Scaling property of regional floods in New South Wales Australia

Regional flood frequency analysis (RFFA) is often used in hydrology to estimate flood quantiles when there is a limitation of at-site recorded flood data. One of the commonly used RFFA methods is the index flood method, which is based on the assumptions that a region satisfies criterion of simple scaling and it can be treated homogeneous. Another RFFA method is quantile regression technique where prediction equations are developed for flood quantiles of interest as function of catchment characteristics. In this paper, the scaling property of regional floods in New South Wales (NSW) State in Australia is investigated. The results indicate that the annual maximum floods in NSW satisfy a simple scaling assumption. The application of a heterogeneity test, however, reveals that NSW flood data set does not satisfy the criteria for a homogeneous region. Finally, a set of prediction equations are developed for NSW using quantile regression technique; an independent test shows that these equations can provide reasonably accurate design flood estimates with a median relative error of about 27%.     

Paleomagnetism of the Middle–Late Jurassic to Cretaceous red beds from the Peninsular Thailand: Implications for collision tectonics

Jurassic to Cretaceous red sandstones were sampled at 33 sites from the Khlong Min and Lam Thap formations of the Trang Syncline (7.6°N, 99.6°E), the Peninsular Thailand. Rock magnetic experiments generally revealed hematite as a carrier of natural remanent magnetization. Stepwise thermal demagnetization isolates remanent components with unblocking temperatures of 620–690 °C. An easterly deflected declination (D = 31.1°, I = 12.2°, α₉₅ = 13.9°, N = 9, in stratigraphic coordinates) is observed as pre-folding remanent magnetization from North Trang Syncline, whereas westerly deflected declination (D = 342.8°, I = 22.3°, α₉₅ = 12.7°, N = 13 in geographic coordinates) appears in the post-folding remanent magnetization from West Trang Syncline. These observations suggest an occurrence of two opposite tectonic rotations in the Trang area, which as a part of Thai–Malay Peninsula received clockwise rotation after Jurassic together with Shan-Thai and Indochina blocks. Between the Late Cretaceous and Middle Miocene, this area as a part of southern Sundaland Block experienced up to 24.5° ± 11.5° counter-clockwise rotation with respect to South China Block. This post-Cretaceous tectonic rotation in Trang area is considered as a part of large scale counter-clockwise rotation experienced by the southern Sundaland Block (including the Peninsular Malaysia, Borneo and south Sulawesi areas) as a result of Australian Plate collision with southeast Asia. Within the framework of Sundaland Block, the northern boundary of counter-clockwise rotated zone lies between the Trang area and the Khorat Basin.     

Life cycle assessment of pyrolysis–gasification as an emerging municipal solid waste treatment technology

Waste-to-energy technologies are considered as one of the key waste treatment technologies due to their energy and heat recovery efficiencies from the waste. A number of research studies were accomplished to understand the potential environmental burdens from emerging waste treatment technologies such as pyrolysis–gasification (PG). The aim of this study was to examine the PG of municipal solid waste (MSW) treatment process through a life cycle assessment (LCA) method. The study also includes a comparative LCA model of PG and incineration to identify the potential environmental burdens from the existing (incineration) and emerging (PG) waste treatment technologies. This study focused on ten environmental impact categories under two different scenarios, namely: (a) LCA model of PG and (b) comparative LCA model of PG and incineration. The scenario (a) showed that PG had significant environmental burdens in the aquatic eco-toxicity and the global warming potential impact categories. The comparative scenario (b) of PG and incineration of MSW showed that PG had comparatively lower potential environmental burdens in acidification, eutrophication, and aquatic eco-toxicity. Both LCA models showed that the environmental burdens were mainly caused by the volume of the thermal gas (emissions) produced from these two technologies and the final residue to disposal. Therefore, the results indicate that the efficiency and environmental burdens of the emerging technologies are dependent on the emissions and the production of final residue to the landfill.     

Identification of waste management development drivers and potential emerging waste treatment technologies

Application and development of municipal solid waste treatment technology depends on various socio-economic and environmental factors. All those factors are work as development drivers for waste management systems. The study aims to identify key drivers from case studies of waste management development trend in Sweden. Social, economic and environmental drivers are identified and presented in this study. The study identifies personal behaviour, local waste management practice, consumption and generation of waste as the key social drivers. Resource value of waste, economic benefit from waste treatment facilities and landfill tax have been acknowledged as economic drivers for developing waste treatment technology. Moreover, global climate change, environmental movement and awareness have been working as environmental drivers for developing various waste treatment methods in Sweden. In addition, the study aims to analyse emerging waste treatment technologies based on a number of literature review and questionnaire survey. Dry composting, pyrolysis-gasification, plasma arc, and anaerobic digestion have been identified as potential emerging technologies for waste management systems in Sweden.     

