Late Devensian ice‐marginal features in the central North Sea – processes and chronology

Palaeoglaciological reconstructions of the North Sea sector of the last British Ice Sheet have, as other shelf areas, suffered from a lack of dates directly related to ice‐front positions. In the present study new high‐resolution TOPAS seismic data, bathymetric records and sediment core data from the Witch Ground Basin, central North Sea, were compiled. This compilation made it possible to map out three ice‐marginal positions, partly through identification of terminal moraines and partly through location of glacial‐fed debrisflows. The interfingering of the distal parts of the glacial‐fed debrisflows with continuous marine sedimentation enabled the development of a chronology for glacial events based on previously published and some new radiocarbon dates on marine molluscs and foraminifera. From these data it is suggested that after the central Witch Ground Basin was deglaciated at c. 27 cal. ka BP, the eastern part was inundated by glacial ice from the east in the Tampen advance at c. 21 cal. ka BP. Subsequently, the basin was inundated by ice from northeast during the Fladen 1 (c. 17.5 cal. ka BP) and the Fladen 2 (16.2 cal. ka BP) events. It should be emphasized that the Fladen 1 and 2 events, individually, may represent dynamics of relatively small lobes of glacial ice at the margin of the British Ice Sheet and that the climatic significance of these may be questioned. However, the Fladen Events probably correlate in time with the Clogher Head and Killard Point re‐advances previously documented from Ireland and the Bremanger event from off western Norway, suggesting that the British and Fennoscandian ice sheets both had major advances in their northwestern parts, close to the northwestern European seaboard, at this time.     

Novel side chain methylated and hexacyclic hopanes: Identification by synthesis, distribution in a worldwide set of coals and crude oils and use as markers for oxic depositional environments

Novel side chain methylated and hexacyclic hopanes have been identified in coals and oils from around the world. Extended hopanes (>C₃₂) with an additional methyl in the side chain (“isohopanes”) were identified by comparison with synthetic standards. The major C₃₃-C₃₅ isohopanes are 31-methylbishomohopanes, 32-methyltrishomohopanes and 33-methyltetrakishomohopanes. Extended hopanes methylated at C-29 were not detected. The 17α(H),21β(H)-31-methyltrishomohopanes show four peaks on gas chromatography because of the extra asymmetric carbon at C-31. Like regular hopanes, the isohopanes extend beyond C₃₅. Low concentrations of novel hexacyclic hopanes having 35 or more carbons were also detected in oils and coal extracts. The C₃₅ hexacyclic hopanes were identified as 29-cyclopentylhopanes. Isohopanes are released from the kerogen by hydrous pyrolysis and hydropyrolysis. The 22S/(22S + 22R) ratio for 31-methylbishomohopanes and other isohopanes is around 0.60 at equilibrium in geological samples. They isomerize slightly more slowly than regular C₃₃ hopanes. Isohop-17(21)-enes, 2α-methylisohopanes and two series of rearranged isohopanes were tentatively identified. Isohopanes can be biodegraded to form the corresponding 25-norhopanes. When 25-norhopanes are not formed, the isohopanes are much more resistant to biodegradation than regular hopanes. In biodegraded oil seeps from Greece, 30-norisohopanes were tentatively assigned. The composition and relative abundance of C₃₃ and C₃₄ isohopanes in a worldwide set of coals and crude oils was determined. Isohopanes are abundant in coal and coal-generated oils, where they can account for more than 5% of all extended hopanes, and low in abundance in oils from source rocks deposited under anoxic conditions.     

Organic geochemistry of Miocene source rocks from the Banat Depression (SE Pannonian Basin, Serbia)

The origin, depositional environment and maturity of petroleum source rocks were determined via conventional whole rock and biomarker analysis of samples from wells in the Banat Depression, where the most important Serbian oil and gas fields are located. The organic matter (OM) in organic-rich upper Tertiary siltstones and marls consists predominantly of Type II kerogen. Numerous biomarker parameters indicated mixed algal-terrestrial OM, related to a brackish or freshwater environment, whose salinity decreased from Middle to Upper Miocene. The OM was deposited under variable redox conditions, reducing to sub-oxic.The wells in the Banat Depression experienced variable high rates of rapid heating, providing an opportunity for examining the applicability of different thermal indicators in a hyperthermal basin. Rock-Eval and numerous biomarker parameters indicate that the main stage of oil generation begins at ca.130 °C and vitrinite reflectance (Rc) ca. 0.63% and reaches a maximum at ca.145-150 °C and Rc ca. 0.72-0.75%, while the late stage of oil generation starts at ca.155 °C and ca. Rc 0.78%, which corresponds, depending on geothermal gradient, to relative depths of 2100-2300 m, 2600-2900 m and 3050-3100 m, respectively. The naphthalene and phenanthrene maturity parameters proved to be less applicable than the biomarker ratios, particularly in the early to moderate maturation range. The newly proposed parameter C(14a)-homo-26-nor-17α(H)-hopane/C₃₀hopane (C₃₀HH/C₃₀H) proved applicable to a wide range of maturity.     

