taken mainly from the maps and the texts of the FAO Species Identification Sheets covering the region, and complemented by other sources when necessary. All the distribution maps have then been overlaid by a grid of points at regular intervals every half degree of latitude and longitude. This allowed creation of a matrix of presence or absence of the species at each point from which species richness maps have been generated. The species richness in the Mediterranean proper shows the same negative gradient eastwards that has been observed for nutrients, while the low number of species in the Black Sea could be linked to the fragility and recent fast degradation of this ecosystem. Through the calculation of 65 dissimilarity indices from 50 contiguous points along the coastline and the species richness maps, the region has been divided into nine faunal provinces. These faunal provinces have then been compared with the ten Mediterranean and Black Seas divisions used by the GFCM for statistical purposes, revealing few differences between the two classifications. The definition of faunal provinces in a region when deciding upon Natural Management Areas, and the appropriate GIS approach to be followed, are discussed.     

Late Quaternary history of contourite drifts and variations in Labrador Current flow,Flemish Pass,offshore eastern Canada

Contourite drifts of alternating sand and mud, shaped by the Labrador Current, formed during the late Quaternary in Flemish Pass seaward of the Grand Banks of Newfoundland, Canada. The drifts preserve a record of Labrador Current flow variations through the last glacial maximum. A high-resolution seismic profile and a transect of four cores were collected across Beothuk drift on the southeast side of Flemish Pass. Downcore and lateral trends in grain size and sedimentation rate provide evidence that, between 16 and 13 ka, sediment was partitioned across Beothuk drift and the adjacent Flemish Pass floor by a strong current flow but, from 29 to 16 ka, sedimentation was more of a blanketing style, represented by draped reflections interpreted as being due to a weaker current. The data poorly resolve the low sedimentation rates since 13 ka, but the modern Labrador Current in Flemish Pass is the strongest it has been in at least the past 29 ka. Pre-29 ka current flow is interpreted based on reflection architecture in seismic profiles. A prominent drift on the southwestern side of Flemish Pass formed above a mid-Miocene erosion surface, but was buried by a mass-transport deposit after the penultimate glacial maximum and after drift deposition switched to eastern Flemish Pass. These findings illustrate the temporal complexity of drift sedimentation and provide the first detailed proxy for Labrador Current flow since the last glacial maximum.     

A systematic model for artificial reef site selection

Although artificial reefs are commonly used throughout the world as tools to mitigate for habitat alteration, their development is rarely subjected to a rigorous site selection process. We developed a simple site selection model using the following seven systematic steps: exclusion mapping, depth and slope verification, surficial substrate assessment, data weighting and the subsequent ranking analysis, visual transect surveys, benthic air‐lift sampling, and larval settlement collector deployment. American lobster (Homarus americanas) was selected as the target species for these investigations owing to the local commercial importance of the species. Results from each step in this process ultimately allowed us to select a site for an artificial reef at a target depth that received little wave action, had no slope, and possessed a surficial substrate type that could support the weight of a reef. The site also had the presence of a natural larval supply and low species diversity before reef installation. Each step in this site selection model was designed for easy adaptation to suit the needs of various artificial reef projects.     

A multi‐stock,length‐based assessment model for New Zealand rock lobster (Jasus Edwardsii)

We describe a multi‐stock, length‐based Bayesian assessment model for New Zealand spiny lobster (Jasus edwardsii) fisheries. This model allows simultaneous modelling of two or more stocks with a mixture of common and stock‐specific parameters: recruitment is always stock‐specific, but any other parameter can be specified as either common or stock‐specific. Common parameters are estimated from a wider base than they would be in a single‐stock model. The model's time step is flexible and can be changed during the period being modelled to accommodate better data quality in recent data. Other options include the capacity to estimate movements among stocks, allow density‐dependent growth, and choose among likelihood functions for the various data sets, between finite and instantaneous fishing dynamics and between two forms of selectivity curve.     

Parasitic barnacles (Cirripedia: Rhizocephala) from New Zealand off‐shore waters

Nine genera and species of rhizocephalans were recorded from the off‐shore waters around New Zealand. Mitochondrial and nuclear gene sequences were used to examine base differences between the European and New Zealand species of Parthenopea. Serial sections to study the internal structures of the reproductive organs were made for the genera Thylacoplethus and Thompsonia. Two species, Parthenopea australis n. sp. and Thylacoplethus novaezealandiae n. sp. are new to science and described in detail. Parthenopea australis n. sp. is the first rhizocephalan species recorded from the vicinity of active cold seeps. Three rhizocephalans could not be identified as they were parasitised by hyperparasitic cryptoniscine isopods. The decapodhost species comprised the taxa Paguridae, Lithodidae, Galatheidae, Chirostylidae, and Callianassidae.