Assessment of Trace Metal Contamination of Drinking Water in the Pearl Valley,Azad Jammu and Kashmir

The aim of this study was to assess trace metal contamination of drinking water in the Pearl Valley, Azad Jammu and Kashmir (Pakistan). The objectives were to determine physical properties and the dissolved concentration of five trace metals, i. e., lead, copper, nickel, zinc, and manganese, in drinking water samples collected from various sites of municipal water supply, natural water springs and wells in the valley. Concentrations of the metals in the water samples were determined by flame atomic absorption spectrometry. Results showed physical parameters, i. e., appearance, taste and odor within acceptable limits and pH was between 5.5 and 7.0. The observed concentrations of the metals varied between sources of water samples and between sampling sites. Maximum dissolved concentration observed was 4.7 mg/L for Pb and Mn, 4.6 mg/L for Zn, 2.9 mg/L for Ni and 2.8 mg/L for Cu. The observed concentrations of the metals were compared with the World Health Organization's guideline values for drinking water. Overall, the quality of water samples taken from the water springs at Mutyal Mara and Bonjosa was good; however, the water quality was unsuitable for drinking in Kiraki, Kharick, and Pothi Bala localities particularly. Finally, the authors discuss possible causes for increased concentrations of the trace metals in drinking water in the study area.     

Rock slope stability and excavatability assessment of rocks at the Kapikaya dam site,Turkey

This paper presents the slope stability and excavatability assessment of rocks at the Kapikaya dam site that contains diabases. Both field and laboratory studies were carried out. The field study involved detailed discontinuity surveys. Laboratory tests were carried out to determine uniaxial compressive strength, Young's modulus, unit weight, point load strength index and shear strength parameters of discontinuities.Kinematical and numerical analyses were performed to determine right and left slopes at the dam site. According to kinematical analyses, the types of planar and wedge failure are not expected at the site. Also, shear strength reduction analyses was carried out using Phase² for the right and left slopes at the dam site. According to results of numerical analysis, Strength Reduction Factor (SRF) of the right and left slopes are 8.08 and 6.5 respectively and any rotational failure will not occur. The excavation category of the diabases was determined as easy ripping for the right slope and easy-hard ripping for the left slope.     

Statistical analysis of different chemical elements in groundwater of northwestern Saudi Arabia

A total of 72 water samples were collected from the sub-surface aquifer system in the Midyan basin and analyzed for 24 major, minor and trace elements. Histograms and normal quantile plots were used to delineate the sub-populations of the chemical constituents in the studied groundwater samples. Some of the elements such as Al, K, Ca, Mg, Na and Cl have concentrations that could be linked to the weathering of the surface rock strata. On the other hand, the elements like As, Pb and Sb have concentration, that can be linked to agricultural practices in the area. The use of simple statistical analysis, frequency histograms, and Q-Q plots were useful for the detection and evaluation of elemental constituents in the groundwater of the study area.     

Water use, growth and yield of green gram under rainfed upland crop sequences in Gangetic plains of indian sub—tropics

A field experiment was conducted to study the effect of different crop sequences on water use, growth and yield of green gram (Vigna radiate (L) Wilezek) during 1992–93 and 1993–94 under rainfed upland condition in Indo-Gangetic plains of West Bengal. Green gram sown in the month of March as pre-rainy (summer) season crop, as and when the winter crops vacated the land, produced highest dry matter of 372 gm^-2 which was significantly highest in black gram-yellow sarson sequence. The results of the field experimentation revealed that green gram gave highest grain yield to the extent of 10.80 q/ha when sown after black gram (rainy season) followed by yellow sarson (winter season) while the crop produced 10.63 q/ha under sesame-yellow sarson sequence. Highest water use of 267 mm was achieved in green gram under black gram-yellow sarson sequence and the crop gave water use efficiency of 4.07 kg ha^-1mm^-1 under black gram-yellow sarson sequences.     

Evaluation of gridded precipitation data in the Hindu Kush–Karakoram–Himalaya mountainous area

The accurate measurement of precipitation is crucial for hydrological studies. This is especially true for the Hindu Kush–Karakoram–Himalaya (HKKH) mountain region, which is characterized by high spatiotemporal precipitation variability. The paucity of raingauges makes it difficult to measure precipitation in this region precisely. We conducted evaluation of TMPA 3B42V7 and APHRO 1101 in the HKKH area on a daily basis at a spatial resolution of 0.25°?×?0.25°, using 27 raingauges. Statistically, the largest error in the gridded data arose mainly from elevation, followed by volumetric error and Nash–Sutcliffe efficiency. Overall, the TMPA data have a poor correlation with ground observations in the HKKH area, especially for higher altitudes. The western areas are relatively more underestimated and the Karakoram shows higher frequency of bias in the TMPA retrievals. This method could help improve the satellite precipitation estimation algorithm as it considers local physiography and climatic factors.