Visualization of uncertainty in natural hazards assessments using an interactive cartographic information system

Natural hazard assessments are always subject to uncertainties due to missing knowledge about the complexity of hazardous processes as well as their natural variability. Decision-makers in the field of natural hazard management need to understand the concept, components, sources, and implications of existing uncertainties in order to reach informed and transparent decisions. Until now, however, only few hazard maps include uncertainty visualizations which would be much needed for an enhanced communication among experts and decision-makers in order to make informed decisions possible. In this paper, an analysis of how uncertainty is currently treated and communicated by Swiss natural hazards experts is presented. The conducted expert survey confirmed that the communication of uncertainty has to be enhanced, possibly with the help of uncertainty visualizations. However, in order to visualize the spatial characteristics of uncertainty, existing uncertainties need to be quantified. This challenge is addressed by the exemplary simulation of a snow avalanche event using a deterministic model and quantified uncertainties with a sensitivity analysis. Suitable visualization methods for the resulting spatial variability of the uncertainties are suggested, and the advantages and disadvantages of their implementation in an interactive cartographic information system are discussed.     

Characterization of accumulated precipitates during subsurface iron removal

The principle of subsurface iron removal for drinking water supply is that aerated water is periodically injected into the aquifer through a tube well. On its way into the aquifer, the injected O₂-rich water oxidizes adsorbed Fe²⁺, creating a subsurface oxidation zone. When groundwater abstraction is resumed, the soluble Fe²⁺ is adsorbed and water with reduced Fe concentrations is abstracted for multiple volumes of the injection water. In this article, Fe accumulation deposits in the aquifer near subsurface treatment wells were identified and characterized to assess the sustainability of subsurface iron removal regarding clogging of the aquifer and the potential co-accumulation of other groundwater constituents, such as As. Chemical extraction of soil samples, with Acid-Oxalate and HNO₃, showed that Fe had accumulated at specific depths near subsurface iron removal wells after 12 years of operation. Whether it was due to preferred flow paths or geochemical mineralogy conditions; subsurface iron removal clearly favoured certain soil layers. The total Fe content increased between 11.5 and 390.8 mmol/kg ds in the affected soil layers, and the accumulated Fe was found to be 56-100% crystalline. These results suggest that precipitated amorphous Fe hydroxides have transformed to Fe hydroxides of higher crystallinity. These crystalline, compact Fe hydroxides have not noticeably clogged the investigated well and/or aquifer between 1996 and 2008. The subsurface iron removal wells even need less frequent rehabilitation, as drawdown increases more slowly than in normal production wells. Other groundwater constituents, such as Mn, As and Sr were found to co-accumulate with Fe. Acid extraction and ESEM-EDX showed that Ca occurred together with Fe and by X-ray Powder Diffraction it was identified as calcite.     

Assessment of MTBE biodegradation in contaminated groundwater using C and C analysis: Field and laboratory microcosm studies

Radiolabelled assays and compound-specific stable isotope analysis (CSIA) were used to assess methyl tert-butyl ether (MTBE) biodegradation in an unleaded fuel plume in a UK chalk aquifer, both in the field and in laboratory microcosm experiments. The ¹⁴C-MTBE radiorespirometry studies demonstrated widespread potential for aerobic and anaerobic MTBE biodegradation in the aquifer. However, δ¹³C compositions of MTBE in groundwater samples from the plume showed no significant ¹³C enrichment that would indicate MTBE biodegradation at the field scale. Carbon isotope enrichment during MTBE biodegradation was assessed in the microcosms when dissolved O₂ was not limiting, compared with low in situ concentrations (2 mg/L) in the aquifer, and in the absence of O₂. The microcosm experiments showed ubiquitous potential for aerobic MTBE biodegradation in the aquifer within hundreds of days. Aerobic MTBE biodegradation in the microcosms produced an enrichment of 7‰ in the MTBE δ¹³C composition and an isotope enrichment factor (ε) of −1.53‰ when dissolved O₂ was not limiting. However, for the low dissolved O₂ concentration of up to 2 mg/L that characterizes most of the MTBE plume fringe, aerobic MTBE biodegradation produced an enrichment of 0.5-0.7‰, corresponding to an ε value of −0.22‰ to −0.24‰. No anaerobic MTBE biodegradation occurred under these experimental conditions. These results suggest the existence of a complex MTBE-biodegrading community in the aquifer, which may consist of different aerobic species competing for MTBE and dissolved O₂. Under low O₂ conditions, the lower fractionating species have been shown to govern overall MTBE C-isotope fractionation during biodegradation, confirming the results of previous laboratory experiments mixing pure cultures. This implies that significant aerobic MTBE biodegradation could occur under the low dissolved O₂ concentration that typifies the reactive fringe zone of MTBE plumes, without producing detectable changes in the MTBE δ¹³C composition. This observed insensitivity of C isotope enrichment to MTBE biodegradation could lead to significant underestimation of aerobic MTBE biodegradation at field scale, with an unnecessarily pessimistic performance assessment for natural attenuation. Site-specific C isotope enrichment factors are, therefore, required to reliably quantify MTBE biodegradation, which may limit CSIA as a tool for the in situ assessment of MTBE biodegradation in groundwater using only C isotopes.     

A double slip non-coaxial flow rule for viscous-plastic Cosserat materials

We propose a double slip non-coaxial plastic model within the framework of a Cosserat continuum theory. In a Cosserat continuum, a material point possesses the degrees of freedom of an infinitesimal rigid body: two translations and one rotation in 2D. We formulate the plastic model into viscous-plastic constitutive relationships and illustrate the viscous-plastic behaviour of the model by means of numerical solution of a simple shear problem.     

Hydrologic Variability and Its Control of Phytoplankton Community Structure and Function in Two Shallow,Coastal, Lagoonal Ecosystems: The Neuse and New River Estuaries,North Carolina,USA

Hydrologic conditions, especially changes in freshwater input, play an important, and at times dominant, role in determining the structure and function of phytoplankton communities and resultant water quality of estuaries. This is particularly true for microtidal, shallow water, lagoonal estuaries, where water flushing and residence times show large variations in response to changes in freshwater inputs. In coastal North Carolina, there has been an increase in frequency and intensity of extreme climatic (hydrologic) events over the past 15 years, including eight hurricanes, six tropical storms, and several record droughts; these events are forecast to continue in the foreseeable future. Each of the past storms exhibited unique hydrologic and nutrient loading scenarios for two representative and proximate coastal plain lagoonal estuaries, the Neuse and New River estuaries. In this synthesis, we used a 13-year (1998–2011) data set from the Neuse River Estuary, and more recent 4-year (2007–2011) data set from the nearby New River Estuary to examine the effects of these hydrologic events on phytoplankton community biomass and composition. We focused on the ability of specific taxonomic groups to optimize growth under hydrologically variable conditions, including seasonal wet/dry periods, episodic storms, and droughts. Changes in phytoplankton community composition and biomass were strongly modulated by the amounts, duration, and seasonality of freshwater discharge. In both estuaries, phytoplankton total and specific taxonomic group biomass exhibited a distinctive unimodal response to varying flushing rates resulting from both event-scale (i.e., major storms, hurricanes) and more chronic seasonal changes in freshwater input. However, unlike the net negative growth seen at long flushing times for nano-/microphytoplankton, the pigments specific to picophytoplankton (zeaxanthin) still showed positive net growth due to their competitive advantage under nutrient-limited conditions. Along with considerations of seasonality (temperature regimes), these relationships can be used to predict relative changes in phytoplankton community composition in response to hydrologic events and changes therein. Freshwater inputs and droughts, while not manageable in the short term, must be incorporated in water quality management strategies for these and other estuarine and coastal ecosystems faced with increasing frequencies and intensities of tropical cyclones, flooding, and droughts.     

On Solar-Wind Electron Heating at Large Solar Distances

We study the temperature of electrons advected with the solar wind to large solar distances far beyond 1 AU. Almost nothing is known about the thermodynamics of these electrons from in-situ plasma observations at these distances, and usually it is tacitly assumed that electrons, due to adiabatic behaviour and vanishing heat conduction, rapidly cool off to very low temperatures at larger distances. In this article we show, however, that electrons on their way to large distances undergo non-adiabatic interactions with travelling shocks and solar-wind bulk-velocity jumps and thereby are appreciably heated. Examining this heating process on an average statistical basis, we find that solar-wind electrons first cool down to a temperature minimum, which depending on the occurrence frequency of bulk velocity jumps is located between 3 and 6 AU, but beyond this the lowest electron temperature again starts to increase with increasing solar distance, finally achieving temperatures of about 7×10⁴ K to 7×10⁵ K at the location of the termination shock. Hence these electrons are unexpectedly shown to play an important dynamical role in structuring this shock and in determining the downstream plasma properties.     

Advances towards improved low-frequency tree-ring reconstructions, using an updated Pinus sylvestris L. MXD network from the Scandinavian Mountains

The dendrochronological use of the parameter maximum density (MXD) in Pinus Sylvestris L., at high latitudes, has provided valuable insights into past summer temperature variations. Few long MXD chronologies, from climatically coherent regions, exist today, with the exception being in northern Europe. Five, 500-year-long, Fennoscandian, MXD chronologies were compared with regard to their common variability and climate sensitivity. They were used to test Signal-free standardization techniques, to improve inferences of low-frequency temperature variations. Climate analysis showed that, in accordance with previous studies on MXD in Fennoscandia, the summer temperature signal is robust (R ²?>?50 %) and reliable over this climatically coherent region. A combination of Individual standardization and regional curve standardization is recommended to refine long-term variability from these MXD chronologies and relieve problems arising from low replication and standardization end-effects.